Year of construction: 2009, Condition: good (used), Functionality: fully functional, machine/vehicle number: 101173, NFE/ FE separation system Fjlqsry Ugvov Edcogb

Condition: used, Year of construction: 2021, operating hours: 219 h, machine/vehicle number: 30, - Feed hopper 2.9 m³ - upper screen deck 2.77 x 1.22 m - lower screening deck 2.68 x 1.22 m - total screening area 6.7 m² - Width of main discharge belt 1,000 mm - Discharge height 3,030 mm - Width of side belts (fine and medium fraction) 650 mm - Discharge height approx. 3,640 mm - Width of base plates 400 mm Transport dimensions: 9.20 x 2.50 x 3.10 m Weight: approx. 16,700 kg This offer is non-binding, no guarantee for equipment details. Subject to errors, changes and prior sale! Ref.: 30 _____ - hopper 2.9 m³ - top deck 2.77 x 1.22 m - bottom deck 2.68 x 1.22 m - complete screening area 6.7 m² Fgolqv Eeqx Tgtsdceb - width main conveyor 1,000 mm - stockpile height 3,030 mm - width side conveyor (fine and midfraction) 650 mm - stockpile height approx. 3,640 mm - track pads 400 mm width Transport dimensions: 9.20 x 2.50 x 3.10 m Weight: approx. 16,700 kg This offer is non-binding. No responsibility for equipment details, errors excepted. Subject to prior sale. Ref.: 30

Condition: good (used), Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine, test screening machine -Manufacturer: Siebtechnik, test sieving machine LAVIB -Type: LAVIB 86 Fslqvjvmnhwj Edcegb -Dimensions: 490/470/H600 mm -Weight: 66 kg

Condition: as good as new (ex-display), “Bakker Madava 500 x 320” for Sale Manufacturer: Bakker Madava Permanent magnetic roll L x Dia.: 500 x 320mm AA.: 2.500mm. Fgslqovxhzzjv Edceb Belt Widthness: 400mm. With Control panel to adjust belt-speed.

Year of construction: 2024, Condition: as good as new (ex-display), MAGNETIC PULLEY FOR SORTING FERROUS MATERIALS. MAGNETIC LENGTH: 1,000 mm DIAMETER: 400 mm GEAR MOTOR: 3 KW NEW EQUIPMENT NEVER USED. 2 PULLEYS AVAILABLE Fgjlqsvyt T Esv Edcob AVAILABLE IMMEDIATELY UNLESS SALE IN THE MEANTIME

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction – sorting cabin Broeckx Plastic Recycling B.V. Folqv Eovbh Eljdcjgb This sorting cabin was put into use in 2002 for the manual sorting of industrial plastic waste. - Closed sorting cabin - Feed belt (slowed) - Sorting belt (4 speeds) - Waste discharge belt - 7 sorting bunkers 32.5 m3 - 1 dump bunker - 12 sorting places

Year of construction: 2025, Condition: new, Special drums, segmented drums (covered drums) suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T5-T7, Komptech Maxx, Mustang, Nemus, Cribus Pronar 18.47, 20.55, and others - Manufactured according to your specifications: - Segments with perforations from 2 mm possible - Easy changing of screen segments - Various segments possible within one drum - Smallest bars - Hardox segments - Welded helix - Available in various wire gauges - Short delivery times Fgelov Nvizoqv Edceb Many screening drums in stock

Year of construction: 2025, Condition: new, -Drum diameter 1600mm -Drum length 2880-3880-4880mm -Working length 2000-3000-4000mm -Productivity 20/30 tons/hour -Grid holes as per your specifications -The screen is made of a closed profile -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working part -Flat bar blades installed in the center of the drum allow the material to be poured -Drum rotation speed approx. 11.5 rpm Fgslqv Eod Nq Uuodcsb - Sieve feed sieve via gearmotor- Drum transmission via gearmotor + 2 rubber drive wheels diameter 230 mm - Sieve equipped with electrical panel - Feed hopper with belt advancement adjustment via variator, 1500 mm wide basket, 3500 mm long, 1200 mm high, basket conveyor, 3500 mm long, 650 mm wide belt, rubber chevron type - 12 months warranty - Made in Europe - CE compliant

Year of construction: 2022, operating hours: 660 h, Condition: as good as new (ex-display), Functionality: fully functional, Demo machine - very few operating hours! TECHNICAL DETAILS Feed hopper volume: > 6 m³ Diesel engine Model: CAT C 3.6 Power: 75 kW / 100 HP Emission standard: EU Stage V / EPA Tier 4f Displacement / cylinders: 3.6 l / 4 Fgelqv Edjv I U U Tjcjb Screening drum Drum length: 5,500 mm Drum diameter: 2,200 mm Effective screening area: 33 m² Screening capacity: max. 200 m³/h Perforation size: 10 - 40 mm Material thickness: 6 or 8 mm Fine grain conveyor Length: 8,060 mm Width: 1,000 mm Maximum discharge height: 3,700 mm Coarse grain conveyor Length: 5,900 mm Width: 1,200 mm Maximum Discharge height: 3,800 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 8,000 h, Functionality: fully functional, overall weight: 22,000 kg, Double shaft fine shredder M&J Etafineshred 6500 from Metso. The 2x200 kw Eta®FineShred unitscan be used in a wide range of different applications including difficult materials such as sticky bitumen, fabrics and foams. Particle sizes of 8-100 mm are obtainable depending on the screen size applied Fslsv Rgdloqv Edcjgb the screen size applied.

Year of construction: 1978, Condition: used, Functionality: unexamined, machine/vehicle number: 602739, For sale is an ALPINE HS50 single-screw extruder (built in 1978) and a Gamma Meccanica CENT 280 underwater pelletizer from 1995. Both untested and stored. Functional testing is not possible. See pictures for condition. Fslqv Edjv Rnf Djcjgb

Condition: refurbished (used), Year of construction: 2010, operating hours: 26,174 h, machine/vehicle number: 01527 Veolia Gent, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. Technical data baler Typ HBC 120 K Year of construction 2011 Press power main press 120 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Bale size 1,100 x 720 mm Driving motor 90 kW Double channel pressure cilinder for increased bale weights Baler will be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This inclused 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: Folqv Edjq D Az Recjgb All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: refurbished (used), Year of construction: 2005, operating hours: 6,149 h, Doppstadt DW 2560 Buffalo - Year of construction 2005 Fgolqv Esv Nvhwjdcob - Operating hours 6149 - Engine Mercedes Benz 354PS - Roller : 17 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Machine is overhauled and immediately available

Year of construction: 2025, Condition: new, -Drum diameter 1600mm -Drum length 2880-3880-4880mm -Working length 2000-3000-4000mm -Grid holes according to your specifications -The screen consists of a closed profile -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working part -Flat bar blades installed in the center of the drum allow the material to be poured -Drum rotation speed approx. 11.5 rpm - Sieve feed sieve via gearmotor- Drum transmission via gearmotor + 2 rubber drive wheels diameter 230 mm - Sieve equipped with electrical panel - Gravity feed hopper, dimensions Width 1600 mm, Length 1400 mm, Height 1200 mm - 12 months warranty Fjlqvjq T Sp Hs Edcogb - Made in Europe - CE compliant

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 87118109, overall weight: 2,700 kg, type of input current: AC, power: 0.004 kW (0.01 HP), Equipment: documentation/manual, Sorter in working order complete Fgolqv Eery Udasdcob length 2.77 m width 1.7 m height 0.9 m

Condition: good (used), Briquetting press for aluminum chips / grinding sludge Motor: 4 kW Briquette diameter: 60 mm High pressing pressure: 2,500 kg / cm² Fjlqet Ia Tkov Edcogb Throughput up to a maximum of 60 kg / h * Details after test

Year of construction: 2010, Condition: good (used), 2 SICON shredders Year 2010 Fgelqv Ejiz Tm Ijdceb The electrical cabinet is missing Price 15 000€ each 4 densimetric tables : 8 000€ each

Condition: reconditioned (used), Steinert Eddy Current Separator. Type : NE 100 230 E 5013 . Kom.No.: 11-0643 . Fabr.No.: 722165 . With new 1.000mm. wide belt and new Control-unit. Overhauled, Balanced, sandblasted and painted . Fgjlqv Ejri Tapedcsb

Year of construction: 2020, operating hours: 17 h, Condition: new, Functionality: fully functional, Waste washing with ampliroll system Price negotiable Fgelqvov Hpwye Edceb

Year of construction: 2025, Condition: new, -Professional vibrating screen -Sieve material into 2 or 3 fractions -Removable grids for quick replacement and/or cleaning -Under-screen vibrator -Equipped with a professional electro-vibrator, it allows continuous operation. - Perfect for screening mats. granular, pellets, seeds, legumes, flours, sawdust, soil etc. -Precise and fast screening -Very low maintenance costs -Vibrating grid dimensions 500mmx1000mm, grid holes according to your specifications * -Three-phase 380V or single-phase 220V operation on request - Wheels for movement, two fixed and two swivel with brake -Solid construction -Made in EU Fgjlqvsd Nrgqe Edcob

Condition: good (used), Year of construction: 2005, type of motor: electric motor, QZ Chain Shredder Fgslqv Estr A Nvjdcjb without control cabinet Hydraulics - no hydraulic pump and central lubrication equipment Cooling - cooled cylinder and lower shaft price negotiable

Condition: used, machine/vehicle number: 22031, Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 ASerial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Fgslqv Edjiiv S Sscsb Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Conveyor belt: 1.400 mm. AA. : 2.530 mm. Fgslqv Edjglvwgscsb

Year of construction: 2025, Condition: new, Functionality: fully functional, Features: -Screen drum length: 2000/3000 mm -Drum diameter: 900 mm -Sieving grids according to your specifications, square hole mesh or round hole perforated sheet metal -Fixed grids (welded), it is not possible to replace the grids Fgolqehrdmqsv Edcob -Electric motor power: 1.5/2 Kw -Self-cleaning grey side brushes (on request) -Possibility to add loading feeder -12 months warranty -Made in EU -CE compliant

Year of construction: 2025, Condition: new, - Sifts material into 2 or 3 fractions (one or two sieving grids) - Mesh with hole diameter according to your choice - Yield from 10 t/h to 15 t/h (depending on the material) - Possibility of loading hopper with capacity 2m³ dimensions 260 cm x 180 cm - Equipped with a professional electro-vibrator, allows continuous operation. - Precise and fast sieving - Adjustable vibration power by moving the rotating masses of the vibrator - Very low maintenance costs - inclination according to your needs - Grid dimensions 100cm x 200cm - Control unit - User manuals - CE conformity and marking - Three-phase operation 380V - Made in EU Fslqjfxa U Uev Edcogb