Injection Moulding Machine

Ferromatik K-Tec 85

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Iedpfxju Ti Sro Abveic Control unit: MC4 Screen text language: German (cannot be changed to other languages) Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: like new (used), Year of construction: 2016, operating hours: 390 h, functionality: fully functional, type of input current: three-phase, overall weight: 827 kg, Carrier water chiller Model: 30RBS-140B0181-ME, year 2016, R410A. 135 kW (116,100 frigories), cooling only, maximum consumption: 61 kW. Dimensions: 2258x2050x1330 mm, plate heat exchanger, weight: 827 kg. Machines fully tested in our warehouse with gas, inspection possible. Reference: 1137. Iodpfx Aoyfwuzjbveic

Condition: good (used), Year of construction: 2001, Ref. no.: 18587 Manufacturer: FERROMATIK MILACRON Type: K-TEC -200 -1000 S Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 441 cm³ Shot weight: 395 g Injection pressure: 2268 bar Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg Further information: FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall Production The FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications. One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especially for thin-wall applications. The K-TEC series is especially preferred for: • Thin-wall packaging products • Technical parts with fine surface details • Lid and container production Iiodpfxjw Hc Spo Abvsc • High-flow applications • High-speed serial production processes Advantages of the nitrogen-supported system: • Extremely fast injection performance • More stable pressure control • Better reproduction of fine details • Improved filling of thin-wall products • Shorter cycle times • High process stability The K-TEC series is also known for: • High repeatability • Sensitive mould protection • Low cycle times • Long-lasting mechanical construction • Suitability for heavy industrial operating conditions The machine was actively running in production until it was removed from operation and was working without problems until the very end. Especially for manufacturers of thin-wall products, this machine still represents a powerful and professional production solution.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 52 kW (70.70 HP), type of input current: three-phase, type of cooling: air, overall weight: 740 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,800 mm, total height: 1,900 mm, warranty duration: 6 months, Aircooled chiller Climaveneta NX K 0202P 52 kW Cooling capacity: 52 kW / 14.79 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP112KCE-TFD-455 (scroll) Type of refrigerant: R410a Iedpfxoy I Tndj Abvsic Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA DWC-V 300/1, expansion vessel, buffer tank 90 l. Dimensions: 1.8x1.2x1.9 m. Weight: 740 kg. Working hours: 49/49 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Isdpfoy Dipcjx Abvoic

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: CYT301-BIO - 2200416573, cooling capacity: 59.6 kW (81.03 HP), type of input current: three-phase, type of cooling: water, overall weight: 750 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 3 bar, temperature: 7 °C, volume flow: 10.2 m³/h, pump pressure: 1.68 bar, total width: 1,112 mm, total length: 2,470 mm, total height: 1,595 mm, warranty duration: 12 months, Equipment: type plate available, Process Chiller / Air-Cooled Chiller Unit, Type: CYGNUS TECH CYT 301-BIO – 59.6 kW Chillers, MTA S.p.A. CYGNUS TECH CYT 301-BIO are compact water chillers designed for outdoor installation, suitable for ambient intake temperatures down to -20°C. Includes crankcase heater, buffer tank, Iedpfxjy Dcx Dj Abvjic and integrated P1 circulation pump. --Optimized for Biogas Cooling-- Cooling capacity kW: 59.6 Chilled water temperature outlet / inlet: 7 / 12°C Flow rate m³/h: 10.2 Available head pressure bar: 1.68 Ambient temperature °C: 32 Refrigerant: R 410A Electrical Data: Voltage V: 400, Frequency Hz: 50, Phases: 3 Max. power consumption (kW): 30.5 Max. current (A): 51 Starting current circuit (A): 159 Protection rating: IPX4 Dimensions: Length mm: 2470, Width mm: 1112, Height mm: 1595 Weight kg: 750 Connection: R 2" Serial No.: 2200416573 Year of manufacture: 2024 Condition: Visual 1, Technical 1 (in-stock machine) Price: on request in EUR (plus VAT ex works Nettetal) (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2018, 3 x injection moulding machines Stork Machine type Commissioning Age in months Ijdpfx Abex Uymaovjic 4400-2150 19.12.2002 278 4400-2150 28.11.2012 159 6600-5650 01.11.2011 171

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive Iodpfoxwva Ejx Abveic An inspection can be arranged at any time by appointment.

Year of construction: 1991, condition: ready for operation (used), Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible. Iiedpfowbpzaox Abvsc

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,000 h, clamping force: 2,250 kN, screw diameter: 55 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 9,900 kg, product length (max.): 6,400 mm, This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 610 x 560 mm • Platen dimensions (H x V): 880 x 830 mm • Mold opening stroke: 550 mm • Max. distance between platens: 1230 mm • Mold height (min–max): 250–680 mm Isdpfx Aboy Ifctsveic • Ejection force: 49 kN (5.0 tf) • Ejection stroke: 130 mm • Injection unit code: 18 • Screw diameter: 45 / 50 / 55 mm • Max. injection capacity: 318 / 392 / 475 cm³ • Injection weight (PS): 292 / 361 / 437 g • Injection weight (PE): 232 / 286 / 346 g • Max. injection pressure: 247 / 200 / 165 MPa • Max. holding pressure: 247 / 200 / 165 MPa • Nozzle support force: 29.4 kN (3.0 tf) • Main breaker capacity (STD/High Torque): 125 A • Main breaker capacity (High Speed): 175 A • Transformer (STD): 75 kVA • Heating power: 15.2 / 16 kW