Sliding table saw

Altendorf F45

Condition: good (used), Year of construction: 1987, functionality: fully functional, 45° tiltable, hydraulic lifting, lowering and swiveling, 1000 mm to the right of the blade, scoring unit, cutting length 3200 mm, upper extraction, 5.5 kW Price ex location Transport possible at extra cost! Pgodpjyaq Nbefx Ab Uei

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: Pedpfx Asw I Uxcsb Uegi - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: ready for operation (used), Year of construction: 2014, Table saw manufactured in 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and a maximum saw blade diameter of 550 mm. The machine includes a swivel-mounted control panel at eye level and a rip fence for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Altendorf F45 table saw we have for sale. Contact us for more information. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Max saw blade diameter: 550 mm • Main motor power: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz Pgsdjywk H Aepfx Ab Uoi • Current: 11.5 A • Phases: 3 • Control panel: swivel mounted at eye level • Scoring unit preparation: yes • Rip fence: included Additional equipment • AKE clamping system • Table extension: 840 mm • Angle mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Condition: used, Year of construction: 2008, functionality: fully functional, Main motor 5.5 kW Parallel fence Cutting length 3,500 mm Table length 2,200 mm Cutting width 1,000 mm Scoring saw 0.75 kW Swivel range +/-: -0.5 - 47° Maximum saw blade diameter 500 mm Speed 2,000 to 6,000 rpm Cutting length 5,000 mm Riving knife groove width 13 mm Voltage 400 V Current 35 A Frequency 50 Hz Main motor: ATB type YAF 112 M/21-11, output 5.5 kW Digital length stop Scoring unit Saw blade diameter 120 mm Tool holder diameter 22 mm Scoring motor: ATB type MAF 80/2 A-11, output 0.75 kW 1/min Podpfx Aoyxpy Reb Ujgi Includes vacuum table and 2 lasers Altendorf riving knife, 3 pieces Altendorf safety guard Leitz grooving cutter

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Podpfxsyg Epve Ab Uogi Blade diameter 550 mm Electronic head tilting Internal/external inclination from 22°30′ to 135 ° Measuring probe

Condition: used, Year of construction: 2002, Carriage length: 3000 mm Cutting width at rip fence: 1000 mm Cutting width at cross-cut fence: 3200 mm Pjdpfx Asyvz Rcob Uogi Cutting depth: 150 mm Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: max. 450 mm Speed: 4000 rpm Motor power: 5.5 kW Extraction connection: 120 mm and 80 mm Machine length: 3200 mm Machine width: 2000 mm Machine height: 1600 mm Weight: 1000 kg

Condition: good (used), Year of construction: 1986, used, good condition Manufacturer: Altendorf Model: F45 Year of manufacture: 1986 Machine no.: 86-4-143 GS-certified Motor 5.5 kW Carriage length approx. 2500 mm Cutting width approx. 800 mm Pgjdeyvv I Njpfx Ab Uoi Tiltable up to 45° Saw blade diameter: 450 mm Parallelogram guard Mitre fence Extraction connection D 80 and 120 mm Space requirement approx. 2500 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Location: ex stock 54634 Bitburg, free loaded, unpacked Handed over in the current as-inspected condition, without warranty or guarantee

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Complete production line for sale, based on a Di Più BRIK MB100 briquetting press (complete production line). Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. The machine is designed for high-capacity briquetting and is suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. It has been newly refurbished at the Di Più factory: all vital components have been replaced, including all cables, electrical wiring, and required electrical equipment. The machine is brought to as-new condition and comes with a 6-month Di Più factory warranty. The machine can produce briquettes with or without a hole, with a diameter of 90mm to 110mm, using soft or hard wood, in either round or square shapes. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compacting wood, sawdust, and other waste materials into wooden briquettes. The ideal humidity of the input material is between 8% and 12%, and the particle size between 1mm and 12mm. Technical data: - Production capacity: 1,300 – 2,300 kg/h (for sawdust density 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compression pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gearbox: 5.5 kW - Oil pump: 1.5 kW - Oil pump for extruder head closure: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil system for bronze bearing lubrication: 100 liters - Briquette output monitoring sensor (automatic shutdown when material supply runs out) - Safety covers for moving parts - Oil pressure sensor - Control cabinet - Input material storage hopper (buffer) - Level sensor for feed system monitoring - Machine weight: approx. 7,800 kg The machine is equipped with all necessary accessories for complete operation and integration into a briquetting line: Pedpfjwrp Emex Ab Uogi ACCESSORIES – MB100: - Dosing silo: Made of heavy-duty steel. Diameter: 1,500 mm, height: 1,000 mm. Equipped with a rotary cutter with 2.2 kW gearbox, mounted on a robust steel frame. Material supply is monitored by a level sensor. - Briquette cooling line after extrusion, total length 20 meters - Automatic briquette cutting saw - The saw automatically cuts briquettes to the operator's preset lengths - Device for producing briquettes with a hole - Machine head cooling system with ice water - The system produces 50 liters/min of ice water for effective briquetting head cooling. - Air-cooled water chiller with hermetic scroll compressors, microprocessor control, and a large energy storage tank with an immersed water-to-refrigerant heat exchanger. - The heat exchanger is a high-efficiency fin-pack type, made of copper pipes and aluminum fins. - Water tank with a capacity of 800 liters - Water feed pump (50 l/min – 20 m.w.c. – 0.55 kW) with three-circuit DN25 valves for regulating cooling water temperature at the briquetting head - Digital electronic temperature controller connected to an NTC sensor (measuring element d.6 × 52 mm, IP68, AISI 316) OPTIONAL: NOVAPAC packaging machine Possibility to purchase an additional NOVAPAC packaging machine, fully compatible with the Di Più BRIK MB100 and other machines. An ideal solution for automatic packaging immediately after briquetting. Year: 2013 Price for Novapac: €19,000 Equipment visible in the las

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Cutting height, Scoring unit height - Options: Scoring unit - Spindle speed: Psdeyazbbjpfx Ab Usgi - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. Podpfxoiz Aufe Ab Usgi - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Year of construction: 2008, condition: excellent (used), Oil burner Weishaupt WM-L10 Year :2008 Pedpfx Aboi Ap Ate Ujgi Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 7.5 kW (10.20 HP), type of input current: three-phase, cutting height (max.): 204 mm, height adjustment type: electric, actuation type: electric, Equipment: documentation/manual, saw blade guard, For sale is a high-quality Altendorf F45 ProDrive from 2020 – one of the best sliding table saws on the market. This machine is ideal for joineries, carpenters, timber framers, or ambitious professionals. Technical Data & Features + Model: F45 ProDrive + Year of manufacture: 2020 + Machine height: 910 mm + Eye-level control panel (ergonomic control concept) + Extended cutting height including tilting function + Max. saw blade diameter: 550 mm + Cutting height: 204 mm Podpfxsywi N Ao Ab Uegi + Motor power: 7.5 kW (10 HP), three-phase + Double roller carriage with 3,000 mm carriage length + Table extension: 840 mm + Rip fence: 1,000 mm + Angle crosscut fence + Edging shoe Only 43 operating hours! This equates to less than one working day per year on average – the machine is practically in mint condition and has seen very little use. - Viewing by appointment possible - Loading assistance available - Private or commercial sale - Price: €16,500 net (negotiable) – fair offers welcome If interested or if you have any questions, please contact us! Tel.: 03904/40286

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Pgsdpfxsyt E Rgo Ab Uei Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: new, The ALTENDORF F 25 offers everything in a small space, what a sliding table saw must be able to do. Whether in the first own workshop, for daily use, in industrial production industrial production or as a powerful second machine. - The F 25 is the space-saving all-rounder that simply makes you simply makes you more productive. Materials such as wood panel materials, solid wood, wood-like materials or extruded or extruded profiles can be cut with the best precision, easy handling and outstanding cutting quality can be easily processed. The one-sided swivel Psdsu R S Hcspfx Ab Uogi saw blade also enables angled cuts. The smooth-running double roller carriage based on the Altendorf as well as the digital display of the height and tilt are standard features. A machine for beginners and professionals alike. Double roller carriage, tiltable, man. Height and swivel adjustment, Rip fence with man. Fine adjustment, angle mitre fence, Preparation for retrofitting, of a scoring unit ----- Technical data ----- Swivel range: 0 - 46 °, carriage length: 3,200 mm, Cutting width: 1,000 mm, Cutting height: 100 mm, max. saw blade Ø: 315 mm, max. saw blade projection: 104 mm, Non CE version: max. saw blade Ø: 350 mm, max. saw blade projection: 121.5 mm, Crosscut fence extendable up to: 3,450 mm, speeds: 4,200 rpm, Motor power: 4.4 kW, 5.5 HP, work table height: 880 mm - large extraction hood is optional - - new exhibition machine -

Condition: excellent (used), Year of construction: 2012, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 2012 Operating hours: approx. 820 h Sliding table length: 320 cm Cutting width: approx. 1,013 mm Cutting height: 175 mm Max. saw blade diameter: 500 mm Scoring unit: Yes – Rapido Cutting width adjustment: Electric Pgodeyvqzkjpfx Ab Uei Speeds: 2,000 – 6,000 rpm Speed adjustment: Vario – Stepless Motor brake: Yes