BIESSE wide belt sander

BIESSE SAND REGAL 1350

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hfodpfx Adoxy Tmns Rjg

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request Hedpju Axfcefx Ad Refg -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Hfsdpfevvizkex Ad Rog

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Hjdpfxow Tq Iws Ad Rofg Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Working area X: 6,400 mm Working area Y: 1,500 mm Number of milling spindles: 1 Main motor: 13 kW Maximum rotation speed: 24,000 rpm Tool clamping system: HSK-F63 Tool change positions: 8 Hedpfx Adowlcqvj Rofg Vertical drilling heads: 20 Horizontal drilling units X: 4 Horizontal drilling units Y: 4 2 vacuum pumps, each 360 m³/h Nesting Remote control Software: BIESSE WORKS Overall dimensions: 11,004 × 5,334 mm Weight: 4,900 kg

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes Hedpfxowvq E As Ad Rjfg No. Operating units: 4 Nr

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm Hodpsqlckpsfx Ad Rjfg - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Hedpfswuuc Aox Ad Rsfg Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive Hedpfxoyi U Elj Ad Rofg • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) Hfsdjw A Ruqopfx Ad Rjg No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit