Gear hobbing machine

CELTA C-4

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Ppedjruakgjpfx Ahlsw Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Diameter 120 mm Inner diameter 40 mm Ppodpfxedklt No Ahlow

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Ppedpfxsr Elpvs Ahlew Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Pjdpfowl A H Dex Ahlepw Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm Ppodpfx Ahjv T Nqaelsw - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg. Pedektkmvjpfx Ahlopw

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Ppedpfx Ajxtiunohlow Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Make: STAEHELY SH 500 Pedpfoxfub Djx Ahljpw Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Pjdpfxswwkace Ahlepw Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Psdpfxst Hxcnj Ahlspw Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract