4 roll plate bender 3000 x 160 mm

Haeusler VRM-HY

Condition: good (used), Year of construction: 1998, control type: NC control, number of rollers: 4, roller (bottom) diameter: 540 mm, roller (top) diameter: 560 mm, side roll diameter: 420 mm, roller diameter: 440 mm, roller length: 3,100 mm, sheet thickness (max.): 60 mm, overall weight: 45,000 kg, total length: 8,700 mm, total width: 2,900 mm, total height: 3,075 mm, power: 81 kW (110.13 HP), Equipment: cone bending device, documentation/manual, 4 roll plate bender HAEUSLER - VRM-hy MACH-ID 9638 Make: HAEUSLER Type: VRM-hy Year: 1998 Smallest bending diameter 640 mm Pressing force against upper roll 5800 kN Conical bending attachment Central lubrication Equipped for change rolls 570 / 500 / 430 mm Rolling width: 3100mm Rolling thickness 3x toproll Ø:50mm Rolling thickness 5x toproll Ø:60mm Rolling thickness prebending: 40mm Top Roll Ø: 560+440mm Bottom Roll Ø: 540mm Side roll Ø: 420mm Number of rolls: 4 Fgodpjzbqqusfx Al Ueh Rolling speed: 0-6 Adjustiment lower roll: 0 - 200mm/min. Adjustment side rolls: 0 - 500mm/min. Number of driven rolls: 2 Power: 81kW Length: 8700mm Width: 2900mm Height: 3075mm Weight: 45000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2024, operating hours: 5,400 h, functionality: fully functional, A scrap shear (Lefort Trax 650) in excellent condition is for sale. Viewings can be arranged by appointment. The machine is available immediately. Fgodpfx Alez Ak Dvo Ujh

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Fodpfx Ajzxxgwel Usgh

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Fgsdpjnvfdbefx Al Ush

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 197 mm, Upon request, videos of the machine in operation can also be provided. Maximum turning length: 6000 mm Turning diameter: over cross slide: 1000 mm over bed: 1250 mm Spindle bore: 197 mm Spindle speeds: 0 – 665 rpm Faceplate diameter: 1200 mm Workpiece weight: 15000 kg between centers Motor power: 55 kW / 74 hp 3 gear stages: 1.5-55 / 50-180 / 180-665 rpm Accessories: Sauter 4-position tool turret (rotation defective) Tailstock (hydraulics partially defective, pressure loss) Chip conveyor 2 chip guard doors (incl. safety device) 4-way bed machine (flat bed) LED lighting Fgodpfxjyr N N Ro Al Ujh

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Fgodpfszka H Aox Al Ush

Condition: used, Year of construction: 2005, total length: 7,800 mm, total width: 1,700 mm, total height: 1,580 mm, Colour: Green Empty weight: 11.000 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 Fgsdozkkrvopfx Al Uoh - Number of driven rolls [pcs]: 2 - Max. sheet thickness [mm]: 12 - Max. prebending thickness [mm]: 10 - Max. working width [mm]: 2500 - Top roll diameter [mm]: 360 - Bottom roll diameter [mm]: 300 - Transport dimensions: 7800mm x 1700mm x 1580mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 104 mm, turning diameter: 870 mm, turning diameter over bed slide: 1,150 mm, Geminis GE 870 S lathe, with a 4000mm center distance, featuring a complete cast iron bed, dimension display, 870mm swing over the bed, automatic feed on the carriage, rapid traverse on the slides, a quick-change tool turret, 580mm swing over the cross slide, 1100mm swing over the tailstock, 340mm tailstock length, and speeds ranging from 16-1250 rpm. The spindle bore diameter is 104mm. It is equipped with a 3-jaw chuck with a 400mm diameter and a quick-centering mechanism, as well as a 4-jaw independent chuck with an 800mm diameter. It also includes 2 fixed steady rests and an additional universal 3-jaw chuck with a 315mm diameter. The main motor has a power rating of 18.5 kW. Overall, the lathe is in very good condition. Fgedpfezmp Hkjx Al Uoh

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 Fgedpfx Alex Sqc To Ush If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Fjdpfxjkvm Sze Al Usgh Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Fgodpeyzim Asfx Al Ueh Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Fgodpfokvm S Nox Al Ueh Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 200 mm, side roll diameter: 280 mm, roller length: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 7,250 kg, total length: 6,000 mm, total width: 2,000 mm, total height: 2,000 mm, power: 6 kW (8.16 HP), 4 roll plate bender HAEUSLER - VRM-HY MACH-ID 9604 Make: HAEUSLER Type: VRM-HY Control: HAEUSLER CNC Rolling width: 3000mm Rolling thickness 3x toproll Ø:4mm Fedpfx Aey Expuel Uogh Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 200mm Bottom Roll Ø: 280mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 6kW Length: 6000mm Width: 2000mm Height: 2000mm Weight: 7250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2007, operating hours: 500 h, functionality: fully functional, overall weight: 17,000 kg, fuel type: diesel, tank capacity: 4,000 l, color: blue, power: 704 kW (957.17 HP), output current: 1,270 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 704 kW (957.17 HP), nominal power (apparent): 880 kVA, total length: 14,500 mm, total width: 4,500 mm, total height: 3,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, type of cooling: water, Brand: Elbe Type: MT-825 CA Year of manufacture: 2007 Serial number: 10330 Operating hours (read): < 500 Power (kVA): 880 Power (kW): 704 Fgodpfx Aloyt Dqlo Ush Engine brand: MTU Engine type: 16V2000 Engine power (kW): 720 Fuel: Diesel Alternator brand: Leroy Somer Alternator type: LSA49.1L9 C6 S/4 Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperage (A): 1270 Dimensions LxWxH (mm): On request Weight (kg) approx.: 17000 Quantity in stock: 1 Country of origin: Germany Remarks: Complete set ex Standby, available for inspection in our yard Sales conditions: As is/where is, functional take-out

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Fgodpfjxwqdrox Al Uoh