Year of construction: 1970, Condition: good (used), Functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work Dslq Devuhumet Hlokl general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: as good as new (ex-display), used log band saw CTR520, demonstration machine at a special price, up to 63cm log diameter, Djlqjvrvq Re Dt Hlokl manual cutting program, highest cutting precision, height adjustment using a hand crank, with bimetal saw band for all types of wood, max. log diameter 600 (520) mm, max. board width 460 mm, motor output S1 4 kW, cutting length basic version 3.6 m, saw band 3110 x 27 x 0.9 mm, cutting length extension section 2.25 m, weight 218 kg, CE, 3 kW S1, 218 kg

Condition: like new (used), Functionality: fully functional, Completely restored guidework for debarker, as good as new Dkjlq Deq Dp Eret Hlol

Condition: used, Year of construction: 1992, Functionality: unexamined, For sale a round log sorting line by Holtec. Equipped with a feeder for logs up to 16 meters long, a Cambio 66 debarker, a system for cutting logs into short logs, a Bruks feed reducer and 20 boxes for logs from 2.5 to 8 meters long. The line was dismantled about two months ago and transported to our site. Possibility of assembling and starting the line at the customer's - all elements are numbered. Very attractive price! Interested parties are invited to contact me Dkelq Dtov Iv T Do Hlel

Condition: excellent (used), Linck high performance creel type DS 71 Frame width 710 x 710 mm. Stroke 500 mm. Speed 320 rpm. Hydraulic roller lift with adjustable roller pressure. Hydraulic feed infinitely variable from 0 - 13 m/min Automatic overhang adjustment of the saw frame. Dkolqeuqmu Ho Dt Hlel Electromagnetic remote control. Jansen hydraulic saw tensioner with saw hook. Motor 55 KW with countershaft. Hydraulically driven splitting wedge. Hydraulic clamping carriage with hydraulic auxiliary carriage. Dismantled and loaded free on truck.

Condition: refurbished (used), AKE Log bandsaw groups with or without chipper canter unit We can offer different constellations of AKE Log bandsaw type 245 as below: A. Bandsaw groups with 2 , 3 or 4 bands B. Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. C. Dslqjiv Stio Dt Hlekl Complete sawline ( type SuperSaver ) Bandsaw groups with 2 , 3 or 4 bands and chipper-canter unit. Plus board edger unit. Capacity up 35000 m3 of ready sawn wood per year and single shift

Condition: like new (used), Storti wood cutting line - Italian production - edger with a central disc with a pneumatic jump RM 400 S - crosscut saw TP2 - multisaw Multibi R16 - minimum material length 700 mm - maximum element width 500 mm - maximum element height 140 mm - line feed speed 30 m/min - total power 110 kW - space requirement 26 x 5.5 m TECHNICAL PARAMETERS: 1 Strorti RM400 S edger - cutting width max 330 mm - cutting height max 140 mm Dkelq Dtemv Ehzj Hlel - element width max 500 mm - maximum element length 5000 mm - engine power 3 x 11 kW - seven steel toothed bottom pulling rollers - two upper toothed pulling rollers - pneumatic material pressure - the jump of the central disc is pneumatic - feed table 5000 mm roll width 500 mm diameter 80 mm - receiving table with edging 5200 mm roll width 500 mm roll diameter 140 mm 2 Storti TP2 crosscut saw - width of the finished element max 1600 mm - width of the finished element min 700 mm - cutting height min / max - 20/140 mm - disc diameter 600 mm - spindle diameter 30 mm - engine power 2 x 7.5 kW - feed roller table 2570 mm width of rollers 500 mm diameter 100 mm - diameter of connections 2 x 160 mm 3 Multisaw Storti Multibi R 16 - material width max 150 mm - material height max 140 mm - engine power 2 x 22 kW - disc diameter max 300 mm - spindle diameter 50 mm - spindle height 160 mm - hydraulically adjustable feed - hydraulic side material pressure - two upper pneumatic clamps - connector diameters 2 x 220 1 x 160 mm - receiving conveyor 2000 mm - cross conveyor table 3200 x 1100 mm

Condition: as good as new (ex-display), Demonstration machine Solid log band saw for a log diameter of up to 71 cm, can be extended indefinitely with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment can be controlled from the operator panel. 3.8-inch touch LCD display for height adjustment. Saw unit suspended on both sides for more stability and better precision. CE tested. Technical data: max. log diameter 71 cm max. board width 67 cm Motor output S1 5.5kW Cutting length basic version 2.1m Cutting length extension section optional 3 m, 1 m Dkslovr I Rceq Dt Hlel Weight 550 kg

Condition: used, Year of construction: 2007, Functionality: fully functional, cutting length (max.): 5 mm, overall weight: 3,000 kg, type of motor: electric motor, Includes: Dkolq Dtov Stdbo Hlsl -Complete log sawmill -Log loading ramp -Roller track 6 meters It is in excellent condition and fully functional

Condition: excellent (used), PTO shaft drive feed speed 28m/min. Dkolqjv H U N Is Dt Hlel Stem diameter: 60 - 360 mm

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc. Dkjlq Dt Hetqd Naoljl

Condition: used, Functionality: unexamined, We sell complete Primultini sawmill with sharpening workshop. We also have other woodworking equipment. We offer the possibility to physically view them, for any information please contact us Djlqov R Dr Hs Dt Hlokl

Year of construction: 1988, Condition: good (used), RIVO / Risstaler setting machine fully automatic setting machine Type: GSA Year of manufacture 1988 Blade width: 80-160 mm Blade length: max. 150 cm Blade thickness: 1.5 - 2.5 mm Tooth pitch: max. 25 mm Setting width: 0.6 - 1 mm Weight: 290 kg Location: Austria, near Linz Dolq Dtjv In Nqe Hljkl

Condition: as good as new (ex-display), Block band saw Hauslhof CTR800S, demonstration machine Dslq Dt Hevr I Riolokl Serial No. 69/21/007 The machine has the following accessories: 2 x extension section for block saws CTR800S, 3 m Ammeter for CTR Saw band guide electrically adjustable for CTR Irrigation pump with automatic switch-on for CTR Saw band tensioning device hydraulic Pre-cutting device

Year of construction: 1994, Condition: good (used), - quantity of knives 4 - lenght of knives 720 mm Dkjlouxuqgsq Dt Hlsl - diameter of drum 900 mm

Condition: good (used), Complete sawmill equipment as follows: 1. 4-strand log infeed / log feeder with separator with infeeder with log turner with alignment tapered roller conveyor Total conveyor length: approx. 10.5 meters Width: approx. 4 meters for log lengths of 3-12 meters 2. Fully hydraulic Weiss Hdt clamping carriage Dslq Dtev I A T Rj Hlokl with auxiliary carriage with tracks Track width: 90 cm 3. Wurster & Dietz GSU frame saw 71 cm clearance 500 mm stroke with infeed with templates with hydraulic saw clamp with approx. 80 sawblades (approx. 50 new/like new) with Wurster & Dietz riving knife with 55 kW drive motor 4. Wurster & Dietz QSW10 cross-cut saw for sideboards/boards Year of construction 1994 05. Gate roller conveyor with 5 pullers Puller hydraulically raised/lowered Total length: 10 meters Total width: 2.6 meters Roller width: 1.5 meters with ejector/ejector brake for main material 06. Puller table, 5-strand Length: 4.5 meters Width: 2.4 meters 07. Inclined conveyor, 5-strand Conveyor length: 2.7 meters Width: 4 meters 08. Inclined conveyor/cross conveyor, 5-strand Conveyor length: 2.6 meters Width: 4.5 meters 09. Double edger Wurster & Dietz FR7 0-line right Left-hand machine Max. passage width: 790 mm Max. passage height: 160 mm with 22 kW drive motor with 2 cross-cut saws (one defective) with roller feeder with laser device with chip separator with puller left and right with length sorting 3 boxes 10. Disposal line/chipper system/drum chipper Klöckner KTH 120x400L2WT with 30 kW drive motor with conveyor belt approx. 8 m long with vibrating chute approx. 15 m long with screening before the drum chipper with double scraper conveyor with distributor for sawdust and wood chips   11. Stacking system consisting of: Tilt destacking Separator Conveyor belt for slats Conveyor belt for boards Feeding table Cross conveyor Separator/steep conveyor Alignment roller conveyor Cross-cut saws Stacking system + external feed (2 conveyor belts, total approx. 31 meters + spiral roller conveyor) with Control cabinets 12. Vollmer CNE circular saw sharpening machine 13. Meinert PH6D 1983 frame saw sharpening machine 14. Vollmer Cana/H frame saw sharpening machine 15. Baljer & Zembrod sorting cart 16. Other electrical and hydraulic components, accessories, and spare parts available immediately Location: Austria, near Villach

Condition: used, machine/vehicle number: G-BBS123462bR, Jonsored log band saw, year of manufacture approx. 2000, good condition, standard equipment 550 mm, 5.5 kW, 400 V, 5500 mm table length, 200 kg Djlq Dtjvw Ecae Hlskl Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Sorting Cart / Sorting Crane Dslq Dtov I A Ihe Hlekl Baljer & Zembrod Crane ASX1 with cross-cut saw (has not been used for a long time) with cutting rack with tracks with cable drum (1 year old) available immediately Location: Austria, near Villach

Condition: used, machine/vehicle number: G-BBS120179H, Mobile sawmill Pilous CTR800H, year of manufacture 20019, very good condition Prices subject to change, errors, printing and typesetting errors reserved Delq Dtovw Eb No Hljkl

Condition: good (used), Stacking system consisting of: Tilt destacking system Separator Dkjlqev I A Dis Dt Hlsl Conveyor belt for slats Conveyor belt for boards Feeding table Cross conveyor Separator/inclined conveyor Alignment roller conveyor Cross-cut saws Stacking system + external feeder (2 conveyor belts, total length approx. 31 meters + spiral roller conveyor) with control cabinets Fully functional - available immediately Location: Austria, near Villach

Condition: used, Log band saw Pilous CTR1000H40, year of manufacture 2017, standard equipment, 15 kW, 7600 mm cutting length, 5350 mm, 2500 kg Dslevrvk Doq Dt Hlskl Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), 5-strand inclined conveyor/cross conveyor Conveyor length: 2.6 meters Width: 4.5 meters Available immediately Location: Austria, near Villach Dkoljv I Ax Hjq Dt Hljl

Condition: good (used), 5-strand inclined conveyor Conveyor length: 2.7 meters Width: 4 meters Available immediately Location: Austria, near Villach Dkjlq Dov I Axtst Hljl

Condition: good (used), 5-strand haul-off table Length: 4.5 meters Width: 2.4 meters With rollers (non-driven) Delov I Awisq Dt Hljkl Fully functional - available immediately Location: Austria, near Villach

Condition: good (used), Gate roller conveyor with 5 pullers Pullers can be raised/lowered hydraulically Total length: 10 meters Total width: 2.6 meters Roller width: 1.5 meters With ejector/ejection brake for main material Dslq Dt Hev I Avfjlskl Fully functional - available immediately Location: Austria, near Villach