Display-hydronic *D

ARBURG

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, clamping force: 3,200 kN, screw diameter: 60 mm, injection weight: 723 g, total height: 2,400 mm, overall weight: 17,700 kg, This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Additional equipment • The Wittmann robot is not included • Conveyor belt is included, protective housing only for the electrical components • No other peripherals are included. Machine Benefits Qualitative Machine Benefits • Condition: used, pump overhauled Technical Machine Benefits Nwedpfsx D N Sbox Ag Iec • Known defects: water computer and water batteries should be overhauled (no influence on function) • Machine without handling system and peripherals Extra Information Machine still under power Dimensions Machine Depth 7200 mm

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Nwedperthkusfx Ag Isc Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: used, Year of construction: 2005, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, load hours: 40,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request Nsdpfxsynbcnj Ag Ijwc terms of payment: 100% prior to delivery

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), controller manufacturer: HAITIAN, This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Nsdex D Rbqjpfx Ag Iewc Aditional information • Haitian handling system • Protective enclosure • Conveyor belt for parts storage

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Nwodpfxor Hrqrs Ag Iec Interfaces: Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, screw diameter: 25 mm, This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. • Units available: 2 similar units Nwodpfxox D Rcue Ag Ioc • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 80 A • Heating rated current: 58 A • Total rated current: 138 A • Total connected load: 75 kW • Calibration year: 2027 • 1x unit from 2011 availabe

Condition: refurbished (used), functionality: fully functional, clamping force: 350 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Nsdpfx Agewqnggs Iowc Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team. *The video shown in this listing is of a previously refurbished Arburg 221 which is similar to the Arburg 221KS machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Njdpfoduyyzsx Ag Ijwc

Condition: excellent (used), Year of construction: 2010, operating hours: 75,942 h, functionality: fully functional, machine/vehicle number: 213141, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, Equipment: documentation/manual, Here we offer the following well-maintained used injection moulding machine as an injection moulding machinery dealer. Of course, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Type: 270C 400-70 Controller: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator diverter The machine has retrofitted interfaces for Nodswfua Aepfx Ag Iewc - Tool temperature - Heating circuit - Colour / dyeing via Siemens Logo PLC control German language - Single ownership – Origin: Germany Regular servicing by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 tonnes Tie bar spacing: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mould height: 200 mm min. Max. distance between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrics Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty Warranty valid until initial commissioning Loading/shipping Free loading onto buyer’s truck or free delivery, freight costs reimbursed Available ex our warehouse in Hannover, Germany For your information regarding the machines we offer and our company: - We only sell machines from our own stock, acquired from ongoing production, ex-warehouse Hannover - All offered machines are inspected and tested prior to dismantling - We do NOT sell insolvency goods – we are NOT brokers dealing with third-party property - All machines offered come from successful companies where maintenance and care are carried out as standard - All listed machines can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 Nsdpfxsw Tt R Ie Ag Iewc - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm Nwedpfx Aocp Apysg Ijc no. of strokes 120 Hub/min ram adjustment 55 mm ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Nsdpfjhyumgox Ag Ijwc Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 25 mm, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Nodox Rvciepfx Ag Ijwc Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Year of construction: 1988, condition: good (used), hydraulic clamp vertical adapters for parting line molding capability Nodsbqi Tbspfx Ag Iewc clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Njdpfxjxn Aygs Ag Iewc Shot volume: 392 cc Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse