SEMI-AUTOMATIC BORING MACHINE

GRIGGIO Alfa 27

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Lrsdpsd Szf Nefx Ad Aei Optionally with length measuring system or automatic positioning system. Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: new, 88 degree standard press brake punch H120mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Lrodpfeiiq H Dsx Ad Aei

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay Ledpfx Asunwk Ted Ajri • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning and training optionally available.

Condition: new, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm Lsdpeb U Hwpefx Ad Ajri total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected load 380V 1,84kW Ljdjh U Damopfx Ad Aori speed 2840 rpm number of spindles: 21 pieces, pitch 32 mm spindle distance 640 mm spindle rotation direction 11xright 10xleft M10 thread 2x safety clamps pneumatic foot valve table size 880 x 400 mm 1x side stop with 2 folding stops 1x basic fence 1x miter fence Unfortunately, we cannot answer inquiries without complete contact information.

Condition: like new (used), functionality: fully functional, power: 7 kW (9.52 HP), saw blade diameter: 305 mm, total length: 3,100 mm, total width: 3,100 mm, overall weight: 3,000 kg, cutting length (max.): 3,100 mm, cutting height with scoring (max.): 70 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, space requirement length: 3,100 mm, space requirement width: 3,100 mm, Equipment: rotational speed infinitely variable, scorer, Panel Sizing System SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a high-performance, electronically controlled panel saw designed for precise, efficient, and automated cutting of wood-based materials. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Key Technical Data & Equipment: - Rip saw FM 20-3100 with hardened guides - Automatic forward & return travel of the saw unit (automatic lowering during return) - Feed drive via three-phase gear motor, frequency inverter controlled - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Score saw blade adjustable externally (without opening the hood) - Safety hood locking with lamella curtain SZ 5008 - 3-step cutting height adjustment LA 4143 - 6 cut-out sections in the pressure beam for residual cuts down to 5 mm - Saw motor: 7.0 kW | Scoring motor: 1.1 kW (switchable) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angle pressure device WP 5003 with clamping claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack-and-pinion guidance - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return: 40 m/min - 6 clamping fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed Pertinax surface in the area of the angle fence Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard disk, parallel & serial interfaces - Network capable (LAN/WLAN), remote maintenance via internet (TeamViewer, Remote Desktop) - USB printing function - Multilingual dialog programming - 15" flat screen, multifunction keyboard on a swiveling control console Ledpfowrn Efex Ad Aori - Graphic display of cutting plans and processes Software / Programs: - OPTIMAX: Office optimization, waste calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette or online (optional) - Manual, automatic & special operation modes (e.g. grooving, veneered parts) Additional Equipment: - Angle fence table HP 5085: 1,720 x 800 mm | Pertinax overlay - Workpiece support table HP 5025: 1,720 x 800 mm | Pertinax overlay - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, tapered Reliability in Continuous Operation: This machine is in use worldwide – under extreme conditions. Whether in the dry climate of Africa or in high humidity regions of Southeast Asia (e.g. Thailand): The PA 4136 runs reliably in 3-shift operations – 365 days a year – and stands out for its outstanding stability and durability. Warranty: We are so convinced of the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electronic supply parts and wear parts.) 📞 Contact us for an individual offer or to arrange a viewing appointment. Machine available from stock. Delivery, commissioning, and training available upon request.

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Lsdpfx Asvx Aqdjd Aori Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm Lrodpfeuzkwzox Ad Asi weight: 900kg

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, SELECT 20800 step milling machine for recessing treads and risers into stair stringers and posts. The machine features stops for tread length, tread thickness, riser length, riser thickness, and projection dimension. In a single clamping, one tread and one riser can be milled in approximately 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Voltage: 3-phase, 400 V. Maximum clamping height: 300 mm. Lrodpfxewut Abo Ad Aoi

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. Ledpsrahzgofx Ad Ajri • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.