Drill with magnet

Fein PS 50 R

Condition: new, The new vacuum pump is available from stock and ready for immediate use. We recommend that it is only installed by trained personnel. Adaptation material available on request. Isdpfxjttzxrj Aaastp Oil filling: without Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: new, mileage: 5 km, power: 117 kW (159.08 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,350 mm, emission class: euro6, color: white, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Mercedes Benz Sprinter box body with trailer as a through-loading train. Other dimensions are also possible! New vehicle: * GVW. 3,500 kg. * EURO 6 D-TEMP * ZV with FFB * radio * Electr. adjustable windows * Electrically adjustable exterior mirrors * Trailer coupling * Roof spoiler * Side spoiler Towing vehicle body: * Sandwich body white * L x W x H = 420 x 210 x 235 cm. * Outer walls 23 mm. * Roof 25 mm. * Payload approx. 800 kg. * Lashing rails 1x per side * Aluminum step protection 160 mm. high * Interior lighting incl. switch * Double wing door at the rear * Floor multiplex plate * DHollandia tail lift, maintenance-free, 750 kg. Load capacity, with mechanical supports * Usable platform area approx. 215 x 160 cm. * Aluminum design, 2 lifting and 2 lowering cylinders * Top flap with gas pressure springs Trailer with box body: * Through-loading trailer with braked lifting platform * Interior dimensions: L x W x H = 420 x 210 x 235 cm. * Outer walls 23 mm. * Payload approx. 1,950 kg. * Loading height approx. 95 cm. * Lashing rails 1x per side * Interior lighting with switch * Floor multiplex plate * 14 inch tires * Subframe welded and hot-dip galvanized * Stainless steel door hinges * Nato plug with charging cable for external battery in trailer * Stainless steel espagnolette lock * Body weight with tail lift approx. 1,500 kg * Chassis frame hot-dip galvanized * GFK top layer instead of steel top layer * 12 volt lighting system, 7-pin plug * Tail lift DHollandia 750 kg. Load capacity * Usable platform area approx. 215 cm x 160 cm. Aluminum * Top flap with gas pressure springs * Double wing doors at the front of the trailer * External espagnolette locks Lockable Load securing is also available from us: * Tensioning and lashing straps * Locking beams * Warning vests * Transport boxes * Edge protectors * Dunnage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size and type on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Ijdpsr S Sg Hefx Aaajtp Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: used, Year of construction: 2023, Exact harrow 3000-125 Adjustable harrow attachment set Additional / electronic track marker 3000 AmaDrill 2 for Cataya Radar sensor / international Analog working position sensor Electric tramline control / control valve and hydraulic throttle Iodpfetgpggex Aaaetp

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Iedpfxjg S Ui Aj Aaajtp

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Tool holder, square: 1/2" electrical connection: 220 V, 280 W weight: 3,3 kg Isdpfsby Np Ejx Aaajtp

Condition: new, Optimum OPTIdrill DM 50V magnetic core drilling machine High-quality machine with infinitely variable speed control and maximum functionality. Itsdpfet Ifidsx Aaaep TECHNICAL DATA Dimensions and weights Length (product) approx. 250mm Width/depth (product) approx. 220mm Height (product) approx. 300 - 470mm Weight (net) approx. 11kg Drive power Input power 1.7kW Mounting Spindle holder fixed Drill holder Weldon 3/4 " Speed range Speed(s) at idle (clockwise rotation)100 - 810 min¯¹ Infinitely variable speed control Electrical data Supply voltage 230V Mains frequency 50Hz Standards and approvals EMC class C2 Standard DIN EN 55011 Protection class IP 42 Magnet Magnet holding force 15.6kN Magnetic base length 166mm Magnetic base width 80mm Core drill Max. core drill diameter with manual feed 50mm Drilling depth max. core drilling with manual feed 50mm Solid drill Drill diameter max. solid drill directly mounted 13mm SCOPE OF DELIVERY Carrying case Operating tool Safety belt Quick-change chuck EQUIPMENT Vario drive ✔ Manual quill feed

Condition: good (used), Code: 0046 Brand: KUPFERMUEHLE - GERMANY Model: DOIN - VUIN 605 2-shaft planing machine + multi rip saw for wood carpentry, wood beams, roofing, sawmill, coffins and various Technical data: Heavy cast iron structure Working width mm 605 Min/max working height mm 3/200 Min workpiece length mm 350 Automatic group lifting with possibility of manual adjustment Feed speed mt/min 7 - 9 - 11,5 - 14 - 18 - 23 Infeed table with 3 support guides and motorized top feed rollers Height adjustable guide saw unit - Motor Hp 2,5 - Blade diameter mm 180 - Suction port mm 120 Itjdpfx Aaov D N Efoaop Motorized towing roller on the table 1° shaft surface planer with 4 knives - Motor Hp 7,5 - Suction port mm 120 2° shaft thickness planer with 4 knives - Motor Hp 12 - Suction port mm 160 - Motorized towing roller on the table 3° Multiblade saw shaft - Motor Hp 40 - Blade diameter mm 230 - Cutting height mm 50 - Upper suction port mm 160 - Lower suction port mm 160 N° 2 upper motorized towing rollers and N°1 lower roller Control panel Overall dimensions mm 3300 x 1650 x 1600 h Weight kg 4000

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm Iodpfx Aefv Attoaaotp weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 280 mm, spindle bore: 58 mm, turning diameter over bed slide: 470 mm, center height: 235 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,150 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,800 kg, quill mount: MK 4, Tip height: 235 mm Center distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Features include Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Itsdpfx Ascirnieaaop Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 2019, operating hours: 3,868 h, front tire size: 540/65R24, rear tire size: 600/65R38, AUTOPOWR / IVT - 40 KM/H / AUTOTRAC READY / GEN 4 COMMAND CENTER / AUTOTRAC / JDLINK-CAPABLE / PREMIUM SEAT / HYDRAULIC PUMP - 114 L/MIN / 3 ELECTRONIC SCV 450SER CONTROL UNITS / MFWD FA- TLS WITHOUT BRAKES / 2-POSIT. STEEL RIMS FRONT / FRONT Iodpfxjulaxhj Aaajtp