Used wood shredder for sale (342)

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Hodpfx Agex Anq Hozepa Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: excellent (used), Year of construction: 2012, operating hours: 1,259 h, functionality: fully functional, power: 36.41 kW (49.50 HP), overall weight: 2,000 kg, Schliesing 355 TX / Wood Chipper / Shredder / Mulcher / 21 cm Ø Hedpjxukccefx Agzepa • Manufacturer: Schliesing • Model: 355 TX • Year of manufacture: 2012 • Operating hours: 1,259 h • Power: 36.41 kW / 49.5 HP • Wood chipper • Shredder • Mulcher • Brushwood processor • Kubota 4-cylinder engine • Feed hopper: W: 1.34 meters x H: 1.06 meters • Infeed capacity: 21 cm Ø • Cutter disc: Ø 80 cm • Cutter disc: Nominal speed 1,140 rpm • Fuel tank: Approx. 50 liters • Technical inspection (TÜV): 08/2026 • Total weight: 2,000 kg • German machine • Immediately ready for use • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale based on our general terms and conditions.

Condition: excellent (used), functionality: fully functional, WOOD SHREDDER machine model MION e MOSOLE TR 2 second hand machine machine operation in automatic and/or manual mode working condition : Excellent In automatic mode, the motor starts in the opposite direction to free the pusher from any residues from previous work. after about 5 seconds ( in fully automatic mode ) the motor stops and restarts in the correct direction for continuous processing (see the video). technical details : hydraulic pusher lengthh rotor mm.700 rotor diameter mm.300 Hjdpfx Agew Hwpvezepa rotation speed of the rotor rpm 100 hopper content 3,42 m³ main motor power Hp 25 (kw 18) hydraulic power unit motor pusher Hp 1 interchangeable knives Feeding from top

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: Hpedjdwktkjpfx Agzea - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Hpodpexzpzdsfx Agzea

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Hpedpsxy Rrzjfx Agzja

Condition: good (used), Year of construction: 2005, functionality: fully functional, power: 18.5 kW (25.15 HP), Weima ECO 600 E Shredder Electric motor: 18.5 kW Hjdpfxjxf T Hre Agzjpa Drive power via V-belt and gearbox Feed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Screen hole size: 20 mm Cutting tools: 14 knives Extraction port diameter: 160 mm Weight: approx. 1,300 kg

Condition: excellent (used), Weima WL4 shredder, year: 2022, in excellent condition Hodpfx Agjxyxchezspa

Condition: refurbished (used), functionality: fully functional, The RS97 is one of the best wood chippers in the world. It has been fully refurbished and is equipped with a 160 kW engine. We can also supply a feeding conveyor for the material. All the technical data can be found in the attached data sheet. Hpodoxyqncspfx Agzsa

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Hpodpfx Aod E R D Ssgzea Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Hedpfx Aop H Sv Dogzspa 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: used, Year of construction: 2022, operating hours: 420 h, functionality: fully functional, MORBARK WH3000XP chipper from 2022 in good condition. Serial number 196 1040. Hpedpfx Aexyiunegzea

Condition: used, Wood shredder Weima Manufacturer: Weima Model: WL18/45 Country of manufacture: Germany Year of manufacture: 1997 Number of knives: 58 Rotor diameter: 368 mm Weight: 4000 kg Hpsdsxyx Nnspfx Agzsa Electric motor: 45 kW Included: Feed conveyors Vibrating conveyors Discharge belt conveyors

Condition: good (used), Year of construction: 2006, functionality: fully functional, Heinola chipper TT-75 RS year 2006 infeeding with vibra conveyor 6 m long 600 mm width + 1 year old magnetic. Hedpfx Aoxrcgzjgzopa

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, operation weight: 12,000 kg, Hello, I have for sale a Biber 80 plus Valtra S 280/4 chipper assembly, tractor production year 2003, good condition, Sisu engine, twintruck air conditioning, reverse drive, Biber 2007 editor, inlet 100/65cm, 8 knives, Kronos crane 8.3m weight 12 tons, machines in good condition, after inspection. I invite you. Hedpfx Asv Nxb Hjgzepa

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times Hedsd Hkqhepfx Agzopa - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: good (used), Year of construction: 1996, 4-shaft shredder from renowned manufacturer Untha, type RS 30 2 x 7.5 kW Hpsdoxpn Hnepfx Agzsa Function tested

Condition: like new (used), Year of construction: 2022, operating hours: 26 h, functionality: fully functional, MORBARK WH2400XP wood chipper from 2022 in good condition. Serial number 193-1036. Hsdpfxsxyit Rs Agzspa

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Hjdpfx Agev Tbqlszepa Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: used, Year of construction: 2016, Гидравлический кожух рубительной машины обеспечивает легкий доступ к ножу, в то время как 23 дюйма (58,42 см) Измельчение диаметра подходит для некоторых крупных деревьев. Благодаря измельчительному диску 75 дюймов (190,5 см) модель 23 способна измельчать большие объемы древесины Hpsdpfx Agjwlf Idozea Длина 27 футов 4 дюйма 8,33 см Высота 13 футов 6 дюймов 4,11 см Ширина 10 футов 10 дюймов 3,3 м Полная масса 45 000 фунтов 20 412 кг Тандемная масса 40 000 фунтов подвеска (18143,7 кг) Двигатель CAT

Condition: ready for operation (used), Year of construction: 2017, Brand: Votecs Model: EZ6-1 Hsdoxvc N Rjpfx Agzspa Machine no.: 03/17/47 Year of manufacture: 2017 18.5 kW

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Hpsdpfexwyx Sox Agzoa Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Motor power: 18.5 kW Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: good (used), Year of construction: 2006, Chipper with rotor width 800 mm Rotor diameter 368 mm with 40 knives Motor 22 kW Hedpfxjxyud Ij Agzspa Only 850 operating hours

Condition: ready for operation (used), Year of construction: 2004, Brand: Reinbold Hpodpfxoxvc I To Agzoa Model: AZR600 Year of manufacture: 2004 18.5 kW New knives, new sieve

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Hedpfoxwwvuox Agzspa Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago