HYDRAULIC PRESS

EXNER

Condition: excellent (used), Year of construction: 1966, Exner 200 Pressure: 200 t Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between columns: 420 mm Hydraulic four-column press for embossing, upsetting, flow forming, calibrating, and punching Type H4SP 200 S 1101-3 Year of manufacture: 1966 _____ Downward pressure capacity: approx. 200 tons Upward retraction force: approx. 20 tons Gkedpfx Aljz N Tf Ue Uec Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns at the front: 420 mm Laterally: 220 mm Installation height, table to ram (top): 380 mm Ram stroke: approx. 200 mm Piston / column diameter: 270/120 mm Piston bore: 50 mm Closing speed of the ram: - Rapid traverse / working stroke / ram at 330/10/180 mm/s Total power consumption: approx. 15 kW - 380 V - 50 Hz Weight: approx. 3,000 kg Machine dimensions: approx. 1.4 x 1.3 x approx. 2.75 m Accessories / special equipment: Sick light curtain

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Godpfx Aov Rwu Ujl Uekc Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: used, Year of construction: 1970, functionality: fully functional, pressing force: 100 t, overall weight: 4,000 kg, pressure 40 t Gjdpfevxltbsx Al Uekc stroke 150 mm serial number 100091 2 Druck & Hub verstellbar pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 60 t, table width: 850 mm, table length: 570 mm, total width: 1,265 mm, overall weight: 5,500 kg, C-frame eccentric press 60 t. NEW Press force: 60 t Rated capacity point: 4 mm Max. closed die height: 310 mm Stroke adjustment (semi-automatic): 20/100 mm Speed: 60 SPM Gkedoxtpltspfx Al Uec Die fastening hole diameter: 50 mm Throat depth (centre of hole to back): 275 mm Ram stroke adjustment: 80 mm Ram dimensions: 580 x 350 mm Table dimensions: 850 x 570 mm Table hole diameter: 150 mm Table height above floor: 795 mm Weight approx. 5,000 kg Height: 2,430 mm Depth: 1,370 mm Width: 1,265 mm Motor: 5.5 kW

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any Gkjdpfop E Eglox Al Uoc work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: new, Year of construction: 2024, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, installation height: 400 mm, Equipment: safety light barrier, EXNER hydraulic double column press EX SLL 40 new machines year of construction 2024 pressing force: 400 kN Installation height: 400/450 mm Gsdpfx Ajuv Hm Iol Uskc stroke: 250 mm Table (width) 700 mm Table (depth) 450 mm

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 160 t, stroke length: 300 mm, table width: 1,250 mm, table length: 800 mm, installation height: 500 mm, EXNER EX SL 160 double column press Gkjdpeuw S A Defx Al Uec NEW Machine is under construction Pressing force 1600 kN Installation height: 500 mm stroke: 300 mm Table width: 1250 mm Table depth: 800 mm mech. depth stop

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Gedpfxsk Hz Iwe Al Uekc Spindle speed: 4500 rpm Coolant system and chip conveyor

Condition: new, Year of construction: 2026, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, EXNER hydraulic single-column press – NEW, EEX SL 40 series – new machine Pressing force: 400 kN Gkedjt D Ah Aspfx Al Usc Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 400 mm Stroke: 250 mm Table dimensions: 700 x 450 mm

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 80 t, stroke length: 300 mm, table width: 800 mm, table length: 600 mm, throat depth: 330 mm, EXNER hydraulic single-column press, NEW, EEX SL 80 series Pressing force: 800 kN Mechanical depth stop Control system: Siemens S7 - 1500 Installation height: 450 mm Stroke: 300 mm Gkjdpfx Aozcwrnjl Usc Table dimensions: 800 x 600 mm

Year of construction: 2018, condition: new, machine/vehicle number: DMPMFG200x200, Magnetic filter grid in housing / cabinet construction V2A quality (for free-fall applications to investigate dry and free-flowing bulk solids) Godpfx Aodtdwajl Uokc Magnetic grid 200x200mm High-quality cabinet construction completely closed Easy cleaning by pulling out the magnetic cores High quality magnetic filter rods completely closed Magnet NdFeB N45, Br 8500 Gauss Tmax 80 ° C 4x M10 threaded rod incl. Wing nut as clamping unit Guide rod center: Entrance level right Outlet below

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 40 t, stroke length: 250 mm, table width: 700 mm, table length: 450 mm, throat depth: 230 mm, installation height: 400 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Stroke: 250 mm Table (width): 700 mm Gkodpfx Aew Nx Nhsl Usc Table (depth): 450 mm Throat depth: 230 mm

Condition: used, Year of construction: 1972, Press force: 150 t Stroke: 180 mm Frame width: 300 mm Side frame opening: 180 mm Shut height (stroke up): 300 mm Table area: 570 x 410 mm Gkedpfxszymlqo Al Uoc Table height above floor: 875 mm Ram area: 180 mm Downstroke speed: 250 mm/s Upstroke speed: 160 mm/s

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs Gsdey Sf Azepfx Al Uekc

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. Gkodpozxz Spefx Al Uoc - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters