Band saw, band resaw

CENTAURO Supercut 80

Condition: new, Year of construction: 2025, functionality: fully functional, exhibition machine minimum slat thickness 2mm magnetic fence position reader adjustable pulling roller spacing material presence detector Lsdpjv Dh R Tjfx Aiksrl tape cooling/lubrication system wheel diameter 800mm engine power 15kW smooth feed speed adjustment pneumatic pulling roller pressure control panel with colour touch screen screw tape centring pneumohydraulic tape tensioning year of production 2025 - brand new machine total weight 1300kg 380V power supply Machine available in March

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Lsdpfx Aiexnlgcsksrl Storage location: Garbsen

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter Lrodpewyda Uofx Aikel pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: good (used), Code: 0299 Brand: SCM Model: S 630/E - CE Standard Lrsdpfxoyi E T Tj Aikjl Automatic thickness planer for carpentry workshops, custom furniture, wooden window frames, wooden carpentry, sawmills, plastics, composite materials, and various - CE Standard Technical data: Electronic table positioning Pneumatic roller pressure adjustment Drive system with 3 large-diameter motorized upper rollers - Easily interchangeable Electronic feed speed variator 4/20 mt/min Work table dimensions 630 x 1000 mm Max working width 630 mm Min/max working height 3/300 mm Min working length 260 mm N° 4 knives Motor Hp 7,5 Feed motor Hp 2 Suction mouth diameter 150 mm Overall dimensions mm 1360 x 1080 x 1220 h Weight kg 1000

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Milling head debarking, scraper chain conveyor with discharge Log sorting system left/right Control panel and electrical cabinets Lrodpfxsxvq Hkj Aiksl

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Lodenfvxzspfx Aiksrl

Condition: like new (used), Year of construction: 2003, functionality: fully functional, Industrial Band Saw R800 - CENTAURO Used machine Year: 2003 Technical specifications: R800 disc wheels Steel frame Pneumatic braking of wheels 15° tilting table Friction rack Felt for blade cleaning and cooling Motor: 11 kW - 15 HP Automatic star/delta starter Telescopic blade guard Upper and lower blade guides with wooden inserts Cleaning scrapers on wheels Steel blade 5530x80x0.8 mm, 16 mm pitch Prepared for power feeder (not included) Machine options: RVP210 power feeder, variable speed + preparation and infeed rollers Ljdpfx Aiox Ifigekjrl

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture Lodpjw H Rq Hofx Aikjrl - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), functionality: fully functional, Vertical, double-sided press for wood by C.O.P.E. Ledpfeudy A Nsx Aikjrl Two working fields with dimensions of 620x110cm.

Condition: ready for operation (used), Diameter range: 50 mm - 108 mm Height range: 38 mm - 197 mm Lrodpfx Astqmrysikjl Production capacity: up to 500 c.p.m. No. of heads: 6