Used tool grinders for sale (189)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Ksdpfxjyhxccs Anwjnc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 6043, Year 2007 with Fanuc Series 16Oi Country of origin: CH Voltage: 3x400V/50Hz Dimensions: 216x160x216 cm Net machine weight: 3200 kg TECHNICAL SPECIFICATIONS X-axis: 300 mm Y-axis: 220 mm Z-axis: 180 mm Resolution: 0.0001 mm Clamping capacity: 0.5 – 20 mm Knedpfx Aezxz R Esnwoc Grinding wheel diameter: 0.1 – 16 mm Maximum clamping length: 270 mm Grinding wheel diameter: 150 mm A-axis (grinding wheel rotation): -195 / +30° B-axis (grinding head rotation): -75 / +135° C-axis (spindle indexing): 0.001° W-axis: 620 mm U-axis: 500 mm Grinding wheel speeds, continuous: from 2000 min-1 to 7200 min-1 Spindle power: 7 kW Fire extinguishing system – CO₂ Kraft & Bauer – Not verified and no guarantee of functionality. To be serviced by you. Unless otherwise indicated, the technical data is provided without any commitment.

Condition: excellent (used), Year of construction: 2014, 2014 Schneeberger Sirius HPM 6-Axis Tool Grinding Machine With Fanuc Series 31I-Model A5 CNC Control Gear Tooth Production Steptec GFQ 170E Swivel Spindle Workhead. Travel: 'X' Axis = 420mm, 'Y' Axis = 310mm, 'Z' Axis = 340mm. 'A' Axis (Rotation) = 2,400°/S. ISO40, Centre Height 150mm. Swivel Axis 'B' = 90°, Swivel Axis 'C' = 180°. (1) Hitema Stand Alone Air Cooled Liquid Chiller Type ENR.018/CX.SST.WP.HW.RV.DD.GALV (340kg, 2020). (1) Hyfra Pedia Sigma 13-S Stand Alone Water Cooling Chiller (200kg, 2014). VAS 7041, 400 Litre Stand Alone Filtration System (800mm x 1,300mm x 600mm, 400kg). Sirius S/No. 21828. Kodpfxoz E R T Hj Anwjnc Quantity of Assorted Arbors, Collets, Grinding Attachments & Associated Tooling to Suit. Probe, Machine Light & Signal Tower. New Battery Fitted 2025. Kraft Bauer Fire Extinguishing System. Elbaron Ronia 100 DV Electrostatic Air Cleaner/Mist Collector. Cosmotec EVE10082207000 7035 Air Conditioner (2013). Power Supply 415 Volt, 3 Phase. Full Catalogues & Manuals Available. Weight of Machine Approx 8,100kg. Dimensions of Machine Approx 1,700mm x 2,270mm x 2,215mm. Note: Client will arrange for the machine to be disconnected and drain the oil (if required) and move to the Exit for collection. During viewing, Client is willing to demonstrate the machine capabilities.

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm Kodpfx Aju Ng Nponwjnc dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: RX7_800074, total height: 1,905 mm, total length: 2,010 mm, total width: 2,508 mm, workpiece weight (max.): 20 kg, spindle speed (max.): 10,000 rpm, grinding wheel diameter: 202 mm, overall weight: 4,500 kg, power: 19 kW (25.83 HP), 5-axis CNC tool grinding machine – completely overhauled (X, Y, and Z axes, CNC). High-performance production machine with a polymer concrete bed (ANCAcrete), 19kW, 10,000/min spindle, and a dual disc changer for up to eight grinding wheels. PLX tool loader with 2 pallets, latest CNC generation, and the latest ToolRoom RN35 software installed. Optionally available with an extraction system and coolant system. Kedpfx Asw Uf Sgsnwonc !Offer only valid in Europe, Africa, and the Middle East!

Condition: good (used), Storage location: 3143 Manufacturer: Jakob Schmid Oberkochen Year of manufacture: 1993 Type: RS 1000 Knsdpjz E U Arsfx Anwec Machine number: 1093 1165 Longitudinal travel of the worktable: 200 mm Transverse travel of the worktable: 180 mm Swivel range of the motor: 350° Vertical adjustment: 350 mm Grinding wheel arbor with centering cone: 10 / 20 mm Grinding wheel speed: 6,000 rpm Arbor with dividing head: SK 30 Swivel range of the dividing head: 360° Grinding wheel diameter: 80 mm Connection power: 0.2 kW Condition: good Accessories/equipment: 6-jaw chuck, Additional attachment, MK5 arbor Dimensions with table: 600 x 800 x 1,500 mm Weight of the machine with table: 150 kg

Condition: ready for operation (used), functionality: fully functional, total height: 1,840 mm, total length: 1,700 mm, total width: 1,750 mm, type of input current: three-phase, overall weight: 1,850 kg, travel distance X-axis: 490 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 115 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, spindle nose: HSK 63, Tool grinding machine EWAG RS15 TECHNICAL CHARACTERISTICS: Stroke X axis: 490 [mm] Stroke Y axis: 130 [mm] Stroke Z axis: 115 [mm] Grinding spindle motor power: 2.2 [kW] B axis swivelling stroke: 260 [°] Workpiece spindle nose: HSK 63 Variable power feeding: Yes Digital read out: RSF-Elektronik Number of axes Digital Read Out: 3 Lubrication tank capacity: 100 [l] Centralized lubrication: Oui Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] INCLUDED EQUIPMENT: x1 EWAG dividing head (HSK63 tapper) Knodjzz Rtuspfx Anwjc x1 cross table x1 FR15 adjustable-speed grinding spindle drive x1 OR15 adjustable X-axis oscillator (oscillation frequency: 0–68 min⁻¹) x1 mounting unit for PRO15M metric projector (measuring travel: 150 mm) x1 MARCEL AUBERT Ø150 mm profile projector Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: good (used), Universal tool grinding machine Stock number: 3136 Manufacturer: WMW (Gotha) Year of manufacture: 1976 Type: SWU 250-I Machine number: 201/76 Working area Maximum workpiece length: 600 mm Maximum workpiece diameter: 250 mm Maximum disc cutter diameter: 360 mm Maximum grinding length: 450 mm Table Table travel, longitudinal, manual: 500 mm Table travel, longitudinal, automatic: - Table swivel: 0-90° Working surface: 120 x 950 mm Taper in the universal chuck: MK 5 Taper in the tailstock: MK 2 Grinding spindle Grinding spindle head height adjustment: 250 mm Cross travel: 230 mm Rotatable: 350° Tiltable: 15° Maximum disc diameter: 160 mm Grinding spindle speeds: 2200/3500/5200 rpm Power consumption: 1.8 kW Ksdpjzx D U Tefx Anwonc Condition: good Accessories/Equipment: extensive accessories – see pictures Dimensions and weights Space requirement: 1,300 x 2,000 mm Machine weight: 0.9 t

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Available from Q1/2027, or upon agreement. Equipment can be further adjusted to meet specific needs. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Work area: Kedpez Dilfefx Anwonc X-axis 700 mm Y-axis 410 mm Z-axis 500 mm C-axis rotation angle 320° X3 auxiliary axis: Optional Work area 600 mm Grinding spindle: Interface HSK 80 E Power 100% 28.8 kW Speed Standard 12,000 rpm Measuring system and feed: Resolution linear axes 0.0001 mm Rapid traverse linear axes 30,000 mm/min Resolution rotary axes 0.001° Speed C-axis 150 rpm Rotary axis: (A-axis SK50) Center height Standard 175 mm Speed as a spindle 1,000 rpm Optional 2,600 rpm Control system: Siemens 840 DSL Tool changer: Double wheel Coolant system: Available upon request Extraction system: LTA Extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices from the extensive A. Haas clamping device catalog are possible. Individual, customer-specific training. Includes pre-acceptance at the manufacturer's plant, IBN (Initial Batch Numbering), training, and final acceptance at the customer's site. Financing also available upon request.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Knjdewrnf Ejpfx Anwsc Technical Data: >> Year of manufacture: 2002 >> Serial No.: 2197 Clamping range: >> Clamping surface of tool slide 500 x 180 mm >> Max. tool diameter between centers 130 mm >> Max. tool length between centers 270 mm >> T-slots machine stand 12 mm Movement range: >> Working travel Grinding stroke 190 mm Grinding stroke during thread grinding 190 mm Transversal adjustment tool slide 100 mm Vertical adjustment grinding head 325 mm Longitudinal adjustment grinding spindle 5 mm >> Coarse adjustment travel Tool holder 220 mm Grinding head carrier 800 mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool holder 360 degrees Grinding spindle: Three-phase drive motor 1.1 KW at 2800 rpm Spindle speeds, stepless 2000 to 12000 rpm Max. grinding wheel diameter 125 mm Max. cutting wheel diameter 200 mm Dimensions: Weight 520 kg Dimensions (D x W x H) 800 x 1100 x 1760 mm Space requirement (including operation) 2.5 x 2.3 m Accessories and equipment: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly fast, economically, and flexibly, with the highest operating comfort. The Deckel S11speed is in very good condition. Mechanically and electrically tested. Take the opportunity to visit and test this machine on site under power.

Condition: excellent (used), Amada Togu Surface Grinder Tool diameter (min.) Ø 2 Tool diameter (max.) Ø 160 Vertical traverse (mm) 200 Grinding speed: Stations A / B / C (mm/min) 0.06 Kedpfsz R A T Dex Anwsnc Stations D / E (mm/min) 0.03 Dimensions: Length (mm) 750 Width (mm) 800 Height (mm) 1920 Weight (kg) 470

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Kodpsxz R T Ujfx Anwonc Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

Condition: excellent (used), Year of construction: 1992, Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Knsdsm E T Anjpfx Anwec Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: repair required (used), Year of construction: 1989, functionality: not functional, Michael Deckel S 12 M tool grinding machine. The machine has an electrical problem, error on the display. Otherwise in good condition. Accessories: grinding wheel holders, operating manuals. Knjdpfx Anex Nclujwoc

Condition: like new (used), Year of construction: 2020, operating hours: 4,000 h, The machine is as good as new. It is equipped with an ELBARON sanding mist extraction system. The machine can also be supplied without this device on request. The package includes collets for all standard diameters up to 20 mm. Complete description and installation manual. An original spare spindle is available on request. So there is no waiting time for spindle maintenance. Kedst Dyknjpfx Anwenc English: The machine is in mint condition. It is equipped with an ELBARON grinding mist extraction system. On request, the machine can also be delivered without this device. The package includes collets for all common diameters up to 20 mm. Full description and installation manual. An original spare spindle is available on request. So there are no waiting times for spindle maintenance.

Condition: excellent (used), Year of construction: 2014, operating hours: 12,340 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 8,100 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 20 m/min, travel distance X-axis: 380 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 280 mm, grinding spindle motor power: 14,000 W, table length: 500 mm, table width: 330 mm, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Gemini DMR TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC 31i B5 Software installed: Quinto Qg1 Colour touchscreen: Yes Number of axes: 5 Stroke X axis: 380 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Y axis: 300 [mm] Max. Stroke speed Y axis: 5000 [mm/min] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 280 [mm] Max. Stroke speed Z axis: 20000 [mm/min] Resolution Z axis: 0.0001 [mm] Table length: 500 [mm] Table width: 330 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10000 [rpm] Grinding spindle motor power: 14 [kW] Max. diameter grinding wheel: 250 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 12340 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 8100 [Kg] EQUIPMENT INCLUDED: x1 8-position grinding wheel changer x8 coolant supports x1 tool probe x1 FANUC LR Mate 200iC 5L 6-axis tool-loading robot x1 set of robot grippers x1 pallet for robotic tool loading/unloading x3 HEIDENHAIN linear scales on the X, Y and Z axes x1 electrical cabinet air-conditioning unit x1 spindle chiller Kedpez Hcg Ijfx Anwsnc x1 fire suppression system (to be inspected by the buyer through a qualified organization) x1 set of 4 lifting brackets x1 set of technical manuals x1 parameter backup on USB flash drive *The SCHUNK collet holder and the 2 grinding wheel holders shown in the photos are not included Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening/grinding tools such as milling cutters, taps and drills. Machines similar to the following brands: Blohm, ELB, Ewag, Favretto, Fenix, GER, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer and Walter. Also consider cylindrical and surface grinding machines, lathes, machining centres and milling machines.

Condition: refurbished (used), Year of construction: 2010, operating hours: 34,850 h, functionality: fully functional, Available from Q1/2027; equipment can still be adjusted to meet specific requirements. Universal 5-axis retrofitting grinding machine, directly from the manufacturer. Also available with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear milling cutters, cutting rotors, form cutters, industrial knives, circular knives, hobbing wheels, skiving tools, and other workpieces and components. Working area: X-axis: 700 mm Y-axis: 410 mm Z-axis: 500 mm C-axis: Rotation angle 320° X3 auxiliary axis: Working area: 600 mm Grinding spindle: Interface: HSK 80 E Power: 100% 28.8 kW Speed: Standard 12,000 rpm Kedpfez Dhdysx Anwonc Measuring system and feed: Resolution, linear axes: 0.0001 mm Rapid traverse, linear axes: 30,000 mm/min Resolution, rotary axes: 0.001° Speed, C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as a spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840 DSL Tool changer: Dual-wheel Coolant system: Optional Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Additional accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, commissioning, and handover), training, and final acceptance at the customer's site. Financing options available upon request.

Condition: good (used), Year of construction: 2015, operating hours: 20 h, functionality: fully functional, Indexing hand device for grinding and milling machines as well as other applications. Robust cast body on swivel angle and base plate. Interchangeable T-slot nuts 10 mm. Comes with reduction sleeves MK6 - MK5 and MK6-SK50, index plate T24. Additional index plates with other divisions used, unit price € 60.00. Used clamping devices – please inquire. Knedpfx Aeyxyxkjnwec

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Knjdpfx Anotzxn Hjwoc Example photos sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available in Q1/2027. Used for re-sharpening involute milling cutters / beveloid gear milling cutters / cutting rotors / form cutters / industrial knives / circular knives / spur gears / skiving tools / deep-hole drills, and other workpieces / components. Control system: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing table): 360° SK50 C-axis (rotary table): 270° X3-axis: electrically driven, with tailstock Grinding spindle: HSK80 (conversion to HSK50 possible) Dressing unit Tool changer: 10-position magazine Coolant system: Turbo Separator Extraction system: LTA CO2 extinguishing system Additional accessories available from the factory Software can be supplied customized according to customer requirements Pre-acceptance at the factory, commissioning, training, and final acceptance at the customer's site Financing / lease purchase possible Modifications possible Kjdpfjx Tr H Njx Anwonc

Condition: good (used), Tool grinding machine Stock number: 3141 Manufacturer: Walter Year of manufacture: 1984 Machine number: 025 Knodpfjzy Iyvox Anwsc Type / Model: Helitronic 30 NC Control system: Grinding wheel diameter: 75 to 125 mm Maximum grinding wheel diameter: 200 mm Grinding wheel arbor: 20 mm Maximum workpiece diameter: 265 mm Maximum workpiece length between centers: 430 mm Maximum workpiece length between spindle nose and tailstock: 535 mm Work table: 890 x 130 mm Swivel range: 135° Speed: 1,400 / 2,500 / 2,800 / 5,000 rpm Spindle power: 1.4 kW Longitudinal travel (x-axis): 360 mm Grinding head, vertical axis swivel range: 360° Horizontal axis swivel range: 220° Vertical adjustment: 230 mm Cross travel (z-axis): 180 mm Workpiece carrier (a-axis) Arbor: ISO 50 Maximum number of teeth: 999 Smallest pitch: 1 mm Center height: 135 mm Swivel range around the vertical axis: 360° Swivel range around the horizontal axis: +90° / -25° Equipment: Condition: good Total connection power: 7 kW Weight: 0.5 t Machine dimensions: 1,000 x 1,000 x 1,600 mm Control cabinet dimensions: 550 x 450 x 1,700 mm

Condition: used, Year of construction: 1998, Walter Heli-Power Production 5-Axis CNC Tool Grinder. Serial No. 6802 (1998). Country of Origin: Germany Knodsz Ar Ebjpfx Anwoc Centralised Cutting Oil Tank and Eclipse Automag Oil Filtration/Separation System (2016) Please note: This item will be awarded to the highest bid from Lot 1, Lot 1A or Lot 2 Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: used, functionality: fully functional, EYAN Universal Tool Grinding Machine – Used, including extensive accessories & documentation For sale is a high-quality universal tool grinding machine from the EYAN brand, in good used condition. The machine is ideally suited for the precise re-grinding and production of various cutting tools and is perfect for professional toolmaking as well as for locksmiths, maintenance companies, and training workshops. Thanks to its robust cast iron construction, the machine impresses with its smooth operation, stability, and precise grinding results. Equipment EYAN Universal Tool Grinding Machine Precision chuck / tool holder Extensive adjustment and setting options Machine lamp Grinding wheel mounted Original under-cabinet with storage space Original operating manual Technical documentation Spare parts lists and documents Additional accessories and tools in the under-cabinet (see pictures) 400 V high-voltage connection Condition The machine is in good, used condition with the usual signs of wear and tear. It comes from an operating business and was in use until recently. Scope of delivery EYAN Universal Tool Grinding Machine Under-cabinet Chuck Grinding wheel Original operating manual Technical documentation Spare parts documents Accessories and tools as shown in the photos Application areas Tool and mold making Metalworking Locksmith shops CNC manufacturing Training companies Maintenance and repair Tool grinding machine, universal tool grinding machine, tool grinder, milling cutter grinding machine, drill bit grinding machine, milling cutter grinding, twist drill grinding, turning tool grinding, tool sharpening machine, precision grinding machine, toolmaking, metalworking, grinding machine, EYAN, universal grinder, tool grinder, cutter grinder, tool grinding, tool sharpening, 400V, industrial, workshop machine, mechanical engineering, grinding technology. Knsdezhx D Ijpfx Anwjc An inspection and functional test are possible at any time by prior arrangement. Net price, plus 19% VAT.

Condition: excellent (used), functionality: fully functional, Reinecker WZS60 Year of manufacture: 2007 Ksdpfxszwplbs Anwonc Glass changing machine Part loader

Condition: used, functionality: fully functional, Walter HMC 500 WWM 5-axis tool grinding machine Knedpfx Asz E N Upjnwsc A-axis: 750 mm X-axis: 290 mm Y-axis: 320 mm Z-axis: 660 mm Tool diameter: 200 mm The machine is equipped with linear scales on 3 axes.