Injection molding machine

BOSSI V160-610

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Crsdpfx Acotk It Sspsh Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) Credpfehknbrex Acpsh - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: new, sheet length: 3200sheet thickness: 13,0total power requirements: 18weight approx.: 9,2messurements (LxWxH): 4000x1900x2350Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. CNC slotted table shears KKI Thanks to durable and durable mechanics and hydraulics, precise backgauge with Ball screw and user-friendly CNC control are KKI guillotine shears highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and Cutting lengths of 3 to 6 m in length are part of our standard portfolio. Of course are on customer request also higher sheet thicknesses and cutting lengths possible. The guillotine shears owe their long life to their particularly robust construction with fully welded frame. The entire machine body, the cutting beam and the Backgauge are insensitive twisting and deformation and thus enable highest cut quality. By entering the sheet thickness and material type, the CNC control calculates Fully automatically the required cutting angle and kerf. Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. Technological advantages     Fast and precise cuts     Stable, durable frame construction     Automatic kerf adjustment and angle adjustment     Easy handling     Low maintenance costs     High safety standard     Use of components from well-known manufacturers     Low unit costs Technical specifications: Sheet thickness: 10 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 1.8 ° Backgauge: 1,000 mm via CNC Motor power: 11 kW Length: 3,800 mm Width: 2,050 / 2960 mm Height: 2,150 mm Weight: 8,650 kg Crodpfx Asfl S Efecpsh • Stage execution • CNC Control - backgauge - Cutting angle - kerf - Cutting length • Ball screws for the back gauge • balls in the table • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm • Cut line lighting • Foldable up to 1,000 mm finger protection Incl. pneumatic sheet holding We have many references!

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. Csdjilfkrepfx Acporh We have two identical machines available.

Condition: new, Year of construction: 2022, functionality: fully functional, Make Kiefel Natureformer Model KFT 90 Speed Cjdpfx Acowkkpqoporh Year 2022 Condition New - Machines are unopened and still in original packaging from Kiefel. Forming Area 900 x 600 mm (35.5 x 23.5 in) Max Height of Formed Part 120 mm (4.75 in) Punching Force 600 kN Shot Weight Max. 300g (10.5 oz) Cycle time 15 seconds +/- Machine picture shown is for example only. Machine has not been installed.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Cjdpfxjygikwo Acpsrh Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: Crodpfx Ajw U Tylocpsh - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Csdpfswp Ac Hex Acpsrh Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. You can find an exact specification in the documents. Codpfxjzww D Ss Acperh Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops weight 8500 kg Cjdsznvgmepfx Acporh