Vertical Turning Machine

Buderus BV 1250

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Csdjwwar Iepfx Af Degl Machine connected load approx. 75 kW

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm Codpfxsv Iplao Af Djgl turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: excellent (used), Year of construction: 2020, operating hours: 8,052 h, functionality: fully functional, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,345 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,875 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,345 mm, feed rate X-axis: 24,000 m/min, feed rate Y-axis: 24,000 m/min, feed rate Z-axis: 24,000 m/min, torque: 3,430 Nm, workpiece weight (max.): 4,000 kg, total height: 4,950 mm, total length: 7,029 mm, total width: 5,200 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 51,200 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 500 rpm, distance table center to spindle nose: 1,600 mm, spindle motor power: 37,000 W, spindle nose: A2-11, tool length: 300 mm, type of input current: AC, turning diameter: 1,450 mm, turning diameter over cross slide: 1,250 mm, spindle diameter: 160 mm, bar passage: 160 mm, chuck outer diameter: 500 mm, collet bore: 160 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 25,000 N, milling spindle length: 300 mm, quill diameter: 160 mm, quill stroke: 250 mm, quill travel distance: 250 mm, spindle bore: 160 mm, swing diameter over bed slide: 1,450 mm, swing diameter over cross slide: 1,250 mm, swing diameter over top slide: 1,100 mm, turning diameter over bed slide: 1,300 mm, turning length: 1,600 mm, Equipment: chip conveyor, documentation/manual, For sale: Mazak Integrex e-1250 V/8 mill-turn center complete with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Specifications – Integrex e-1250 V/8 • Travel: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 positions (CAPTO) • Control: Mazak SmoothX with 5-axis functionality • Operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining • Coolant system: High-pressure system up to 70 bar, Mayfran belt filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw touch probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-cutting functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) • Fine spline interpolation (EIA) • Mazatrol turning/milling function • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay racking solution for flexible manufacturing • Ideal for both series and mixed production • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & print) • Full package: machine + automation + accessories _____ Your Advantage Cgodpfxoxgu E Ee Af Dol • “Done in One®” concept: all machining in a single setup • Productivity: 5-axis machining + turning + pallet automation • Flexibility: From single parts to series production • Efficiency: Automatic pallet change & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery terms upon request

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - X/Z stroke : 285/1150 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : 0/30 [°] * Grinding wheel dimensions : 500x63 [mm] PART-HOLDER HEADSTOCK - Type of cone : ISO50 - TAILSTOCK POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 28230 [h] Cgsdpfxsxt U Rhs Af Dol EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel - Automatic diamond device - Coolant tank * with paper filtering unit

Condition: used, Year of construction: 2010, functionality: limited functionality, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 22 kVA, controller manufacturer: Haas, controller model: MOCON 17.28, table width: 1,626 mm, table length: 710 mm, overall weight: 12,000 kg, spindle speed (max.): 7,500 rpm, number of spindles: 1, number of slots in tool magazine: 30, type of input current: three-phase, Equipment: chip conveyor, Vertical 3-axis machining center Haas VF6 / 50 HE Linear guideway machine with up to 610 Nm torque (at 500 rpm) Travel paths: X 1626 mm Y 813 mm Z 762 mm Linear position measurement system 2-speed gear spindle SK50 with 7,500 RPM and 22.4 kW Automatic tool changer with 30 +1 positions Internal coolant supply with 1000 psi (approx. 70 bar) Coolant tank 360 liters Spiral chip conveyor Includes: Oil mist extraction unit Ethernet interface RENISHAW wireless tool measurement system Additional loading fixture for inserting tools into the machine Macro programming enabled. Cedpjw Rbx Usfx Af Dogl The machine is only partially functional.

Condition: like new (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 61373, IT IS IN WORKING CONDITION Cgjdpfx Afovwlf Io Dsl

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m Photos of identical machine with centre height 225mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Basic equipment: -T1 500mm grinding disc diameter -T2 400mm grinding wheel diameter -Infinitely variable, high-resolution axis -Marposs measuring device for tool measurement -Active longitudinal positioning -GAP on T1 and T2 from ELASO contactless integrated in the control interface Semi-automatic balancing from ELASO integrated into the control interface -Tailstock with manual retraction -MK5 workpiece headstock with short taper DIN 55026 Belt-driven internal grinding device Options at an extra charge: - New high-precision workhead with torque drive - Internal grinding device for high-frequency spindles diameter 120mm -HF internal grinding spindle Fischer MFM-1224/42/31 D-21 -HF spindle with HSK holder 24,000 rpm with integrated GAP sensor. (delivery time) -CNC-controlled C-axis non-circular grinding -hydrostatic threaded spindle in x -new hydrostatic unit with only 1 pump and pressure accumulator thus better energy efficiency. -monitoring of the water content in the hydrostatic system -Suction system Further options available on request Mechanical overhaul: -Complete machine overhauled according to Kellenberger measurement protocol -New service-friendly cab -repainting Electrical overhaul: -New modern CNC CIRCULAR GRINDING MACHINE control with BEMA rough grinding surface -New control cabinet -New drive technology -Replacement of all electrical cables Berus pressure switches etc. -New absolute glass scales in x and z -New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic licence and various options that are possible depending depending on the equipment of the machine. Basic software - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal pendulum grinding - External and internal plunge-cut grinding - External and internal taper pendulum grinding - External and internal radius grinding, radius dressed on disc - Semi-automatic pendulum grinding - Workpiece zeroing - Grinding wheel zeroing - Measuring the dressing diamonds - 2 moulding diamonds - 1 shaped diamond or dressing roll (dressing roll required) - Moulding roller (dressing roller required) - 3 Flat dresser - Corrections - Z-position measurement (probe required) - GAP probing (grinding device required) OPTIONS at an extra charge: Software profile plunge-cut grinding: - External and internal profile plunge-cut grinding with profile disc Profile grinding software: - External and internal profile grinding with straight disc Software thread grinding: - Single and multi-start external and internal thread grinding with thread on the disc Cgedpfx Afouxfucs Djl disc Dressing. Dressing of single and multi-groove discs. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge-cut grinding: - External and internal non-circular plunge-cut grinding Non-circular grinding software: A prerequisite for non-circular grinding is that the workpiece axis is equipped with a high-resolution rotary encoder so th...

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Cedpfx Afohvml Ij Dsgl Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: used, Year of construction: 2000, greates pass round over bed 520 mm swing diameter over bed slide 480 mm turning length 3000 mm control 840 D SIEMENS number of tools 12 Driven tools - quantity 6 spindle bore 103 mm Cgsdpfx Ajwp S Sqef Dsl c-axis ja 0 Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POWER CHUCK 3 NHF 315-82 A8 FABR. FORKARDT with centrifugal force compensation, Outer Ø 315 mm, bore Ø 82 mm, with hard top jaws, ground, rod material Ø max. 63 mm including draw tube and attachment

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Cgedowfunyepfx Af Dsl Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features