Used Tool grinders for sale (196)

Condition: used, Twist drill grinding machine, twist drill grinding machine NSC SCHLUMBERGER Manufacturer: NSC SCHLUMBERGER (France) Type AF1 No. 1049 Year of manufacture 1974 Grinding range Ø 10-80 mm Tool length max. 720 mm Point angle 80-160 º Tool speed with 2 cutting edges 40 rpm Tool speed with 3 cutting edges 26 rpm Tool speed with 4 cutting edges 20 rpm Feed rate 0.01- 0.1 mm/rev. 10 steps Grinding wheel diameter max. 230 mm Grinding wheel speed 2650 rpm. Dueb Ezwodzp T Us Dcot Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Precision six-jaw chuck REISHAUER Ø 240 mm, 6-80 mm clamping range - Dressing device with dressing diamond for dressing the grinding wheel - For grinding standard drills and other tools with 2, 3 or 4 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - for left- and right-cutting drilling tools, with gear changeover - relief grinding, clearance angle variably adjustable - Coolant device in the machine base frame Space requirement L x W x H 1400 x 800 x 1450 mm Weight approx. 800 kg good condition

Condition: used, Year of construction: 1987, max. grinding diameter ? mm grinding length ? mm workpiece length ? mm total power requirement 0,6 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1 x 1 x 1,5 m No. 0691 Tool and steel grinding machine SIMON L15 Djb Ezstqpy Ejw Dcout Drive: 0.55 kW Speed: 1400 / 2800 rpm Lapping station with oscillating table, swiveling. Opposite side station for tool grinding. Suction unit

Year of construction: 1992, Condition: excellent (used), Universal tool grinder Michael Deckel S11 very good condition !!! Technical data: >> Year of manufacture 1992 >> serial no. 1651 Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. tool diameter between centers 130mm >> Max. Max. tool diameter with flying clamping in universal dividing head 620mm >> Max. Tool length between centers 270mm Duebem E T Anj Ezw Dcjt >> T-slots machine stand 12mm >> T-slots grinding head, tool slide and accessories 8mm Range of motion: >> Working paths grinding stroke 190mm grinding stroke during swirl grinding 190mm cross adjustment tool slide 100mm vertical adjustment grinding head 325mm longitudinal adjustment grinding spindle 5mm >> Coarse adjustment travel tool carrier 220mm Grinding head carrier 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head carrier 360 degrees Grinding head 360 degrees Tool carrier 360 degrees grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speed, stepless 2000 to 10000 rpm Max. Grinding wheel diameter 125mm Max. Cutting disc diameter 200mm Djduu2 Dimensions: Weight 520 Kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2,5 x 2,3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding device SK40 >> Handwheel device for tool slide >> Suction device >> Machine lamp To the machine : Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches are ground amazingly fast, economical and flexible and with the highest ease of use. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine on site under power.

Condition: good (used), Year of construction: 1992, Schütte WU 405, CNC(NUM) controled tool grinding machine with five axles. Fully functioning and partly revised. Serveral working grinding programms. Electrostatic filter is included. X-axle 540 mm Y-axle 280 mm Z-axle 260 mm W-axle 355° pivotable A-axle Engine capacity 4.6 Kw The Machine is not used for over three years after a fire, the damage is fully repaired and the machine is completely functional. It is possible to see it working under airpressure and electricity. Availabel programs on the machine: Ballnose cutters Conical cutters Cylindrical cutters Shell end mill Drills (10 different type of noses) Dsbefxz A Ao Ezw Dceut Tap Step tools

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg Duob Ezwjt Hw Nmj Dcot dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: new, Year of construction: 2025, Sharpening woodworking tools The PROFI chisel (lancing bag) and planing knife grinding machine! No cheap ASIA copy! The original! WOOD-TOOL-GRINDER WTG-1 - «Swiss Currently the absolute cheapest PROFI wood tool grinder on the market! For a precise and efficient work, a perfectly ground, razor-sharp cutting edge is a must. With our grinder sharpen your tools like: «Chisels, plow blades, chisels, chisels» fast, simple, accurate and inexpensive ... Made in Switzerland = Swiss Quality Where is the WOOD-TOOL-GRINDER «WTG-1» used? - Where conventionally wood is processed. - For example, in carpentry, carpentry, - carpentry, schools, trade schools, - Training centers / training workshops ... Your advantages - Very precise, stable and stable construction - Fast, in just 30 seconds you grind a perfect flashless edge - Extremely easy to use, also for apprentices and unskilled workers - Dry grinding principle, i. no problems with moisture (water / oil) - Stepless cutting angle adjustment - You buy fewer new tools, thus lower maintenance and fixed costs Dujb Ezw Djdt Ap Aecjt Construction of the wooden tool grinding machine «WTG-1» The WTG is powered by a powerful 500 watt motor. The carriage used is a dust-proof, high-precision, ball-bearing profiled rail guide, which is used a thousand times in machine tools, industrial robots and precision special purpose machines. Stepless grinding is achieved by means of an accurate and self-locking dovetail. The tool clamping is safe and stable via a parallel clamping system. Technical specifications Weight: 20 kg Connection: 230 volts Motor: 500 watts Speed: 3000 rpm Grindable tool width: 5 - 60 mm Cutting angle adjustment: 25 - 30 ° degrees stepless Main grinding wheel: special corundum Ø 100 mm Polishing wheel / buffing wheel: special type ROTAX Ø 150 mm I would recommend you the basic machine and the grinding double set. So you are well prepared. Your direct contact person: Sir Marc Brönnimann Head of Sales & Assembly BST Kaindl, DAREX, HARICH, Vertex, Drill Doctor, METEOR, Optima, Tatar, Promac, Cuoghi, Avyac, Christen, MOTOM, VITAX, WASU, Ulrich Klingel, ISELI, Schneeberger, Lamallo,

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable Duebedzp Tbo Ezw Dcot - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm weight approx. 1150 kg

Condition: used, max. grinding diameter 152 mm grinding length 305 mm workpiece length ? mm total power requirement 380 W weight of the machine ca. 150 kg dimensions of the machine ca. 1 x 0,6 x 1.4 m No. 0439 Dusbjtr U Sxs Ezw Dcst Tool sharpening machine CLARKSON Mark-I Working area: diameter 152 x 305 Drive: .38 kW

Condition: good (used), Year of construction: 2003, Fully working machine and still we using this machine in production, few week ago was change main head bearing which cost 4.5k eur Dob Eovw Nq Uozw Dceut

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, spindle speed (max.): 3,000 rpm, travel distance X-axis: 25 mm, travel distance Y-axis: 286 mm, travel distance Z-axis: 35 mm, table width: 200 mm, product height (max.): 100 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (option W20) Number of discs: 1 Table diameter: 200 mm Workpiece height: 100 mm Control: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of the 4 axes, cylindrical interpolation of the 2 robot axes Head motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Completion Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable Dujb Ezwovr Dtge Dcst MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirement (L x W x H): approx. 1.83 x 2.04 x 2.1 m MACHINE DETAILS - Loading and unloading robot - Fire protection device

Condition: used, Year of construction: 1982, x-travel 0 mm y-travel 0 mm table length 600 mm Deb Ezwet Hwr Ue Dcjut table width 400 mm total power requirement 2 kW weight of the machine ca. 1500 kg

Condition: good (used), Filter system for cleaning grinding oil in carbide processing. Dobeqbup To Ezw Dcjut The system was in operation until recently.

Condition: used, Graver grinder PARPAS type AU make no. 854/36 year of construction 1971 grinding wheel diameter 100 mm grinding spindle speed approx. 3500 rpm. motor power approx. 0,55 kW Mains connection 380 Volt, 50 Hz - collet chuck (system DECKEL with S20x2) - collet chuck Ø 15,0 mm - Diamond grinding wheel dresser for grinding wheel end face Duobsdzp T To Ezw Dcjt Space requirement L x W x H 700 x 350 x 450 mm weight approx. 80 kg good condition

Condition: used, Year of construction: 1987, max. grinding diameter - mm grinding length - mm workpiece length - mm Duebstqqa Nj Ezw Dcjt total power requirement 0,75 / 1,2 kW weight of the machine ca. 0,250 t dimensions of the machine ca. 1*1*1,2 m No. 5375: Universal tool grinding machine, SIMON, type L 15 with 1400 / 2800 min-1 Dimensions 1300 x 1000 x 1500 mm Drive power: ,75/1,25 kW

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 205-045-090, total height: 2,200 mm, total length: 1,850 mm, total width: 2,870 mm, spindle speed (max.): 1,500 rpm, grinding wheel diameter: 100 mm, overall weight: 3,800 kg, grinding length: 100 mm, grinding spindle speed: 12,000 rpm, pivoting range: 240 °, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, year of last overhaul: 2025, warranty duration: 6 months, TTB Engineering, a Swiss company and a leader in the production of high-precision tool grinding machines, offers a fully refurbished machine for sale. Originally manufactured and sold in 2007 to a customer in the European Community, its sole owner, the machine was returned in late 2024 in excellent working condition. It is equipped with an automatic loader and an integrated fire suppression system. Djb Ezsvt Tniow Dcout In January 2025, TTB Engineering carried out a complete overhaul, performing all necessary replacements and maintenance to ensure its reliability. The machine is offered with a 6-month warranty and includes the NUMroto license along with the corresponding software packages. For more technical details, please refer to the attached brochure.

Year of construction: 1979, Condition: ready for operation (used), Max. grinding diameter: 300mm, Max. grinding length: 1950mm, Max. workpiece length: 2000mm Max Feed rate 1 – 30 m/min. Coolant supply 100 l/min Inf. variable speed range 2.000 – 6.000 RPM. Spindle 88 mm Centers height 150 mm Grinding wheels 100 – 250 mm Spindle power 3,5 kW Grinder Power 15 kW – 380 V – 50 Hz Dujb Ejhq Uigezw Dcst

Condition: used, Year of construction: 1992, max. grinding diameter 0 mm grinding length 0 mm workpiece length 970 mm total power requirement 12 kW Dujbet Hwpaj Ezw Dcot weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: good (used), Year of construction: 1984, Functionality: fully functional, machine/vehicle number: 1289 397, spindle speed (max.): 8,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 50 mm, swivel angle A-axis (min.): -10 °, swivel angle A-axis (max.): 27 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Motor power: 2.2 kW Spindle speeds: 1,000 - 8,000 rpm Spindle inclination (A-axis): -10° to +27° Setting accuracy: 1 min Height adjustment (Y-axis): 130 mm Stroke range (X-axis): 220 mm Oscillation stroke: continuously adjustable during oscillation, 0-30 mm Oscillation frequency: 30/60 1/min Workpiece headstock Radius adjustment (Z-axis): 0.01 - 50 mm Setting accuracy: 0.01 mm Retraction of the slide (grinding in measuring position): max. 49 mm Cross table clamping surface: 155 x 205 mm Travel paths (X-Y): 60 mm each Maximum swivel angle (B-axis): 260° MACHINE DETAILS Connection voltage: 380 V Weight: 1,200 kg EQUIPMENT Dsbevw Tv Ij Ezw Dcjut - Variable grinding pressure - Projector fixed in measuring position - 1 cabinet with accessories - Various grinding wheels and flanges - Coolant tank - Documentation

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition Dujbonzt A Ho Ezw Dcst

Condition: used, Year of construction: 2006, SAACKE gas burner GLS 80 year 2006 6000 KW Further details and scope of delivery see photo. Technical data see type plate. Item condition: used, untested condition: used, untested Without OVP Without original packaging Example photos Deb Ezwotzxn Hj Dcjut sample pictures A viewing in Wettringen is possible! For further questions you can contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material defects and defects of title! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: used, Year of construction: 1985, machine/vehicle number: 113785, 4 - station tool grinding machine pre-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm re-grinding - disc 200 x 50 x 51 mm - table size 400 x 200 mm lap grinding - disc / diamant 125 - 12.5 x 51 mm - table size 400 x 200 mm chip groove - disc - 150 x 8 x 51 mm coolant device  Duob Ezeg H Ng Dow Dcot workplace lamp motor speed 1,400 x / 2,800 rpm electrical data 380 V / 0.37 / 0.6 KW space requirements width - 1,100 x depth - 1,000 x height - 1,400 mm weight approx. 340 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 1,169 h, Functionality: fully functional, Ladies and Gentlemen, We offer you a very well equipped Schütte grinding machine. Djb Ezw Dova Dumocsut Please refer to the technical data sheet for a technical description.

Condition: new, Year of construction: 2025, Tool Sharpener - Grinding Machine For sharpening various tools, such as drills, milling cutters, lathe tools, blades, discs, and many others. The base is equipped as standard with a very convenient tool shelf. The stable construction ensures comfortable and precise work without vibrations. Ergonomically placed switching and control elements. It has a sharpening and grinding device that works in three planes, as well as a large number of additional tools that facilitate work with the machine. Machine Features: Universal tool grinder for sharpening drills, milling cutters, and lathe tools. Very durable structure that absorbs vibrations and ensures the best grinding results. Lower part of the machine with a tool cabinet included as standard equipment. Large handwheels for easy and precise setting and adjustment. Grinding head can be rotated vertically from +40° to -40° and horizontally from +50° to -50°. Drive unit with a 3-jaw chuck (DM 80mm) included as standard, allowing for grinding of cylindrical surfaces. Max grinding diameter: 125mm, max grinding length: 320mm. Capability to sharpen spiral drills from 5-32mm. Technical Data: Max. diameter of processed element: 175 mm Distance between centers: 320 mm Table size: 535 mm x 130 mm Longitudinal table movement: 320 mm Cross table movement: 170 mm Vertical grinding head tilt: -40° to +40° Horizontal grinding head tilt: -50° to +50° Grinding head rotation speed: 2800 rpm Actual motor power: 0.18 kW Weight: 266 kg Djb Ezw Devugynjcout Note: The price quoted is the net price. It does not include transportation costs.

Condition: used, Functionality: limited functionality, machine/vehicle number: 2194, EWAG WS11 This machine was last used around 10 years ago. Due to long periods of non-use, it now needs to be overhauled. Ideal for refurbishing. With extensive accessories: - Basic machine with cooled spindle and dust extraction - Swivel device for microscopes - Machine light - ISOMA microscope for side viewing - ISOMA microscope for front viewing - Radius grinding device with various accessories - Universal vice on collet body (no photo, as it is currently loaned out...) - 19 grinding wheel holders, some with grinding wheels - 29 SCHAUBLIN UP collets Ø 1.0 ... 20.0, some every 0.50 mm - Additional spindle holder for higher mounting of the spindle - Various accessories (dial gauge, additional pulley, etc.) Duobovmt Uij Ezw Dcjt The machine can be inspected at any time in D-78194 Immendingen.

Condition: good (used), Year of construction: 1996, Schütte WU 405 tool grinding machine, year of construction 1996, annual maintenance carried out, NUM control, travel X/Y/Z 540/280/260 mm, travel W/A axis 360°, C grinding head 330°, 2 spindle ends, Spindle speed up to 12,000 rpm, automatic measuring probe, extraction system, CO 2 extinguishing system, belt filter system, Grinding wheel holders, Djb Ezeuachgow Dcjut clamping fixtures,