Mobile shredding plant

Doppstadt Inventhor Type 6

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min Blodpfx Ajxd T Hcokxsg - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Bodpeuu Upgjfx Akxelg Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Bedoxx N Dgopfx Akxslg Delivery date by arrangement

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. - Supplement at additional cost - Blsdpfx Aksq Suwbsxsg We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Bledjpugwispfx Akxsg Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Year of construction: 2016, Technical details: Blodpfxeudf Eve Akxjg weight: 22 t

Condition: used, operating hours: 16,911 h, Vehicle No.: 407-25 HITACHI ZX 250 LCN-3 Year of manufacture: 2008 Blodpexw Apmsfx Akxeg * 132 kW * Hammer circuit * Quick coupler * Cabin protective grille * Undercarriage approx. 70% Inspection possible at any time during our business hours, test drive by appointment! For export sales, a deposit will be retained and refunded upon receipt of the confirmation of arrival. Company logos or advertising markings on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without guarantee - subject to errors, changes, typographical mistakes and prior sale. Vehicle descriptions explicitly do not constitute guaranteed characteristics. We refer to our General Terms and Conditions, which must be acknowledged.

Condition: good (used), Industrial robots Manufacturer: Kuka Model: KR6, KR6-2, KR6arc Model: KR16L6, KR16L6-2, KR16, KR16-2, KR16-2 S, KR16-2 F Bledpfx Akjtuc U Roxsg All models equipped with KRC2ed05 controller Kuka KR6 KRC2ed05 Year of manufacture 2006 Kuka KR6-2 KRC2ed05 Year of manufacture 2011 Kuka KR6arc KRC2ed05 Year of manufacture 2006-2007 = several units in stock Kuka KR16L6 KRC2ed05 Year of manufacture 2009 Kuka KR16L6-2 KRC2ed05 Year of manufacture 2011 Kuka KR16 KRC2ed05 Year of manufacture 2007-2009 = several units in stock Kuka KR16-2 KRC2ed05 Year of manufacture 2010-2012 = several units in stock Kuka KR16-2 Speed KRC2ed05 Year of manufacture 2012 = several units in stock Kuka KR16-2 Foundry KRC2ed05 Year of manufacture 2012

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Bedpetgqlyjfx Akxelg Rotor diameter approx. 400 mm Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: used, Year of construction: 2017, working width 6 m Number of gangs 5 0 Blsdpjyv Iwcsfx Akxjg Number of folders 2 0 Number of rollers 2 St.