Single-column - eccentric press, eccentric stamping press,

AMBOLD WMW AUE PEEV 25.2

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm Djdjfg E Hpopfx Agdsul table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, Year of construction: 2025, working width: 1,250 mm, bending angle (max.): 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, overall weight: 100 kg, total length: 1,500 mm, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Dusdpocgmf Refx Agdel Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, equipped with: 1 Right hand feeding system Dedsr D N Eqepfx Agdsul 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm output: 10 - 250/min

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Dusdpfxskvnums Agdjl Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Technical characteristics AXIS TRAVEL X AXIS (longitudinal) (mm) 4300 Y AXIS (cross) (mm) 270 Z AXIS (vertical) (mm) 300 ELECTRO-SPINDLE Max. power rating (S1) (kW) 5,5 Max. power rating Max. speed (rpm) 20000 Tool taper HSK 63F AUTOMATIC TOOL MAGAZINE Max. number of tools in the tool magazine 4 standard Max. number of angle machining heads loadable in the tool magazine 2 Max. blade diameter loadable in the tool magazine (mm) Ø 180 FUNCTIONS Multi-piece operation MACHINABLE FACES With straight tool (top face) 1 With angle machining head (side faces and ends) 2 + 2 With blade tool (side faces and ends) 2 + 2 TAPPING CAPACITY (with tap on aluminium and through hole) With compensating chuck M8 Rigid Duodpfsundg Uox Agdjl WORKPIECE CLAMPING Standard number of vices 4 Max. number of vices 6 Power and Motors Pluging: Three-phased Overall dimensions Lenght: 5000 mm Width: 1300 mm Weight: 2000 Kg

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Duodeqgcdtepfx Agdsl Dimensions: 185x180x235 cm LxWxH

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW Dedocp Apyspfx Agdoul weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Year of construction: 2020, condition: new, Available from stock Duodpeiryf Sofx Agdel Strip dimensions: 4420 x 34 x 1.1 mm Cutting capacity (square): 360 x 400 mm Cutting capacity (round): 360 mm bundled cutting: 180 - 280 x 50 - 160 mm Cutting speed: 35 - 85 m/min Motor power main drive: 3.75 kW Engine power hydraulic pump: 0.75 kW Motor power coolant pump: 0.125 kW table height: 755 mm Weight: 1680 kg Dimensions W x D x H: 2400 x 2120 x 1840 mm

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm Duodpfsb U Hwpsx Agdel ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 03.2456, CNC Ibroching machine Dedpfx Agsirwiqedjul Arthur Klink RISH 6.3X1000X400 Renewed in 2016