Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6
Number: SAR50001 piece floor lifter with crane boom and chain hoistSCHMALZ VacuMaster Basic 250 kg+ SWF SKB080 electric chain hoist+ SCHMALZ EVE-TR 4 AC3 Dry Runner Vacuum Pump+ Crane boom ALU 325 kgdismountedDelivery by freight carrier against surcharge possible (1 x 359,00 €)Condition: used condition, must be reassembled and set up Hpnovzl more
3
Imaging: 10-25µm, inspection speed: 18-110cm²/s, x/ y-travel resolution: 1µm, max. PCB dimensions: 510x460mm, PCB thickness: 4mm, max. PCB weight 3kg, connected load: 3kVA, length: 1480mm, width: 1220mm, height: 2085mm, weight: 850kg, including SMART E-cube loading magazine and accessories. Bzucfmj more
6
Here we offer a post Muellenders Bowl feeders and linear conveyors. Post Joseph horizontal conveyor control consisting of: MSI-200 right MSI-200 links MLF-G2 Control control unit MK AS 0.8 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) Bapz9uvpm9 We can answer questions on the phone for you. Written order possible by email or fax more
3
Manufacturer: Shibuya Type: SBM 351 Name: Solder ball Mounter Baoloeayyz Year of construction: 2003 Power: 6.0 KVA 2009 in overseas box packed and stored more
3
There are hundreds. You are bidding on a Tünkers clamp, type V50. 1 A40 T12 45-120 degrees. Built in 2007 Shipping is possible on request. Baizusblig more
6
Vibratory bowl feeder, Fabr. Feldpausch, boiler diameter 130 mm, shell depth 60 mm, with control unit PS 6, set up for small washer, approx. 5 mm = D, d = 3 mm. Vibration-feeder trough, Fabr. Feldpausch, length 200mm, with control unit PS 6. L722l more
6
Linear drive unit speed-line with motor and accessories - Festol Brand: NEFF Antriebstechnik type: WM60-000-MM20-0600-1060-8s 1 3iskgnitx Id.Nr.: 08 10100560 Series No.: 39730307 Nameplates, see technical data There are 3 units available. The linear unit comes from a Commons resolution. It is located in apparently good condition. Part is sold without guarantee or warranty. The linear unit can be seen in 75334 Straubenhardt, d 11. more
3
Working width: 330mm, workpiece weight: 390kg max., exhaust stack diameter: 150mm, exhaust volume: 400-800m³/h, operational voltage: 400V, compressed air supply: 6-8bar, connected load: 19.5kW, length: 3620mm, width: 1040mm, height: 1790mm, weight: 500kg. Dgks2bp more
6
We quote a system of 1 spiral conveyor, mounted on 3 steel feet. This conveyor has 8 spirals and 8 exits for high quantity conveying rolls for roller bearings. The rolls for which the system was built in assembling machines have diameter 3,0 mm and 15,3 mm lenght. The complete system is in very good shape, less used. The upper part of spiral conveyors are out of hard plastic. Integrated are 8 spirals in 720° up to the exit. In the system is also vibration controller of type EA with potentiometer... more
6
Vibration spiral conveyors (4071) manufacturer: de Prague Model: 1611-EP / 0.75-1 Year of manufacture: 2010 230 V 50 Hz 120 VA Filling volume: 0.75 1 l Capacity approx.: 45 pieces per minute Operating pressure: 6,3 bar Screw sizes Max head diameter: 12 mm Max length: 35mm Schaftdurchmesserbereich: 1.5 6. 3mm Approximate weight: 30kg 9yjkacxhn more


Placement ...
every day

New machines via email!

Be informed!
3
Hundreds are available. You are bidding on a Tünkers clamp, type V50. 1 BR2 Z A40 T12 120 degrees. Year 2011 Shipping is possible on request. 2qyo7q more
6
Manufacturer: Siemens Model: SPL Bivsucjvm Year of manufacture: 03/2000 Type: SPL Pressure: 5 bar Flow rate: 50 NI/min Voltage: 230/115 V Output: 0.4 kW External dimensions: 1, 05m x 0, 55m x 1, 20m Lxwxh more
3
Circuit board dimensions: 180-600x110x600mm, working area: 70x150mm, soldering volume: 175kg, solder bath temperature: 350°C, connected load: 6kW, length: 1330mm, width: 1257mm, height: 1793mm. Fyzd0jihe more
6
We quote a system of 2 spiral conveyors, mounted on steel pillar. Both conveyors have 8 spirals and 8 exits for high quantity conveying rolls for roller bearings. The rolls for which the system was built in assembling machines have diameter 3,0 mm and 15,3 mm lenght. The complete system is in very good shape, less used. The upper part of spiral conveyors are out of hard plastic. Integrated are 8 spirals in 720° up to the exit. In the system is also vibration controller (for each conveyor) of typ... more
6
Vibration spiral conveyors (4070) manufacturer: de Prague Model: 0511-EP / 0.75-1 Iwfdsg7 Year of manufacture: 2004 230 V 50 Hz 120 VA Filling volume: 0.75 1 l Capacity approx.: 45 pieces per minute Operating pressure: 6,3 bar Screw sizes Max head diameter: 12 mm Max length: 35mm Schaftdurchmesserbereich: 1.5 6. 3mm Approximate weight: 24kg more
3
Frame mount: 180x280mm, number of zones: 12, infeed height: +/-50mm, heating: 5°C/s, chip probe dimensions: 3.2x10x0.7mm, rod probe dimensions: 1.9x100mm, film probe dimensions: 20x30mm, length: 750mm, width: 510mm, height: 400mm, weight: 30kg. Ba7faamonz more
6
We quote a system of 1 spiral conveyor, mounted on 3 steel feet. This conveyor has 1 spiral for high quantity conveying steel rings. The rings have outside diameter of 18,3 mm, bore diameter 13,4 mm and are 2,0 mm thick. The complete system is in very good shape, less used. The upper part of spiral conveyors are out of hard plastic. Integrated is 1 spiral in 720° up to the exit. In the system is also vibration controller of type EA with potentiometer for changing vibration intensity. In the syst... more
6
(1) Dimensions pallet: 120-500x50-400mm, pallet weight: 5kg max., conveyor height: 850mm, conveyor speed: 10m/min max., compressed air supply: 6-8bar, nitrogen supply: 6-10bar, solder temperature: 330°C max., connected load: 30.5kW, voltage: 400V, current: 45.5A, frequency: 50/60Hz, fuse rating: 3x100A max., length: 3580mm, width: 1525mm, height: 1800mm, weight: 1.1t. (2) Two Magazine Loader ASYS AES 03 D, [...] 2005, Transport height: 850mm, transport width: 460mm, dimensions magazine: 535x530x... more
6
Programmable stroke z-travel: 34.3mm, output: 3800placements/h max., placements per programm: 25000 max., board size: Workholder: 457x457mm, transport: 406x508mm, machining area component: 26.7x26.7mm, usable components: Chip R, Chip C, MELF, SOT, SOIC, VSOP, LCC, PLCC, QFP, length: 1070mm, width: 1320mm, height: 1820mm, weight: 500kg. 8clczpvhf more
1
Voltage: 220V, frequency: 50/60Hz, power: 2000VA, year of construction: unknown. Dvt7w3 more
3
grid dimensions: approx. 8-40mm, wire diamters: up to 1mm. Pkbowdm more
3
Board size: approx. 500x400mm. There are three systems of the years 1989-1991 for sale. 7dxxiruy9 more
1
Capacity: up to 4500 parts/h, tape width: 8-72mm, component rotation: 0°/±90°/180°. M32oe9j more


Placement ...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close