Vertical machining center

Deckel Maho DMF 250 Linear

Condition: ready for operation (used), Year of construction: 2002, operating hours: 55,730 h, General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Gsdpewxz Igjfx Ah Eobw Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open General Data Machine weight 24500 kg Control Unit Brand SIEMENS Model Sinumerik Main Drive Spindle speed range 12000 Spindle motor power 35 kW Number of axis 3 Movement X-Axis Rapid Traverse 100 m/min Y-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 60 m/min Table Table load 3100 kg Turret Number of tool slots 9 Tools Max weight 6 kg (SK40/HSK63) or 12 kg (SK50/HSK100) Type of tool holder HSK-63 Additional Equipment Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm Gsdpfjwlvi Eox Ah Esbw tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Godpfx Aovamqdeh Eobw

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,421 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Gedpfx Asxfcqysh Eebw Spindle speed range 18000 Tool taper BT40 Number of axis 5 Movement X-Axis Movement 2500 mm Y-Axis Movement 920 mm Z-Axis Movement 820 mm This 5-axis DECKEL MAHO DMF 250 linear was manufactured in 2006. It features a Heidenhain iTNC530 control, extensive travel capabilities with X2,500mm, Y920mm, Z820mm, and a high-speed spindle at 18,000rpm. The machine includes a BT40 spindle taper, ATC 30 magazine, and full NC rotary capabilities on A, B, and C axes. Consider the opportunity to buy this DECKEL MAHO DMF 250 linear universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2003, Controller Heidenhain TNC 426/430 Table size 800 x 500 mm Gbedpfjuiif Dex Ah Eew Table load 500 kg X travel 630 mm Y travel 500 mm Z travel 500 mm Spindle speed 8000 rpm Tool holder type SK40 ATC magazin 24-fold Repid speed 30 m/min Weight 4500 kgs Dimensions LxWxH = 3100 x 2100 x 2400 mm Accessories - Coolant tank - 4th axis with index table - MPG - Manuals The machine was used barely.

Condition: good (used), Year of construction: 2010, Heidenhain 530 Control, Traverses X Y Z: 1050 X 510 X 510mm, Table 1300 X 550mm, Distance From Spindle Nose To Table 150 ~ 660mm, Maximum Workpiece Weight 1200kg, Spindle Speed 0 – 12000rpm, Spindle Taper DIN40, Gjdpfx Aeucdvqeh Eobw Spindle Motor 11kW, 30 Station ATC, Swarf Conveyor, Coolant, Low Volt Light ,

Condition: excellent (used), Year of construction: 2018, Swing over carriage 355mm, Bar capacity 65mm, Maximum machining diameter 310mm, Maximum cutting length 521mm, Spindle speed 4,000 rpm, Milling speed 5,000rpm, C axis 0.001 degrees, spindle power 22/18.5 Kw, Gbodpfx Ahjrztr Ro Esw 12 station turret, Fanuc 32i control, swarf conveyor, tool setter , 3 jaw chuck

Condition: used, Year of construction: 2011, turning length: 510 mm, turning diameter over cross slide: 290 mm, spindle motor power: 15 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 510 mm, chuck outer diameter: 170 mm, overall weight: 3,300 kg, Equipment: documentation/manual, Controller: Fanuc i-series. - Tool holder type: BMT 45 - Turret: 12 positions (12 driven) Gedsw Duygspfx Ah Eobw - Manual tailstock - Coolant: 7 bar - 3-jaw chuck 170 mm - 4-jaw chuck 170 mm - Radial and axial driven tool holder: 1 pc each

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW Gedpfx Aov Rdzbjh Ejbw weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head *

Year of construction: 2021, condition: as good as new (ex-display), Highlights: - Powerfull motorizied spindle 16.000 U/min | 206 Nm - Hydraulic clapming for fixtures - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector Machine cooling system with an air-cooled cooling unit Machine control series FANUC 31i-MODEL B Plus Cycle package for measuring probes (RENISHAW) Control panel to enter tool data at tool loading and unloading position Rotary table with GROB pallet clamping system (B-axis) Motorized spindle HSK-A 63, 16,000 rpm, 159/206 Nm, 25/32 kW, oil-air lubrication GROB spindle diagnostics GSD Single disc-type magazine HSK-A 63 with 50 pockets Tool cleaning device Electromechanical tool breakage detection device Twin palette changer Setup station driven by a three-phase servomotor Setup station door, manually-operated, for manual loading/unloading Additional control panel Pallet 630 x 630 mm, T-slots Equipping the pallet with 12 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (23 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Cutting fluid recirculation on the weekend Flush gun at the work area Air gun at the work area Part clamping system in work area, customer-specific Hydraulic power unit for the part clamping system Gjdpfxolaugao Ah Esbw KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) Cooling unit for hydraulic proportional valves Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP3: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP5: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP6: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP7: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP8: Compressed air, seating check system (P2.1) KP10: Compressed air, seating check system (P2.1) KP11: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP12: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) Touch probe Renishaw RMP60 12-month warranty