Condition: used, Binding Store are pleased to offer this A1 condition Plockmatic Morgana SR90/ TR90 Bookletmaker and Trimmer. This model has just been removed from a charity in-plant that has closed its printing division. This Bookletmaker has been fully maintained and has only done 110,000 booklets from new. Deb Exp Tewdwxfskjut The Plockmatic SR90/TR90 is a powerful and extremely quiet hand feed booklet-maker. It can produce booklets from A3 to A4 and A4 to A5 size booklets and has a staple and fold capacity of 22 sheets of 80gsm enabling booklets of up to 88 printed pages to be created. It has an very easy to use LCD panel to enable automatic size changes and has heavy duty staple heads and a staple cartridge capacity of 5000. The delivery of the finished booklets is from a motorised conveyor. If you are looking for a great value booklet maker thats very user friendly then this could be the machine for you. Format: A3 to A4 and A4 to A5 size Equipment: Booklets from A3 to A4 and A4 to A5 size

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Duob Exorit H Rep Tkot Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Condition: good (used), Year of construction: 2016, We request your binding offer. Available from: immediately Delivery conditions: from location – EXW Paderborn district Easy removal, large doors, forklift (1.6 t) on site Payment conditions: Payment prior to collection Dob Expewgad Ne Tkjut Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2009, Folding machine MBO K 800.2/6 S-KTL Year: 2009 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder: FP 120 - Excluding pump - Machine was connected to a centralised air system Folding unit MBO K 800.2/6 S-KTL - Parallel fold unit with 6 buckle plates - Slitter shaft cassette - First cross fold Dujb Exswaxquop Tkot - Buckle fold underneath first cross fold - Second cross fold to the left Delivery Palamides Alpha 700 Year: 2010 - Vertical stack delivery with pressing Max. mechanical speed: 10 - 180 m/min Maximum size: 780 x 1200 mm Minimum size: 170 x 250 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,099 h, Functionality: fully functional, cutting length (max.): 650 mm, cutting width (max.): 370 mm, paper weight (min.): 110 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Max. format: 650 × 370 mm Min. format: 210 × 210 mm Dusb Expewglrfs Tkst Paper processing Paper weight: 110–350 g/m² Speed: 50 sheets/min MACHINE DETAILS Dimensions: 3,040 × 1,020 × 1,115 mm Weight: 450 kg Counter readings Total paper count: 389,000 Total cut count: 5,700,000 Total crease count: 17,600 Total cross crease count: 23,400 Total operating hours: 1,099 h 15 min Power supply Voltage: 230 V Frequency: 50 Hz Current consumption: 2.7 A Power consumption: 550 W FEATURES - Suction/blowing air feeder with alignment section - LCD control panel - CPM-01 cross perforation module - 6 integrated cutters (2 edge cuts, 4 card cuts) - 80 memory locations for repeat jobs - Ultrasonic double-feed detection - Diversion tray - Test run program - Print mark detection

Condition: good (used), Offer consisting of: Paper counting machine Vacuumatic Vicount 2, built in 1998, clean condition Dusb Exowb Uybop Tket

Condition: used, Year of construction: 1991, The Polar TR 1 ER 145-3, manufactured in 1991 with the serial number 6191311, is a robust and efficient Transomat/Unloader designed for automatic unloading of cut material. Currently dismantled and located in Germany, this machine has a size of 750 x 1,050 mm and is built for continuous operation with a heavy-duty industrial design. It features an adjustable unloading height and forms stacks directly on a pallet, ensuring efficient and organized material handling. The gentle lift and swivel movement protect the material during the unloading process. Its space-saving construction makes it an ideal solution for businesses looking to optimize their workspace while enhancing productivity. Format: 750 x 1.050 mm Djb Exsv Tnq Ejp Tkeut Equipment: Polar TR 1 ER 145-3 ??? Transomat / Unloader - Application: Automatic unloading of cut material - Adjustable unloading height - Stack formation on pallet - Gentle material handling via lift and swivel movement - Heavy-duty industrial design for continuous operation - Space-saving construction

Condition: used, Year of construction: 2006, MBO Combination Folding Machine K 700/6 SKTL year 2006 Configuration: - round pile feeder R 700 - NAVIGATOR control - 6 folding buckles - 2 crossfold units - noise reduction hoods - vacuum pump - without delivery Special equipment: Dueboi En I Ao Exp Tkot - additional buckle plate after 1st cross fold Technical specifications: mechanical speed: 10 - 210 m/min size range max.: 68 x 120 cm size range min.: 17 x 20 cm

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Production speed: up to 4,500 booklets/h Format range Open format – min.: 120 × 210 mm Open format – max.: 356 × 610 mm Finished format – min.: 75 × 120 mm Finished format – max.: 305 × 356 mm Paper processing Paper weights: 52–300 g/m² Feed capacity per station: 65 mm MACHINE DETAILS Application range: collating, creasing, folding, stapling, and trimming Dimensions & Weight Dimensions: 4,009 × 3,252 × 1,972 mm Weight: 2,111 kg Piece counter: approx. 7.5 million pieces Power supply Voltage: 230 V Frequency: 50 Hz Current consumption: 5.3 A Power consumption: 980 W Duob Exp Towglffjket EQUIPMENT - Two DSC 10 collating towers with a total of 20 stations - DBMS-F2 creasing and folding unit - DBMS-S stitching unit with two Hohner stitching heads - DBMS-T front trimmer - DKT-200 head and foot trimming unit - Production of a wide range of booklet sizes and thicknesses possible

Condition: excellent (used), Offer consisting of: Aster 180, built in 2006, Max. speed: 180 cycles/min - Min. sheet size: 75 x 150 mm - Max. sheet size: 320 x 420 mm Dobowb Uwys Exp Tkjut

Condition: used, Year of construction: 2003, The BVM Compacta Trend 6020 is a high-performance shrink-wrapping machine designed for efficient and reliable packaging tasks. Manufactured in 2003, this machine is currently in production and located in Germany. It features side sealing and operates in a fully automatic function mode, ensuring consistent and precise wrapping. The Compacta Trend 6020 is suitable for a variety of product applications, including paper, packaging machines, tape strips, and stacks. With a capacity of 60 packages per minute, it can handle materials with a width of 500 mm (19.7 inches) and a length of 450 mm (17.7 inches). Its side sealing capability and inline operation make it an ideal choice for high-volume packaging tasks, ensuring that products are securely wrapped and protected. Format: 650 mm Equipment: Shrink-wrapping machine with side sealing Function mode fully automatic Product applications Paper, for packaging machines, for tape strips, stacks Further properties with side sealing, inline, foils Capacity 60 p/min Width 500 mm (19.7 in) Length Dusb Exp Tjwc T N Rjket 450 mm (17.7 in)

Condition: used, Year of construction: 2003, HEIDELBERG Stitching Unit HM 400 year 2003 Standard equipment: - without stitching heads Dusb Exeqpwcgjp Tkot Technical specifications: compatibel with: HEIDELBERG ST 400 saddle stitcher

Condition: used, Year of construction: 2005, The Wohlenberg Master E, manufactured in 2005, is a high-performance gathering machine designed for efficient bookbinding processes. Located in Germany, this machine features a connecting bridge and operates at speeds ranging from 1,000 to 6,500 cycles per hour, with an inline speed of up to 8,000 cycles per hour. It includes a dust extraction station with a suction nozzle to maintain a clean working environment. The Master E can handle product heights from 140 to 435 mm and document widths from 75 to 370 mm. It is equipped with a gathering machine, the Sprinter 7010, which has 16 gathering stations and is controlled by a PLC system. The machine features a high-performance spine preparation tool, 18 clamps, a small format device, and a pressing station. It also includes electronic double sheet control, missing sheet control, and can handle product widths from 105 to 320 mm with a minimum paper weight of 70 gsm. Additional features include a main milling station, backlining station, scoring station, and cross stacker delivery. The machine can handle product thicknesses from 2 to 62 mm and includes a manual feed station with a maximum layer thickness of 3 mm and a clamp opening range from 12 to 90 mm. For binding, it features a hotmelt spine gluing station with PUR spine gluing capabilities, a hotmelt side gluing station, and a cover feeder. The machine also includes two pressing stations and is compatible with the Kolbus HD 140-P, manufactured in 1996. This Wohlenberg Master E is ideal for businesses seeking a reliable and efficient bookbinding solution. Format: 75 x 320 mm Equipment: Connecting Bridge Djbsv S E Aco Exp Tkeut Speed: 1,000 - 6,500 cycles/hour Dust extraction station with suction nozzle Maximum capacity: 1,000 - 6,500 cycles/hour Product height: 140 - 435 mm Document width: 75 - 370 mm Speed (inline): 1,000 - 8,000 cycles/hour Gathering Machine Sprinter 7010 (16 stations) 16 Gathering Stations Control system: PLC High-performance spine preparation tool 18 Clamps Small format device Pressing station Electronic double sheet control Product width: 105 - 320 mm Paper weight min.: 70 gsm Missing sheet control Main milling station Backlining station Scoring station Cross stacker delivery Product thickness: 2 - 62 mm Manual feed station Maximum layer thickness: 3 mm Clamp opening: 12 - 90 mm Hotmelt spine gluing station PUR spine gluing Hotmelt side gluing station Cover feeder 2 Pressing Stations Kolbus HD 140-P,1996

Condition: used, The Wohlenberg 76 SPM is a cutting machine designed for precise and efficient cutting tasks. Manufactured by Wohlenberg, this machine is currently in stock and located in Germany. With a cutting size of 760 mm, the 76 SPM is well-suited for a variety of cutting applications. Dsb Exswd Shnsp Tksut Format: 760 mm Equipment: Program defect

Condition: used, Year of construction: 2005, The Lintec LPM 300 GT, manufactured in 2005 with the serial number 9267-1W, is a specialized printing machine designed for high-quality UV letterpress printing. Currently dismantled and located in Germany, this machine supports a 6-color UV letterpress printing process and can handle a maximum material width of 300 mm, with a maximum printing width of 280 mm. It is capable of printing lengths up to 280 x 240 mm and operates at a maximum speed of 7,200 impressions per hour, ensuring efficient production. The machine is equipped with a UV drying system featuring 6 GEW UV dryers to quickly cure the ink, and it includes 1 rotary die-cutting station for precise cutting tasks. The integrated rewinder with a slitting function (5 knives) allows for efficient post-processing, while the unwinder with an end-position sensor ensures smooth material feeding. Additional equipment includes Rotometrics pressure control at the die-cutting station for accurate cutting, metal-based polymer plates for durability, and 11 magnetic printing cylinders for versatile printing options. This Lintec LPM 300 GT is well-suited for businesses requiring a reliable and specialized UV letterpress printing solution. Format: 300 mm Equipment: Dueb Ejwa Aytexp Tkot Printing process: 6-color UV letterpress Maximum material width: 300 mm Maximum printing width: 280 mm Maximum print length (repeat): 280 x 240 mm Maximum speed: 7,200 impressions per hour UV drying system: 6 GEW UV dryers Die-cutting: 1 rotary die-cutting station Rewinder: Integrated with slitting function (5 knives) Unwinder: With end-position sensor Additional equipment: Rotometrics pressure control at the die-cutting station Metal-based polymer plates 11 magnetic printing cylinders

Condition: used, Year of construction: 2018, The Heidelberg Stahlfolder CH 56, manufactured in 2018, is a versatile and high-performance folding machine designed to handle a wide range of folding tasks with precision and efficiency. This machine, currently dismantled and located in Germany, is capable of processing sheets up to 560 x 900 mm in size. It features 6 folding pockets and can perform various folding types, including accordion (Leporello), cross, roll (wrap), parallel, and combination folds. The cross fold capability ranges from a minimum of 140 x 180 mm to a maximum of 560 x 450 mm. Additionally, it includes 1 extra downstream folding pocket and a small format device for added flexibility. The edge trimming unit ensures clean and accurate cuts, while the shingled (stream) delivery system organizes the output efficiently. Equipped with a CPH 70 Integrated Press Station and a touchscreen control panel, this machine allows for easy job setup and adjustments. It also features fully automated fold plate positioning, noise reduction hoods, and a modular construction that allows for future upgrades. The integrated batch counter and job memory further enhance its operational efficiency, making it a reliable choice for businesses looking to improve their folding capabilities. The reliable feeder can handle various paper types and weights, ensuring consistent performance across different applications. Format: 560 x 900 mm Equipment: 6 bags Cross fold: Max. 560 x 450 mm, Min. 140 x 180 mm Folding types: Accordion (Leporello), Cross, Roll (Wrap), Parallel, and Combination folds 1 additional downstream folding pocket Small format device Edge trimming unit Shingled (stream) delivery CPH 70 Integrated Press Station Touchscreen control panel for easy job setup and adjustments Fully automated fold plate positioning Duob Ejwcarfexp Tkst Noise reduction hoods Modular construction for future upgrades Integrated batch counter and job memory Reliable feeder for various paper types and weights

Condition: used, Year of construction: 2016, The Gallus TCS 250, manufactured by Gallus in 2016, is a high-performance label printing press designed for efficiency and precision. With a format of 265 mm and a print count of 2 million, this machine is currently available in stock and located in Germany. This press is equipped with a range of advanced features to meet various printing needs. It operates at a speed of 11,000 impressions per hour and has a cylinder circumference of 254 mm, accommodating a web width of 265 mm. The hotfoil stamping speed is 8,000 cycles per hour, with a maximum print size width of 265 mm and a minimum of 130 mm, allowing for precise format adjustments in increments of 0.01 mm. The machine operates at a voltage of 400V for the main unit and 230V for peripherals, with a net frequency of 50Hz. Key features include a feeding unit with web cleaning, corona pretreatment for enhanced adhesion, and trimming and suction capabilities. The press can handle paper weights ranging from 80 to 180 g/qm2 and carton up to 300 g/qm2 with a maximum thickness of 0.3 mm. It is compatible with commercially available adhesive bonds and supports UV offset printing. The configuration includes 4 printing units, 1 coating unit, 1 rotary die cutter unit, and a rotary hotfoil embossing unit. Additional features include web inspection via the Powerscope 4000 manual system, a Uviterno Coldstar water-cooled drying model with UV capabilities, 4 trimming knives, mesh pulling monitoring, and an IR dryer. The maximum web diameter is 800 mm, and the press is equipped with remote maintenance capabilities, a plate tool, and maintenance tools for ease of use and upkeep. Format: 265 mm Equipment: Speed: 11.000 T/h Cylinder circumference: 254mm Web Width: 265mm Dsb Expevfx A Ao Tksut Hotfoil Stamping Speed: 8,000 cycles/h Max print size width: 265 mm Min print size width: 130 mm Format length graduation: 0,01 mm Machine Voltage: 400V Voltage Peripherals: 230V Net Frequency: 50hz Feeding Unit Web Cleaning Corona Pretreatment Trimming and Suction Paper: 80 bis 180 g/qm2 Carton: up to 300g/qm2 at max. 0.3mm Adhesive Bonds: commercially available UV Offset Printing Units: 4 Coating Units: 1 Rotary Die Cutter Units: 1 Rotary Hotfoil Embossing Unit Web Inspection Web Inspection type: Powerscope 4000 manual Drying Model: Uviterno Coldstar Water cooled IR or UV: UV Trimming Knives: 4 Mesh Pulling Monitoring IR Dryer Max. Web Diameter: 800mm Remote Maintenance Plate Tool Maintenance Tools

Condition: used, The MUTOH VALUEJET VJJ-1624 is a compact printer manufactured in Japan, known for its reliable technology. It supports two types of ink: Eco Ultra and Universal Mild Solvent (UMS). This printer is equipped with Mutoh Intelligent Interweaving (i????) and DropMaster printing technology, ensuring high-quality output. It is suitable for producing certified prints that meet Indoor Air Comfort standards. The VALUEJET VJJ-1624 offers sellable production speeds of up to 20.5 square meters per hour and can handle media with a maximum width of 162.4 cm. Currently, it is located in Germany and is available in the Printshop. Dsbsv Di Slo Exp Tkeut Format: 162.4cm Equipment: Compact printer Made-in-Japan, with proven technology Two types of ink Eco Ultra and Universal Mild Solvent (UMS) Mutoh Intelligent Interweaving (qm2) & DropMaster printing technology included Suitable for producing certified prints Indoor Air Comfort Saleable production speeds of up to 20.5 qm2/h Max. media width 162.4cm

Condition: used, Year of construction: 2007, The Perfecta 168 HTVC + Basa 7 is a robust and efficient machine designed for high-performance cutting and finishing tasks. Manufactured by Perfecta, this model was built in 2007 and is renowned for its durability and precision. The machine supports a format of 1680 mm, making it ideal for a variety of applications, and is currently mounted and located in Germany, ensuring easy accessibility for users in the region. The Perfecta 168 HTVC + Basa 7 features a touchscreen for easy and intuitive programming, enhancing user control and efficiency. Equipped with a monitor screen, it provides clear visual feedback and monitoring of operations. The machine includes an air table made of stainless steel, ensuring smooth material handling and precise cutting. Both left and right side tables are equipped with air functionality and are made of stainless steel, further enhancing material flow and precision. The machine is equipped with safety cells, ensuring operator safety during operation. The stack lift type is a pallet feeder, facilitating efficient material loading and unloading, and the ruettel/jogger type is BASA 7, which ensures effective material alignment and stacking. The Perfecta 168 HTVC + Basa 7 is a reliable choice for industries requiring precision cutting and finishing. Its advanced features and robust construction make it a valuable asset for any professional setting. Format: 1680 mm Equipment: Type: Perfecta 168 HTVC Program with touch screen Monitor Screen Air table (stainless steel) Air table Side tables with air (stainless steel): Left & right Safety cells Duob Exevghkljp Tkjt Stack Lift Type: Pallet feeder Jogger Type: BASA 7

Condition: used, Year of construction: 1994, The Duplo DC 8000 S, manufactured in 1994, is a reliable finishing machine currently in stock and located in Germany. This model handles a format of 35 x 45 cm. Notable features include eight stations for versatile finishing operations and a DBM 100 stitching unit for efficient booklet making. Additionally, the machine is equipped with a compressor to ensure smooth and consistent operation. Debevfx Uxs Exp Tkjut Format: 35 x 45 cm Equipment: 8 stations DBM 100 stitching unit Compressor

Condition: used, The Agrafix Stitching Machine is a reliable wire stitching machine designed for efficient binding. Manufactured by Agrafix, this model is located in Germany, with pricing available upon request. The machine is in good condition with no damages and features a format of 300 x 430 mm. It is equipped for wire stitching, ensuring durable and professional binding results. Format: 300 x 430 mm Equipment: Good condition without any damage Wire stiching Dusb Expjv Amcls Tkot

Condition: used, Year of construction: 1992, The Hang 107-30, manufactured in 1992, is currently in stock and located in Germany. This machine features infinitely variable drill speed and infinitely variable table stroke speed. It is equipped with a 4 Kopf Papierbohrer and allows for quick clamping of the paper drills. The machine is powered by a three-phase motor operating at 380 V. The delivery terms are FCA. Equipment: 4 head paper drills Dsb Expsvfxvie Tkeut with three-phase motor 380 V Infinitely variable drill speed and infinitely variable table stroke speed Quick clamping of the paper drills

Condition: used, Year of construction: 2025, The KMK ZLFM-1080SC Automatic Laminating Machine with powder cleaning, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 320 x 290 mm to a maximum of 1080 x 880 mm. Key features include optional add-ons such as a chain knife cutting system and a UV enhancement unit. The machine is equipped with a front-layer mechanism to prevent curling of thin paper and includes a sheet drawing function. It also features a non-stop feeder and stacker, ensuring continuous operation. Additional highlights include a tool temperature controller and optional double lamination and embossing units. The machine comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 320 x 290mm max. 1080 x 880mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Condition New machine Non-Stop Feeder Non-stop Stacker Mold temperature controller Thin paper anti curling Front lay Sheets drawing Optional = Chain knife cutting system Optional = Double lamination, Embossing unit Optional = UV enhancement unit Djb Exp Tevfx Dtokjut

Condition: used, The Eurofold MULTIGRAF 252 Creaser/Perforator, manufactured by Eurofold, is a machine with a format of 450 mm currently in stock and located in Germany. This machine can handle stock weights from 40 to 500 gsm and is capable of processing up to SRA3 paper. It comes equipped with one creaser multi-tool and one new perforating tool. The delivery terms are FCA. Format: 450 mm Equipment: This used machine has 1 creaser multi tool and 1 New perforating tool Will take up to SRA3 paper Duob Expovfx H Us Tkjt Stock weights from 40-500gsm

Condition: used, Year of construction: 2000, The Polar 115 ED, manufactured in 2000 with the serial number 703221, is part of a complete cutting line designed for maximum efficiency and reduced manpower. Located in Germany, this cutting line includes several components, all manufactured in 2000: the Polar 115 ED, Polar RA-4, Polar TR130ER-4, and Polar LW 1000-4. The line features automatic jogging, cutting, stacking, and lifting, providing a fully automated workflow that enhances productivity and improves ergonomics. The Polar 115 ED has a maximum cutting width of 1,150 mm, a maximum pile height of 165 mm, and a table height of 900 mm. It includes a color display with programmable control, an air table for smooth material handling, safety light barriers, hydraulic clamping, and two-hand operation for blade safety. The Polar RA-4 handles formats up to 75 x 105 cm, offering automatic jogging and alignment of paper piles with an air roller to remove trapped air between sheets, improving stacking quality and providing an ergonomic working height. The Polar TR130ER-4, also handling formats up to 75 x 105 cm, automatically stacks trimmed layers onto pallets and can be integrated with the cutting process to save time, featuring high edge precision with a movable pallet tip to reduce production costs significantly. The Polar LW 1000-4 has a maximum pallet size of 800 x 1,200 mm, a platform size of 840 x 1,270 mm, a maximum lifting height of 850 mm, and a load capacity of 1,000 kg. It automatically lifts and lowers paper piles, enhancing operator ergonomics and increasing cutting workflow efficiency with a power consumption of 0.75 kW. This complete cutting line is ideal for businesses seeking to optimize their cutting processes with reliable and efficient machinery. Format: 1150 mm Equipment: Complete Cutting Line Overview: - Components: - Polar 115 ED (Year 2000) - Polar RA-4 (Year 2000) - Polar TR130ER-4 (Year 2000) - Polar LW 1000-4(Year 2000) - Line Features: - Automatic jogging, cutting, stacking, and lifting - Fully automated workflow for maximum efficiency - Reduced manpower and improved ergonomics Individual Units: 1. Polar 115 ED (Year 2000): Dusb Exov S E Aiep Tkjt - Max. cutting width: 1,150 mm - Max. pile height: 165 mm - Table height: 900 mm - Dimensions (L ?? W ?? H): approx. 2,650 ?? 2,540 ?? 1,650 mm - Weight: approx. 3,200 kg - Features: - Color display with programmable control - Air table for smooth material handling - Safety light barriers - Hydraulic clamping - Two-hand operation for blade safety 2. Polar RA-4 (Year 2000): - Max. format: up to 75 ?? 105 cm - Functions: - Automatic jogging and alignment of paper piles - Air roller for removing trapped air between sheets - Features: - Improved stacking quality - Ergonomic working height 3. Polar TR130ER-4 (Year 2000): - Max. format: up to 75 ?? 105 cm - Functions: - Automatic stacking of trimmed layers onto pallets - Can be integrated with cutting process for time saving - Features: High edge precision with movable pallet tip - Reduces production costs significantly 4. Polar LW 1000-4: 4. Polar LW 1000-4: - Max. pallet size: 800 ?? 1,200 mm - Platform size: 840 ?? 1,270 mm - Max. lifting height: 850 mm - Load capacity: 1,000 kg - Power consumption: 0.75 kW - Dimensions (L ?? W ?? H): approx. 1,300 ?? 1,440 ?? 1,500 mm - Weight: approx. 550 kg - Features: - Automatic lifting/lowering of paper piles - Enhances operator ergonom