Universal machining center

DMG 125P

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,180 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine Hnodpfx Abjx Sz Dhs Tji • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Dimensions Machine Depth 8000 mm Technical Specification Taper Size SK 50 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head Froehling Froehling is a renowned brand recognized for reliability and robustness in the field of rolling mills. 4Hi rolling mill head with bending and coilers. Specifications: Manufacturer: FROEHLING (Germany) – Refurbished 2004 Processable material: Aluminum alloys – brass – copper – low carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 - 2mm Coil size: ID 400mm – OD 1500mm Hsdpeg Ryqkjfx Ab Teni Max. rolling speed: 400m/min Work rolls: Diameter 130mm – Table 340mm Back-up rolls: Diameter 390mm – Table 335mm Complete with: Uncoiler and recoiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, dismantled and loaded on truck. Ready for inspection by any interested buyer. For any questions, do not hesitate to contact us. PLEASE SUBMIT YOUR OFFER IF INTERESTED, WE WILL SURELY REACH AN AGREEMENT TOGETHER.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 23,576 h, functionality: fully functional, machine/vehicle number: 10980001683, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain, workpiece length (max.): 300 mm, workpiece width (max.): 160 mm, rotational speed (max.): 18,000 rpm, overall weight: 13,000 kg, spindle speed (min.): 20 rpm, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, I am selling here a DMG 125 P 5-axis machine Simultaneous 60 tool slots, the tools are included in the total price Hnjdpfxowqpnle Ab Tsi Inspection possible at any time The machine was running until recently and is fully functional.

Condition: defective spare-parts repository (used), Year of construction: 2000, 5-axis machining center DMG Type:DMU125 P Year 2000 Control Heidenhain TNC430 Machine with HV milling head and NC swivel rotary table. Spindle holder ISO 50 Spindle speeds up to : 8000 rpm Travel X 1250 mm Y 880 mm Z 800 mm A-axis and B-axis Tool magazine pos.120 . Machine documentation available Hodpfxeuwnzvo Ab Toni Machine is not ready for use without chip conveyor .

Condition: good (used), max. wheel diameter 1600 mm gear width 250 mm max. module 30 min. module 8 range of tooth size 58 mm tooth width 250 mm weight of the machine ca. 42,3 t dimensions of the machine ca. 4,45 x 6,00 m - Cone spacing in mm. for spiral angle 30° minimum: 150 maximum: 800 Hjdeu Dbucjpfx Ab Toni - Taper angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / accessories: - complete set of change wheels - 4 pcs. cutter heads - various milling cutters - Operating instructions in English

Condition: ready for operation (used), Year of construction: 1988, SARATOV 5C280P Spiral Bevel Gear Generator - 2 machines Max gear diameter: 800 mm Max module: 16 Max gear ring width: 125 mm Number of teeth: 5-150 Hnedpjum Ez Rofx Ab Tji Spindle speed range: 20-125 rpm Main motor power: 7.5 kW Overall dimensions (LxWxH): 3170x2180x2200 mm Weight: 15 t SARATOV 5C276 Straight Bevel Gear Generators Module (mm): 10 Max. gear wheel diameter: 500 mm Max. bevel gear cone distance: 250 mm Max. gear ring width: 80 mm Min. angle of dividing cone (pitch): 5 degrees Number of gear teeth: 10 – 150 Distance between spindle and machine center: max. (stock angle 5°): 375 mm; min. (stock angle 90°): 75 mm Stroke: 100 mm Slider double stroke: 48 – 400 spm Motor capacity: 4.0 kW Machine weight: 8750 kg

Condition: good (used), Year of construction: 2022, operating hours: 6,099 h, functionality: fully functional, machine/vehicle number: 6500014216, cutting range round steel at 90°: 240 mm, cutting range round steel at 45°: 240 mm, cutting range angle steel at 90° (X-axis): 180 mm, cutting range angle steel at 90° (Y-axis): 180 mm, cutting range angle steel at 45° (X-axis): 180 mm, cutting range angle steel at 45° (Y-axis): 180 mm, type of input current: three-phase, total length: 14,000 mm, cutting range square steel at 90°: 180 mm, cutting range square steel at 45°: 180 mm, feed length Y-axis: 7,500 mm, product height (max.): 12 mm, Tube laser Bodor T230-650CE 4K laser power: 4kW for tubes and profiles 7500mm length × 20-240mm diameter round 7500mm length × 20mm-180mm square automatic loading 3000-6200 Laser head 2½D Hnedpevvlbtjfx Ab Toi Selling due to purchase of 3D You can always come and see this machine running.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 2,100 h, turning diameter over cross slide: 200 mm, spindle bore: 66 mm, turning diameter over bed slide: 435 mm, center height: 217 mm, turning length: 1,000 mm, total length: 3,061 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 1 rpm, bed width: 202 mm, For sale: WEILER E40 Precision Lathe – only 2100 hours on the clock, Machine condition as new. Features a 435 mm swing over bed, 200 mm swing over cross slide, 66 mm spindle bore, and a 1,000 mm turning length. Perfect for workshops needing accuracy and durability. The machine is equipped with standard factory equipment (turning bushings, a lathe center, and PARAT tool holders). Hnodpfov A Irzjx Ab Tei *The price stated in the advertisement is the net price. The seller is a private individual.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Hnsdjrtrzdjpfx Ab Toi Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, table length: 1,200 mm, table width: 600 mm, spindle speed (max.): 12,000 rpm, table height: 560 mm, table load: 900 kg, Machine with just revised spindle, never used after Connected to power and available for inspections and tests Hnodpfx Aorb Amlob Tei Lubrication through spindle 30 Tools Heidenhain 530