Vertical Turning Machine

EMAG VT 2-4

Condition: repair required (used), Year of construction: 2015, functionality: not functional, machine/vehicle number: 106374, Technical characteristics: Work Area - Chuck diameter: 160 mm - Maximum weight of chuck + workpiece: 45 kg - Maximum workpiece diameter/height: 100/400 mm - Distance spindle nose to origin of tailstock: 795.5 mm - X1/X2 working stroke: 340 mm / Rapid traverse in X: 30 m/min - Z1/Z2 stroke: 625 mm / Rapid traverse in Z: 30 m/min / Feed force: 18.7 kN - Loading time: 5–6 sec - Standard closed automation (number of loading nests by workpiece diameter): 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm) Main Spindle - Spindle according to DIN 55026: Size KK5 - Maximum speed: 8,500 rpm - Power at 100% / 40% duty cycle: 34 / 26.5 kW - Torque at 100% / 40% duty cycle: 75 / 48 Nm Tailstock - Interface: MK3 - Clamping force: 120 N/bar - Clamping stroke: 5 mm Tool Holder with Motorized Tools - Tool holders with cylindrical shank according to DIN 69880: 12 – BMT65 - Number of positions: 2 x 12 (1 gripper per turret) Bdsdpfx Abexxtkwe Uja - Maximum speed: 6,000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400–480 V, 120 A - Connected load: 45 kVA Dimensions - Total dimensions: Length = 5,300 mm with chip conveyor, Width = 1,760 mm, Height = 3,650 mm - Weight: 7,500 kg Main Features and Capabilities - Vertical design: Optimized chip evacuation and automatic loading/unloading - Control: GE Fanuc FS 32i - High precision: Positioning accuracy on X and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automation: EMAG O-type – Parts are loaded and unloaded automatically via integrated automation - Live tools: Allows drilling and milling operations - Tool life monitoring with sister tool management - Chip conveyor, coolant unit, switchable dual cartridge filter, high pressure pump (15 bar) - Fully enclosed working area, LED light in working area - Documentation: Available both electronically and as hardcopy book Machine Status: NOT WORKING - X-axis drive - Five electrical switches (Siemens) - Hydraulic pump - Operator panel (in stock, needs installation) - Valve chiller - Pressure switch for oiling unit - Emulsion tank pump - Four emulsion circuit switches (electrovalves) - Pressure switch for hydraulic circuit - Complete hydraulic block

Condition: ready for operation (used), Year of construction: 2014, operating hours: 27,608 h, controller manufacturer: SIEMENS, This 5-axis DMG MORI CTX beta 800 TC was manufactured in 2014. It features a main spindle speed of 5,000 RPM and a sub spindle speed of 6,000 RPM, along with a 30-piece tool magazine. Ideal for complex turn-mill operations, consider the opportunity to buy this DMG MORI CTX beta 800 TC turn-mill centre. Contact us for further details regarding this machine. • Tools: 30 pcs • Incl tools shown on the pictures • Excl barfeeder Bdedpfox U D Hqox Ab Uja

Condition: used, Year of construction: 2003, turning diameter 190 mm Bdedsxiy Aujpfx Ab Uja turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5350X3350x2395 m

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Bjdpfx Aeg Ix Hmeb Ujda

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control Bdjdpfx Abevygwwo Uea tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. Bjdjlbgfcspfx Ab Uoda WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Chip conveyor High-pressure pump Bdedpfsyf Dtqox Ab Usa Parts catcher Bar feeder interface Tooling

Condition: used, Year of construction: 2013, Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 6 Drilling head 36/1000-HSK: HSK 40 2 CNC X-Y-Z turning device outside the collet disc: NC 26/100 pick-up unit; 2 deburring spindles 1 CNC horizontal cross slide 26100-HSK: X/Y stroke 1 CNC feed unit VE 36/100-HSK internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 2 CNC turning unit 50/100-PSK: with ES-PDK-12 facing head (slide-in 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW 1 turning unit WDE 30/60 1 turning tube with insertion bar 3 chip breaker valve SBV-100 Tool monitoring Please, contact us for getting more information and pictures on mail(at) or * Bsdpfx Aoruvaqeb Uoda

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Bdsdpfxsyh I Tdj Ab Uja Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Tool turret - slots: 80 Pl.

Condition: used, Year of construction: 1995, grinding diameter 350 mm Bdsdpfx Asyatx Sjb Usa grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem