Used surface finishing machines for sale (174)

Condition: ready for operation (used), Gross volume: 120l, max. swivel element: 2560mm, diameter working container: 640mm, discharge height screening machine: 880mm, connected load: 11kW, drive power rotary table 4kW, length: 2620mm, width: 2620mm, height: 2320mm. An on-site inspection is possible. Nwjdpjy E S Evsfx Airoh

Condition: new, Eurotec Innovation RT27 – Rotary Dryer / Drying System (Made in Germany) Machine type: Rotary Dryer Manufacturer: Eurotec Innovation GmbH Model: RT27 The RT27 rotary dryer by Eurotec Innovation is a powerful and efficient solution for drying workpieces after vibratory finishing. By using drying media (granulate) and direct heating, parts are dried quickly, gently, and without stains. The system not only enables drying, but also simultaneous post-polishing of the components – ensuring optimal surface quality in a single process step. 🔧 Technical Data: Gross volume: approx. 270 liters Effective volume: approx. 140 liters Drive power: approx. 1.6 kW Heating power: max. 4 kW Power supply: 400V – 16A – 50 Hz Advantages: ✔ Fast and cost-efficient part drying ✔ Spot-free surfaces after vibratory finishing ✔ Drying and polishing in one operation ✔ Integrated screening section for automatic part separation ✔ Switchable between batch and continuous operation ✔ Spiral-shaped rising bowl bottom for gentle processing ✔ Expandable with extraction systems, sound enclosure, and automation 🏭 Applications: Drying of parts directly after the vibratory finishing process Polishing and post-processing Reduction of stains and water marks Protection against flash rust through complete drying Processing of complex geometries The RT27 is the ideal complement to vibratory finishing systems and ensures an efficient, reliable, and reproducible drying process – perfect for industrial applications. Additional variants and custom configurations are available upon request. From development to production, we supply all products from a single source – all “Made in Germany”. ----- Please feel free to contact us – we will be happy to advise you without obligation. ----- Nwjdpfx Aisf Sqfbsroh The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is for presentation purposes only. Contract negotiations are conducted via telecommunications (email, fax, phone, messaging platforms). We will first provide you with a non-binding offer, including our general terms and conditions as well as information on the right of withdrawal and legal notice, before any purchase or contract is concluded.

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Nsdpsnl Ekrofx Airjwh Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Year of construction: 2014, condition: excellent (used), The Ultimate Solution for High-Performance Industrial Manufacturing Are you seeking a machine that delivers both formidable power and pinpoint precision? The PME 1500x1000 is meticulously engineered to the strictest industrial benchmarks, offering an impressive 78.6 kW of installed power for uninterrupted, high-efficiency production. Why Choose the PME 1500x1000? Quad-Turbine Performance: Outfitted with four 11 kW heavy-duty motors, this equipment is designed for rigorous workloads and reliable output. Substantial Electrical Capacity: Built for a robust 160 A supply, the PME 1500x1000 effortlessly handles intensive operations without compromise. Precision Pneumatics: Operating at a minimum of 6 bar, with an integrated air quality management system, this model ensures smooth and dependable performance with every cycle. Nodpfxjy Eilyo Airowh Engineered for Longevity: Featuring a 1 1/2" supply line design and ISO-compliant air filtration, each component is optimized for continuous uptime and low maintenance demands. Technical Highlights: - Total Installed Power: 78.6 kW - Network Compatibility: 5-wire, power factor 0.9 - Clean Operation: ISO/DIS 8573-1, Class 4 air quality - Efficiency: Air consumption 16–36 m³/hour ADVANCE YOUR PRODUCTION CAPABILITY The PME 1500x1000 is more than just a machine—it's a strategic investment in your business’s growth. Benefit from the hallmark of Finnish engineering blended with high-speed, industrial-grade performance. Contact us now for a comprehensive demonstration and competitive quote!

Year of construction: 2015, condition: good (used), machine/vehicle number: 31650, Used cleaning machine Make: MTM Nwodpfxev Htn Ae Aireh Type: RoJet Year of manufacture: 2015

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: 2706CNC00217, The JAINNHER CNC cylindrical grinding machine is designed for grinding the external surfaces of cylindrical and conical parts in automatic and manual modes using longitudinal and plunge grinding. Nodpfx Aoy Exi Ioirjwh

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; These plants are fit for the treatment with aqueous detergent solutions, as: Nodpfx Aiswdfyqerswh Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Year of construction: 2011, condition: ready for operation (used), An industrial multi-bath continuous spray cleaning system Pero for components is available. Belt width: 500mm, clearance height: 300mm, max. belt load: 40kg/m, loading height: 900mm, belt speed: 2.8m/min, cleaning volume flow: 320l/min, cleaning pressure: 2bar, machine dimensions X/Y/Z: approx. 5100mm/2100mm/2300mm. Documentation available. An on-site inspection is possible. Nwjdsy Ax T Ijpfx Airsh

Year of construction: 2007, condition: ready for operation (used), A top-loading batch cleaning system Render is available. Pump capacity: 140l/min, cleaning bath fill volume: 130l, max. operating temperature: 130°C, load capacity: 120kg, connected load: 16kW, machine dimensions X/Y/Z: approx. 1350mm/1200mm/1350mm, weight: approx. 350kg. Includes a transport cart. Documentation available. An on-site inspection is possible. Nwedpfx Aijy Ax Tzorjh

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) - Laser class 1 - CE compliant, according to EU directives Nwodpfxovyc Rms Aireh - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Condition: good (used), 1 x chip vibrating screen Schwanog Rapid SBM 63 GDS Year of manufacture: 1977 with blower In good technical and visual condition. Accessories: 3 x screens of your choice Dimensions: L: 970 x W: 390 x H: 110 mm Nwsdpfxsy Atkzo Airjh The machine can be inspected under power at any time.

Condition: used, Year of construction: 2017, machine/vehicle number: A1711012, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust Nwodpfx Aisvv Hryersh from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Year of construction: 2001, condition: used, Technical details: Nedpoyk Ur Iofx Airswh plate thickness: mm sheet width: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m

Year of construction: 1998, condition: excellent (used), 1 x Centrifuge Aryma / Rimann 2.5 liters Nwedpfx Aeigni Ijirjh Year of manufacture: 1998 with open basket in excellent optical and technical condition Technical data: Max. capacity: 3 kg / 2.5 liters The machine can be inspected while running at any time.

Year of construction: 2003, condition: used, 1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Nwodjyfumnjpfx Airsh Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932 *

Year of construction: 2011, condition: excellent (used), ILSA IK20 metal cleaning machine for modified alcohol (solvent) Single basket In good condition Nwsdpfxjyztxis Aireh Test run possible

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Nwedsyabxyopfx Airoh Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Nodpfxeyazhze Airswh

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Nsdpfxju Smd Eo Airswh - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Nwodoxd A I Ajpfx Airoh Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, Pulsed laser cleaning device with 200-watt laser power significantly more effective for cleaning and rust removal applications than continuous lasers such as those used in welding lasers. - View and test with us now - Top-quality device at a top price, available from our showroom - For paint removal, rust removal, stainless steel weld seam cleaning, etc. - 200-watt pulsed laser / air-cooled - German menu navigation - Immediately available Nwodpjuhcd Refx Aireh Also check out our attractive leasing and hire purchase offers. Sale only to commercial customers Machine dimensions approx.: Width: 60 cm Height: 120 cm Depth: 110 cm Weight: approx. 100 kg

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Njdpfx Aiswm Elforowh Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Year of construction: 2021, condition: used, functionality: fully functional, complete 3-stage washing system, entirely made of stainless steel 1st stage: washing with hot water 2nd and 3rd stage: rinsing with cold water Nwsdpfx Aisyxgppjrsh workpiece passage height 2100 mm, depth 800 mm

Condition: good (used), Year of construction: 2001, Offer 25484 Manual Injector Blasting System with Suction and Media Recovery in Compact Design Technical Specifications: - Blasting Chamber: - Negative pressure cabinet with viewing window - Working area: approx. W 1100 x H 550–700 x D 660 mm - Viewing window: 320 x 500 mm - Access via two side doors - Blasting chamber accessible by hand using two work gloves for operating the blasting gun - Blasting gun type: 910 Standard – Nozzle: 8 mm - Air consumption: 6 bar (l/min) - Media Recovery System: - Type RG WS 85 - Suction capacity: 8.5 m³/min - Separation with cyclone principle – coarse filter screen / magnetic separator - Drive: 220 V / 0.37 kW - Dedusting Unit: - Type DUST – EX 603 - Equipped with: - Bag filter Nwsdpfx Aoyap Iceirsh - Dust drawer - Manual shaking device - Drive: 220 V / 0.55 kW - Required space: approx. W 1400 x H 1600 x D 1400 mm - Weight: approx. 350 kg

Year of construction: 2019, condition: ready for operation (used), An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026. Nedpjyuyu Nefx Airswh