Cutting mills

Condux CS 750/600

Condition: new, machine/vehicle number: Baureihe GSE / Neumaschine, Economical cutting mills: This GSE series is ideal for all injection molding and blow molding companies. It is basically suitable for all thin-walled plastic waste. These cutting mills are characterized not only by their low purchase price, but also by their robust, split steel/welded housing, the easy cleaning option and easy blade and screen changes. Thanks to the tangential housing geometry in conjunction with V-cut rotors (except GSE 300/300), even bulky and large-volume feed parts are accepted and shredded by the rotor. Itodpfjghgbtjx Ahyob Grinding material transport: The cutting mills are equipped with an extraction system and bagging station as standard. A grinding material collection container is also available as an option, which, like the extraction tray, is made of stainless material.

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm height of form 120-350 mm Itedpfx Ahofrvzvjyjb column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Itsdpfx Asu Eu Tnjhyeb Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Itjdpfx Asff Sbiohyob Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February. Itjdpeumubyjfx Ahyob

Year of construction: 2008, condition: like new (used), Polytype 8 Colors Printing Cup , Type BDM 691, Year 2008 Colours : 8 colours Maximum output/hour : 36.000 cups/hour Minimum cup diameter : 60 mm Maximum cup diameter : 100 mm Minimum cup height : 35 mm Maximum cup height : 160 mm UV system : Uviterno Pre treatment : Corona, Arcotec Reference : B-21020 Itsdpfxjhbdacj Ahyob

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 Iedeiyx Uzjpfx Ahystb 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 1998, condition: like new (used), VAN DAM 568 COM III 8 COLOUR CUP PRINTER 560 COM III 8 COLOUR CUP PRINTER, the machine is in good condition. The specifications are listed down below. Itedpfx Ahsh Ha I Ejysb Machine Type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition If you have any questions about the machine or it's specifications you can always contact us.

Condition: good (used), Offer freezer for freezer production. Various spare parts available. Motors only replaced two years ago. Fully functional. Ijdpfx Ajt I Eycjhystb Collection only in 93437 Furth im Wald Sale without guarantee, warranty and return

Condition: excellent (used), Offered is a used slurry pump / sewage pump. SDAG Wismut-Aue. Details see photos. Itsdpfxshwnfce Ahyjb