Elumatec 150 profile machining center

Elumatec SBZ 150

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS Travel X-axis: 9,500 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Feed rate X-axis: 70 m/min Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Njdpeycul Sjfx Afzscl Spindle power: 15 kW S1 Milling cutter diameter: max. 100 mm Slitting cutter diameter: max. 100 mm Saw blade diameter: max. 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with spraying EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, slotting, and sawing with stationary profile bar 6-sided machining: optional from the front, possible from below Profile bar protection: machining with stationary profile bar Robust and low-wear direct drives on all axes Axes: 5-axis control for spatial machining Display: 15-inch color screen Interfaces: USB ports, network connection 2-layer machining for pendulum operation Included tools (HSK holders) Two circular saws for aluminum

Condition: good (used), mileage: 889,496 km, power: 412 kW (560.16 HP), first registration: 07/2012, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, second fuel tank, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminium fuel tank - Remote-controlled central locking - High beam - Speed limiter - Intarder - Refrigerator - Air suspension - Air horn Ncjdpfx Aow Il Ubsfzjl - Spare wheel - Sun visor - Stability control - Auxiliary heater (parking heater) - Toolbox - PTO (power take-off) - PTO (power take-off) - Central lubrication system - Towing hitch = Further Information = Axle configuration Suspension: Air suspension Front axle: Steered; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 1: Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Lift axle; Steered; Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 17,372 kg Payload: 8,628 kg Gross vehicle weight: 26,000 kg Functional Crane: HMF 3000 K6 30 tm radio remote, year of manufacture 2012, mounted at rear of chassis CE marking: yes Condition Technical condition: good Optical condition: good Financial information Price: On request Further information Please contact John de Koning or Mark de Koning for more information.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1500050285, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 14, Submitting a bid obligates the buyer to collect the item on time on 23.12.2025! TECHNICAL DETAILS Travel X-axis: 7,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 630 mm Rapid traverse X-axis: 70 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Max. workpiece length: 7,300 mm Ncsdpfx Asxx Uf Njfzjl Max. spindle speed: 24,000 rpm Spindle motor power: 15,000 W Number of spindles: 1 Number of tool magazine slots: 14 Tool diameter: 100 mm MACHINE DETAILS Input voltage: 400 V Type of input current: Alternating current (AC) EQUIPMENT Documentation/manual included Magazine can be equipped with nine standard tools, five special tools, and one saw blade Ten clamping devices Two separate work areas for pendulum operation 15" color display Floppy disk drive DOS operating system

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar EQUIPMENT Nedpexnz Ivofx Afzjcl Automatic tool changer Angle head

Condition: new, Year of construction: 2025, Schiatti Angelo BFP12 Double Edger Nedpfxowd Hbij Afzocl Max. working width: 1.300 - 4.500 mm Processing station with different processing options: 5 / 6 / 8 / 9 / 10 / 11 Spindle - Glasthickness 3-35 mm - min. working width 160 mm - Max. weight: 480 KG - Automatic thickness adjustment via SPS - Tanks for waste water collection - Inkl. turning station

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Ncsdow A Rv Ispfx Afzjl Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm Nedpfxjt Ea Tfe Afzocl - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Nodpfjhrukisx Afzscl Machine in stock - saw blade D 700 mm - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Year of construction: 2003, condition: excellent (used), machine/vehicle number: MBUT136, ! bargain price ! Price from 1150 euros R. Stahl 1-girder suspension crane, bridge crane, crane track, indoor crane, gantry crane Payload 250KG 7 cranes available: Ncjdpfx Afoigl R Rezsl 4: Steel suspension crane NL 250KG, width 6.35m, track width 5.6m 5: Steel suspension crane NL 250KG, width 2.65m, track width 1.9m 6: Steel suspension crane NL 250KG, width 4.85m, track width 4.35m 7: Steel suspension crane NL 250KG, width 2.90m, track width 2.35m 9: Steel suspension crane NL 250KG, width 6.0m, track width 5.5m 10: Steel suspension crane NL 250KG, width 1.03m, track width 0.74m (1150 euros) 11: Steel suspension crane NL 250KG, width 1.65m, track width 1.25m Track width can be changed, end carriers are screwed with 8 screws. Tracks (IPE 200 - not available) Undercarriages can be adjusted to the carrier dimensions. incl. complete control, floor operation by means of a control bottle All cranes can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction 2003 Very good condition, systems were only used for maintenance - hardly used Shipping by courier, collection preferred Location 75053 Gondelsheim Please ask for shipping prices according to zip code, we will make you a non-binding offer immediately!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale glass cutting table by Glaston UC 1000. The machine is in very good technical condition, regularly serviced and ready to work. Ideal for precise cutting of glass of different thicknesses. Ncodpfx Afour U Tyozel