EMCO Hyperturn 665MC Plus

EMCO Hyperturn 665MC Plus

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Bwsdpjyxxhqofx Akxel

Year of construction: 2004, condition: ready for operation (used), X-axis: 750mm, y-axis: 600mm, z-axis: 520mm, C-axis: 360°, B-axis: 180°, max. spindle speed: 18,000/min, control: Siemens SINUMERIK 840D powerline, connected load: 55kVA, length: 4603mm, width: 5250mm, height: 2785mm, weight: approx. 9t, operating hours power on: approx. 65,000h, spindle hours: approx. 19,000h. No defects known, internally maintained, without maintenance reports, with documentation, rotary table, high-pressure internal cooling and Bluhm spindle probe. An inspection on site is possible. Bsdpfxjylbq He Akxswl

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Bedpfx Ajxzq Ncekxowl Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 Bwodpfxeyx U Hij Akxsl of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation

Condition: used, Year of construction: 2013, A 4-axis CNC machining center Spinner is available. Travel X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10000rpm, power: 22kW, tool holder: SK40, tool positions: 24, weight: approx. 8000kg. Documentation available. On-site inspection is possible. Bodjwqd R Uopfx Akxswl

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Bsdpfxoy Amflo Akxjwl

Condition: good (used), Year of construction: 2008, functionality: fully functional, CNC Lathe Weiler DZ 45 Year of manufacture: 2008 Control: Siemens 840D / Shopturn Manual loading up to Ø 220 mm Bar capacity: 42 mm Maximum turning length: 450 mm Spindle speed: 6300 rpm Machining 16-station turret for driven tools X/Z/Y/C axes Bodpfx Ajyayc Dskxswl Collet chuck

Condition: used, Year of construction: 2012, Feeler NBP 1300A Year of manufacture 2012 X-axis travel 1300 mm Y-axis travel 610 mm Z-axis travel 600 mm Table 1500x600 mm Spindle 12,000 rpm BT40 Spindle coolant Bwodjww Indjpfx Akxol Heidenhain TNC 530 control

Condition: excellent (used), Year of construction: 2006, CNC Machining Center Hedelius T8 – 3200 Magnum Control: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 1 Travel ranges: X-axis F/B: 3,220 / 2,600 mm Y-axis: 800 mm + 65 mm Z-axis F/B: 850 / 1,000 mm Pendulum operation F/B: 2 x 1,300 mm Clamping surface: 3,800 x 800 mm Taper: SK 40 Tool magazine: 98 stations Spindle speed: 50 - 12,000 rpm Enlarged machine table Equipment: - Internal coolant supply (IKZ) 20 bar - Band filter coolant system 780 l - 3D wireless probing system Renishaw RMP 60 Bsdeyk Avzepfx Akxjwl - Chip conveyor - Rinse gun - Electrostatic exhaust air filter - Electronic handwheel HR 410/3+ - Partition - 2x LTA extraction units - Prepared for 5th axis

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle Bsdpfx Akox Dci Toxewl 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Available immediately.