Tryout Press - hydraulic

FALKEN DPM 1070-100

Condition: new, Year of construction: 2026, pressure 100 t stroke 300 mm table surface area 1070 x 315 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1870 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual Ljdpfx Afoxaar Djzjrg

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Ljdpfx Aeulaxhjfzerg

Condition: new, bore capacity in steel (diameter) 20 mm throat 180 mm bore stroke 82 mm Ljdpfxoupxkdo Afzsrg turning speeds 220 - 2840 U/min 290 x 290 mm total power requirement 0,55/0,75 kW / Volt weight of the machine ca. 54 Kg dimensions 820 x 500 x 290 mm CE-tested spindle hood. Keyless chuck (1 to 16 mm) Tilting work table. Depth stop.

Condition: new, messurements (LxWxH): 1.630 x 700 x 1.200weight approx.: 480total power requirements: 1,1prebending: 2sheet thickness: 3sheet length: 1050 Lrsdpfx Aed Eqqqjfzeg

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm working width, ideal for heavy-duty mulching tasks! The Brugger FMP 225 is a robust forestry mulcher designed for agricultural, forestry, and fallow land applications. Featuring a double belt drive, 36 tungsten-carbide-tipped hammers, and hydraulic equipment, it is ideally suited for tractors from 110 hp – reliable, powerful, and built for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Double belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 hp Weight: approx. 1,800 kg Mounting: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with hammers) Hammers: 36 pieces, tungsten-carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-stage adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for tailgate, 1x for pressure roller) Equipment: Hydraulic rear flap & pressure roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = €10,900 Brugger FMP200 200cm – 32 hammers, 1,700kg = €11,900 Brugger FMP225 225cm – 36 hammers, 1,800kg = €12,900 Lsdpewhyw Esfx Afzorg ----- Contact us for a tailored quote!

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm Max. working area: 1010 x 300 mm Piston stroke: 400 mm Lsdpfx Afek Nz N Ejzorg Advance speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Features: - Side-shifting cylinder - Generous working area - Height-adjustable table - Torsion-resistant design with welded steel construction - Pressure gauge - Fine pressure adjustment - Additional hand pump Support prisms available at extra cost.

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Ljdpscirniefx Afzsrg Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 2025, total height: 2,100 mm, total width: 800 mm, total length: 2,200 mm, Empty weight: 1.145 kg Price: On request - Year: 2025 - Documentation available: No - CE marking present: Yes - CE certificate present: Yes - Serial number: PPW10061N2025009 - Control: Conventional - Motor power: 3.0kW - Table width: 300mm - Throat depth: 1500mm - Table length: 1500mm - Ram width: 120mm - Ram length: 120mm - Model: Hydraulic - Max. stroke: 380mm - Number of columns: 2 - Height adjustment: 750mm - Power: 100.0ton - Transport dimensions: 2200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 1145kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Ljdpfx Ajxb Scwjfzsrg

Condition: used, Year of construction: 2013, operating hours: 8,500 h, power: 110 kW (149.56 HP), front tire size: 480/70R30, rear tire size: 580/70R42, Equipment: compressed air brake, front power take-off, 1551 AutoPow r 40 km/h,stepless & / 2058 ComfortView cab with cab suspension / / 2123 Comfort seat with / low-frequency air suspension, automatic / 2511 2 telescopic exterior mirrors, mechanical / extendable / 2567 with air conditioning and lifting roof Lrsdpfju A Igcjx Afzjg

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ Lsdpfx Afsi A S I Dezorg work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.