Log saw diameter 70

BFB

Year of construction: 2026, condition: new, With the separation of milled lumber, laid loose or as a package, already milled lumber can be processed economically. In a two-stage process, the lumber is separated for further processing. It is also possible to insert the separated lumber in a controlled manner in a running process. The feeder is mechanically designed in such a way that even crooked logs can be fed in safely. In addition, it can be adjusted to the diameter of the wood so that only one piece is transported further, thus avoiding stoppages in the further process. Bwsdpfx Anog Rxhgs Uor

Condition: as good as new (ex-display), Year of construction: 2026, S&F drum chipper type ATH 220x530/3 Demonstration machine / trade fair machine / new machine Solid design with long service life Feed height: 200 mm Feed width: 500 mm Number of chipper knives: 2 pieces Number of counter knives: 1 piece Rotor diameter: 520 mm (solid steel rotor) Number of feed rollers: 3 pieces Throughput rate: up to approx. 20 rm/h * Chipping length: approx. 30 mm Chipper drive power: 45 kW or on request Feed roller drive power: 2 x 2.2 kW Operating/control voltage:400/220 V, 50 Hz Bodpfxow I R Rns An Uswr Weight: 2,600 kg *depending on chipper length, kW main motor, number of knives, feed S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: used, Valon Kone VK26M Bwjdpfx Asvgtz Njn Uor With infeed and outfeed conveyors.

Condition: ready for operation (used), Inkjet printer for frame bending machine Bwodpfx Ashzgtujn Ujr Length: 800mm Width: 1000mm Height: 1900mm Weight: about 100kg

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. Bsdpog Rn Avsfx An Uswr For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Send us your inquiry today!

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Bodpfxjw Nrhke An Ujwr

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Bedpfx Anort Uvzo Ujwr Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Very good used condition, fully operational

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm Bwjdpsqup Anofx An Uer - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Bwjdpfxsgtdpmo An Usr Outrigger overhang: 620 mm Cutting depth: 400 mm Table can be swivelled: yes, -0 to +15° Table size: 870 x 620 mm Belt speed: 1660 m/min Motor power: 2.2 kW / 400V Motor brake: yes / automatic Dust extraction port: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle Bwjdpjwa Iz Aofx An Uor