Lead/traction spindle lathe
Emco EMCOMAT-17 D

Name: Emco EMCOMAT-17 D
Brand: Emco
Price: 14500 EUR
Availability: InStock

ONO plus VAT

€14,500

Condition

Used

Location

Ubstadt-Weiher Germany

Lead/traction spindle lathe Emco EMCOMAT-17 D

Show map

Machine data

Machine type:: Lead/traction spindle lathe

Manufacturer:: Emco

Model:: EMCOMAT-17 D

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

ONO plus VAT

€14,500

Location:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Call

Details about the offer

Listing ID:: A19447966

Update:: 27.06.2025

Description

Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!!

Technical Data:

>> Year of manufacture: approx. 2000
>> Machine no.: D3F H1 010
>> Centre height: 170 mm
>> Swing over bed: 340 mm
>> Swing over cross slide: 190 mm
>> Turning length: 700 mm
>> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm
>> Tailstock quill stroke: 120 mm
>> Tailstock: MT3
Iodpfx Ajwvuf Tjb Tjap
>> Spindle bore: 50 mm
>> 20 longitudinal feeds: 0.045 – 0.787 mm/rev
>> 20 cross feeds: 0.023 – 0.406 mm/rev
>> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters
>> Weight: approx. 730 kg

Equipment and Accessories:
>> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual
Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching
>> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws
>> Multifix B toolholder with 2 tool pockets
>> Chip guard
>> Coolant system

About the machine:

Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2007

89 listings online

Call

Send inquiry

Telephone & Fax

+49 7251 ... show

Fax:

These listings may also fit your interest.

Listing

Mindelheim

8,079 km

Guidance and lathe
EmcoEmcomat 17 D

Call

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Iaodpsdctnbefx Ab Top Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

See details

Listing

Milling machine harich Modell B stufenlos (Deckel FP 2, überholt mit CE)

Feucht

8,032 km

Milling machine
harich Modell B stufenlos(Deckel FP 2, überholt mit CE)

Call

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system Iasdpovfdatsfx Ab Tsp - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

See details

Listing

Semi-automatic double blade cold circular saw Eisele VMS 370

Fuldatal

7,804 km

Semi-automatic double blade cold circular saw
EiseleVMS 370

Call

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Isdpfxokfp D Tj Ab Toap Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

See details

Listing

Germany

7,640 km

Center Lathe
EMCOEmcomat 17/20

Call

Listing

Universal Tool Room Milling Machine Emco FB-4

Heilbronn

7,927 km

Universal Tool Room Milling Machine
EmcoFB-4

Call

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle Iodpjwyit Hofx Ab Tsap quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

See details

Listing

Tool Room Milling Machine - Universal DECKEL FP 4 A

Bühl

7,895 km

Tool Room Milling Machine - Universal
DECKELFP 4 A

Call

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm Ijdpfetqqlljx Ab Tjap total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

See details

Listing

Friesenheim

7,898 km

L-u Z lathe
WeilerPraktikant VCD

Call

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Isdex I Rtkjpfx Ab Tsap Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

See details

Listing

Wetzlar

7,795 km

Milling machine
CONTURMHA-5

Call

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (angled table): 900 x 500 mm Max. Workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg Iodpfjhu Rwfex Ab Tjap including extensive standard accessories, e.g: Work area cladding 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle Tool holder SK 40, DIN 69871A, tightening bolt DIN 69872, incl. hydraulic unit Monitored spindle protection 3 conventional handwheels Complete electrical equipment for three-phase current 400 V, 50 Hz Ball screws for X, Y and Z axes Vertical milling head Fixed angle table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guideways guideways Automatic central lubrication for the axis and ball screws Coolant system with pump Set (4 pcs.) of bearing elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

See details

Listing

Production press Stenhof STENHOJ LPSP 100T

Wilfersdorf

8,449 km

Production press Stenhof
STENHOJLPSP 100T

€35,000

ONO plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. Iajdpfx Ajg Rn Efeb Tsp All statements without guarantee. Without transport costs.

See details

Listing