Center Lathe

COLCHESTER STUDENT 2500VS

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable Kedpfx Aoh Ux Rweqpedl LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Kdodpfx Ajd Eaukoqpel

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears Kdjdetycpaopfx Aqpel *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Kdodpfx Aexx Tigsqpsl Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Kdodpjxacirefx Aqpol range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: good (used), roll diameter 420 mm throat 405 mm workpiece height 380 mm cutting speed 16 - 2200 m/min table surface area 615 x 615 mm Kdsdsxf Nahspfx Aqpsl saw band length 3450/3650x6-20x0,9 mm work height max. 955 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 470 kg dimensions of the machine ca. 1250 x 1000 x 2100 mm From a training workshop Good condition (!!) Features: - Robust, vertical band saw machine - Frequency-controlled, infinitely variable belt drive - Belt guide height adjustment with hand wheel - IDEAL belt welding system, with shears and grinding motor - Swivel table 15°/45° - Machine base - Swiveling machine lamp

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM Kdjdpfswgyrtex Aqpjl - Year of manufacture: 2009

Condition: good (used), NHH lathe Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Kedpfx Aqoqgdkijpedl Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: used, Year of construction: 2026, TYTAN 750 PRO 400V universal lathe. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking and reaming holes. It is usually used in small industrial plants, workshops, garages, etc. Machine description The TYTAN 750 VARIO PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine that responds to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. Main advantages: + A modern motor with smooth spindle speed regulation ensures comfort of use and shortens the calibration time. Ksdpfx Aqsygtrropedl + The LCD screen with the spindle speed display allows you to control and quickly modify the spindle speed while setting the cutting and tapping modes. + Two spindle speed ranges: reduced (50-1250) for machining hard steels and increased (100-2500) for high-speed precision turning. + Threads cut: metric - 18 degrees (0.2-3.5), inch - 21 degrees (8-56) left and right threads can be cut. + The automatic longitudinal feed has 6 speed ranges (0.07 to 0.40) mm / rev. - thanks to it, the machining time is much shorter, which does not deteriorate the quality of work when turning long parts. + The TYTAN 750 vario PRO lathe, thanks to the smooth spindle speed adjustment, is an ergonomic machine responding to the user's needs. Reducing the time it takes to set up the machine while machining parts of a wide range of sizes translates into efficiency and ease of use. + The machine is fully compliant with the requirements of EU directives (CE) as well as Polish regulations and DIN standards. Technical parameters dimensions Turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Claw spacing 750 mm Bed width 135 mm Spindle passage 27 mm Spindle taper MK4 Spindle speed adjustment smooth Spindle speed 50-1250 | 100-2500 rpm Number and range of metric threads (18) 0.2-3.5mm / rev Number and range of inch threads (21) 8-56 zw./cal Number and range of feeds 0.07-0.4mm / rev Top slide travel range 70 mm Maximum cross slide travel 135 mm Maximum travel of the longitudinal slide 650 mm Maximum tool size 16 x 16 mm Feed the tailstock sleeve 60 mm Tailstock taper MK2 Handle size 125 mm Spindle motor 1.1 kW L / W / H 1,350 x 560 x 1,250 mm Weight 170 kg WARNING! THE MACHINE HAS A MANUFACTURING DEFECT: THE BED IS NOT HARDENED.

Condition: new, Type MB504B Working width 400 mm Overall length 2200 mm Measurements of fence 870x100 mm Fence tilting 45° Number of knives 3 Kdsdpfxod Srrdj Aqpsl Speed of spindle Motor power 4 kW