CNC turning and milling center

DOOSAN PUMA 2600 YB

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, total height: 2,163 mm, total width: 1,945 mm, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,873 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600YB II was manufactured in 2019. It features a maximum turning length of 725 mm and a swing over bed of 780 mm. The machine is equipped with a FANUC i Series controller and includes 12 turret stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600YB II machine we have for sale. Contact us for further details. • Working hours: 4436 h • Parts count: 305 • Swing over bed: 780 mm • Swing over carriage: 630 mm • Max turning length: 725 mm • Bar capacity: 102 mm • Spindle nose: ASA A2#11 • C-axis indexing: 0.001 degrees • Turret stations: 12 • Driven tool speed: 5,000 rpm • Rapid traverse (X/Z): 30 m/min • Tailstock taper: MT#5 Additional equipment • Chip conveyor Dcsdpfx Aoy A N Dqonwog • Tool setter • Manuals • CE Declaration Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Manufacturer: CINCINNATI Dcjdpfx Anewrpykjweg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil. Dcjdpfx Anowpu Etowsg

Condition: ready for operation (used), The machine is in very good condition and can be tested on site. Technical Data – Grinding Machine Machining area (mm) Height x Length x Depth: 80 x 110 x 55 Motor power (kW): 0.5 Speed (min-1): 5000 Feed rate (hod/min): 150 Table load (kg): 20 Control: BOSCH Accuracy: 0.005 mm, reading via CNC, template grinding 1:10, 1:20, or 1:50, suitable for rough grinding. Dcjdpswvgidjfx Anwjg If you have further questions, I am at your disposal.

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm coil weight: 12,5 t Dsdpfx Anobh Ubwowecg mandrel Ø: 508 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: Haas Model: ST-30Y Year of manufacture: 2019 Control: Haas Technical Data: Max. swing diameter: 533 mm Max. machining diameter (with BMT 65): 349 mm Distance between centers: 826 mm Bar capacity: max. 76 mm Travel distances: X-axis travel: 239 mm Y-axis travel: +/- 51 mm Z-axis travel: 826 mm Dsdjyzz Urjpfx Anwocg Main spindle: Spindle speed: 3,400 rpm Drive power: 22.4 kW Turret: Number of tool stations: 12 positions Tool holder: BMT 65 Rapid traverse rates: Rapid traverse (x, y, z): 12 / 12 / 24 m/min Technical features & accessories: - Driven tools (C-axis) - Automatic tool presetting arm - Coolant tank - Coolant pump - Chip conveyor - 254 mm chuck - Tailstock Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to alterations and errors in technical details and information, as well as prior sale!

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Dcjdpfot Hw N Hox Anwsg Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Dodsdpak Ropfx Anwecg Probe changer

Condition: new, Year of construction: 2026, 0554 mm Dcjdpfx Ajwyd Tnonwjg 370 mm 2000 mm 280 mm 104 mm 11 kW

Condition: used, max. wheel diameter 180 mm gear width 45 mm max. module 4 min. module 0,5 stroke length max. 0 - 52 mm spindle taper innen MK 4 table diameter 160 mm table bore diameter 75 mm no. of strokes 355 - 630 Hub/min feed range 0,008 - 0,4 mm/Hub dimensions of the machine ca. 2,30 x 1,50 x 2,36 m power capacity 6 kW weight of the machine ca. 2.500 kg Dedpfxotycg Sj Anwecg With rack and pinion unit Change gear set Year of construction: Approx. 1981