1998 Camam C/1N/1S

Camam C/1N/1S

Year of construction: 2005, condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 Godpfxjg Rn Iao Ag Tsil TECHNICAL DATA: Year of manufacture: 2005 Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor Gisdpfxsin Ub Te Ag Tjl - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission Gisdpsvu Hgbsfx Ag Tjl - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Year of construction: 2010, condition: excellent (used), I sell the window prodution sets of tools suitable for CNC window angular profiling centres: LEUT Wood-Alu 110mm Hole 50mm. Gsdpeg Tumyjfx Ag Toil All complete. Very good condition. Available as a set. Possible to buy also separately.

Year of construction: 2024, condition: new, AMF Reece S4000-ISBH AMF Reece S4002-ISBH AMF Deco 3000 ATT Motor DC Drive Sewing Speed 1,500 - 3,800 spm Stitch Type Single Thread Chainstitch Stitch Density 3 - 12 s/cm (8 - 30 spi) Stitch Bite 1.7 mm - 2.3 mm (1/15" ~ 3/32") Number of Buttonholes 1 - 8 Distance between buttonholes 4 - 63 mm (3/16"~2-1/2") Adjustable in Program Buttonhole Length 15.8 mm - 25 mm (5/8" - 1") Max Distance from Edge 67 mm (2-5/8") Max Distance First to Last Buttonhole 63 mm (2-1/2") Angle Adjustable 0~6° Thread Trimming Pneumatic Recommended Thread Core Spun Polyester #50 Recommended Needle AMF Reece Series 750 #90/14, #80/12, #70/10 Clamp Height 12.7 mm (1/2") Max Work Thickness 3 mm (1/8") Clamping Step Motor Lubrication Semi-Automatic Control System PLC Table Types Crosswise Electrical Requirements 230V, 50/60Hz, 1 Ph Air Requirements 5.5 basr (80psi) 14ℓ/㎥ (0.5cfm) Gijdpfxotp Nwbo Ag Tsl Dimensions Head and Table 1100 mm(L) x 600 mm(W) x 710 mm(H) Dimensions Packed Weight 1300 mm(L) x 770 mm(W) x 1150 mm(H) 171kg

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom Gedpjwyda Usfx Ag Toil electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Godpfx Agot Tqy Ej Tjil Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Gisdpop N D Ngofx Ag Tel Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Gisdpewk D Dzefx Ag Tol Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: good (used), Profile Sander Composition: • 1st belt unit Gjdpfxsuggm Ho Ag Tsil • 2nd belt unit • 3rd Scotch-Brite unit Total installed power: 8.6 kW