High Speed Automatic Press

Bruderer BSTA 25 EL

Condition: used, Year of construction: 1992, functionality: unexamined, Technical Specifications Tjdpfx Agoyktftevob Make and model: Bruderer BSTA 25 EL Nominal capacity: 250 kN, 25 tons Year of manufacture: 1992 Year of control upgrade: 2020 Max. number of strokes: 100/1425 Adjustable stroke: 13, 16, 19, 25, 32, 38 mm Table dimensions: 640 x 530 mm Passage between the supports: Longitudinal 640 mm; Lateral 220 mm. Fitted with roll feeder BBV 190/85 on right hand side. Max width of strip: 160 mm Feed length: variable up to 85 mm max Optional: Sound insulating cabin Oil pump. Heat exchange oil cooler. Front and rear safety guards. Fitted on 4 spring feet. Slide/Ram adjustment: 51 mm Documentation included. Press weight cca. 5000 kg.

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm Tedjvwgl Nepfx Agvjb COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Tsdeur N Dajpfx Agvsb The machine is ready for immediate use!

Condition: excellent (used), Sound insulating cabins. For Bruderer high speed automatic presses. Tsdpfxoiw Icbo Agvsb On stock available cabins for machines: BSTA 25 BSTA 41 BSTA 50 BSTA 60 BSTA 80 Cabins sold refurbished, carefully disassembled and packed for transport. Painted in white and anthracite (or colors requested by customer). Cabin is equipped with all needed holes for easy use of a Bruderer press. Front and rear doors with inspection glass. Air ventilator for climate control on top cover. For more information don't hesitate to contact us. We have on stock Bruderer BSTA 25, BSTA 30, BSTA 50, BSTA 110, also Mabu and Schaal automatic punching machines.

Condition: like new (used), Capacity: 2.500 kN Specification: Threshold setting: Reading begins at 1% of capacity (75 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Tjdpfx Aefpwmpegvob Overload: 150% of capacity (3.750 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 185 L x 200 W mm, height app. 127mm Height sets to 5.0000" +/- 0.0005" Weight: app. 13 kg inckuding carrying box

Condition: good (used), Coordinate grinding machine Jig grinding machine Tsdpfx Ajktkmvsgveb Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Tedsu Ef Dqjpfx Agveb Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg

Condition: good (used), Year of construction: 1965, Model maker milling machine with swivel head, MK 4, rotary table, d. Accessories Tedpfxsq Ixz Ro Agveb Year of construction: 1965 X (mm): 1000 Y (mm): 600 Mounting (iso/mk): 4 Power (kw): 2

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Type: M 50 F Todpehktttsfx Agveb Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: refurbished (used), Year of construction: 1998, operating hours: 20,800 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, Machine currently undergoing revision at our facility in Semsales, Switzerland. Erowa ITS50 chuck. 16-position rotary tool changer, double gripper. Flat LCD screen. Retractable work tray. Inspection possible upon request. More details available on request. Tedpfxjxlhuds Agveb