Injection molding machine

FERROMATIK MILACRON MM 800

Condition: good (used), Year of construction: 2011, Krauss Maffei KM 850-12000 MX injection molding machine With Krauss Maffei robot Year of manufacture - 2011 Hydraulic-mechanical double-plate clamping system with 4 pressure pads and 4 locking units on the moving plate. PV - adjustment of the injection unit. MC 5 control system with color monitor, integrated control panel and USB data storage. Plasticizing system Rodpfxjtrya Rs Abwsu Complete plasticizing system for thermoplastics with a screw diameter of 135 mm, with reverse lock and open nozzle. Nozzle radius 25 mm, nozzle opening 9 mm TECHNICAL DATA Closing unit - mold closing force: kN 8500 - mold opening force: kN 560 - clamping plate dimensions (h x v): mm 1600 x 1600 - clearance between columns (h x v): mm 1140 x 1140 - mold opening path: mm 1600 - mold height (min-max.): mm 500 - 1100 - opening width: mm 2100 - ejector stroke: mm 300 - ejector force: kN 200/ 100 Injection unit - screw diameter: mm 135 - injection pressure: bar 1389 - injection volume: cm3 8588 - injection size for PS: g 6098 - injection capacity: cm3/s 1414 Electro-hydraulic equipment - rated power of pump motor: kW 132 - dry cycle time according to Euromap 6: 1/h 965 - oil tank capacity: l 2440 Weight and dimensions - net weight with control cabinet: t 49 - dimensions of foundation space (L x W x H): m 11.72 x 2.92 x 2.71

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Rsdpfx Abeu Ttf Nswsu Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Reifenhäuser extruder Type: RH 51-1-35-25 5.6 kW DC motor 103 rpm 500 bar melt pressure sensor 3 zone screw 35-25d Rsdpfxswxvado Abwsu fully functional You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: good (used), functionality: fully functional, pressing force: 300 t, total length: 1,200 mm, total width: 2,800 mm, total height: 3,500 mm, ID105830 Hydraulic press Brand: Van De Graaf Type: HVK-300 Rodpswhc H Aefx Abweu Capacity: 300 tons

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Rsdpfxoub S R Hs Abwou Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Rsdpowut Hyofx Abweu

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Redpfx Ajubyrxsbwju Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, Used Stork IMM 12000-19000 injection molding machine. Rsdpfx Aewhkfyjbweu

Condition: excellent (used), Year of construction: 1999, operating hours: 86,200 h, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 150 mm, column diameter: 230 mm, displacement volume: 10,955 cm³, injection pressure: 1,330 bar, ejector force: 215 N, ejector stroke: 300 mm, opening stroke: 1,800 mm, plate width: 1,400 mm, plate height: 1,150 mm, overall weight: 77,000 kg, heating capacity: 113 kW (153.64 HP), Equipment: documentation/manual, This injection molding machine, manufactured in 1999, features a robust design, weighing 53 tons and a clamping force of 11,000 kN. It is equipped with a hydraulic clamp, M24 clamping threads, an ENGEL robot for automation, and a pivoting mechanism offering great versatility, making it ideal for efficient large-scale production. Please contact us for more information on this ENGEL 1100 T injection molding machine. Rsdpfxewdulio Abwju - The material feed hopper can be provided free of charge with the machine. - Linear Engel robot + robot cell

Condition: good (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, clamping force: 12,000 kN, screw diameter: 110 mm, injection weight: 4,410 g, For Sale: Haitian JU12000II/8400 PLUS Injection Molding Machine – 1200 Ton (2018) We are offering a Haitian JU12000II/8400 PLUS, 1200 ton injection molding machine from 2018, in very good condition. ✅ Low production hours ✅ Used exclusively for PP material ✅ Well maintained ✅ Available immediately The machine is currently installed and can be inspected at our facility in Leipheim, Germany. Disconnection and shipment can be arranged without delay. Due to changes in our production footprint, this machine needs to be sold quickly, creating a unique opportunity for buyers interested in a modern, large-tonnage Haitian machine at highly attractive terms. Additional machines available – package purchase preferred: We are also selling: - 1× Haitian JU13000II/8400H – 1300 ton (2018) - 1× Haitian JU12000II/8400 – 1200 ton (2017) - 2× 900 ton Haitian injection molding machines - 1× smaller Arburg injection molding machine Rsdpfx Ajy Iv Ruebwou 👉 Strong preference for package deals – significant price advantages possible when purchasing multiple machines. Key specifications (1200 ton PLUS machine): Manufacturer: Haitian Model: JU12000II/8400 PLUS Clamping force: 1200 ton Year of construction: 2018 Material processed: PP only Condition: Excellent / low usage hours Location: Leipheim, Germany Availability: Immediate 📩 Contact us for pricing, full technical documentation, or to schedule an on-site inspection. Machines are competitively priced for quick sale and available on a first-come, first-served basis.