VERTICAL MACHINING CENTER

CMS ATHENA 3015

Condition: good (used), Year of construction: 2020, Traverses X Y Z; 3200 x 1500 x 900mm. Bedpfxezcv T Ds Afgjdi B axis +/- 120 degrees, C axis 370 degrees, Feed rate 90m/min, spindle speed 24,000rpm, spindle taper HSK 63.

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Bedpfx Afsyxl Epogjdi Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. Bsdpsyk Utxsfx Afgjdi The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: used, pressure 160 t passage width / mm stroke / mm Bodpfjiulkqex Afgodi Working height 800 mm total power requirement 15 kW weight of the machine ca. 11,8 t - Table size: 1000x1000mm - Distance table/ram, large stroke above, gain. above: 800mm extra information Removable table

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Control: Heidenhain TNC 430 Bdjdpfx Ajyaazmsfgei X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm In 2018, the Heynumill underwent a complete overhaul of the hydraulic system, replacement of all electrical cables, renewal of the spindle cooling unit, both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The entire refurbishment cost €160,000. In 2020, the milling gearbox was renewed.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Bdsdpfofy T H Isx Afgji Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: refurbished (used), Our Pfeiffer Vacuum Okta 6000 Roots-blower pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice Bdedefq D H Sspfx Afgsi included one-year warranty

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI Bdodpfx Ajfbgz Isfgsi type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: ready for operation (used), Year of construction: 2008, - USED - 5-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE     X-AXIS TRAVEL: 1750 mm Y-AXIS TRAVEL: 1400 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS X-Y-Z: 35 m/min SPINDLE: 18000 rpm; 18,5-25 kW; HSK A63 TABLE SIZE: 1000 x 1200 mm MAX ADMITTED LOAD: 5000 Kg TOOL MAGAZINE: A CATENA ; 30 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 18000 Kg OVERALL DIMENSIONS: 6000 x 4000 x 3850 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL ; Bdsdpewl R Ddsfx Afgei LASER TOOL SETTER

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 100 kg, total length: 800 mm, total width: 600 mm, total height: 1,660 mm, input voltage: 230 V, input frequency: 50 Hz, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, laser type: fiber laser, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Bdsdev Sybyepfx Afgoi Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg