Machine Tool

HAHNDORF REWK 86/14

Condition: ready for operation (used), Year of construction: 2007, A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible. Kfedpfx Agox Ih Dajzea

Condition: reconditioned (used), Robot welding machine with 2 m two-station turner. Offered is a robot welding machine from the company Yaskawa Motoman incl. RM2-250 turner Safety engineering Robot UP20 XRC Kodpod Tfb Nofx Agzofa nozzle cleaner etc. The system can be set up and put into operation by us. There is also the possibility of instruction and training. The plant is prepared according to customer requirements We are YASKAWA system partner and offer you the complete service for your Motoman robot and your systems.

Condition: used, The Mubea tools shown are not sold in their entirety. You can tell us what kind of punches and dies you need, so that we can put together an individual range for you. Kfsdjf Srpcepfx Agzea

Condition: used, Technical details: number of controlled axis: 6 workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: Kjdpfxeu Nwfbe Agzsfa -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Kfodpjl Sli Djfx Agzsa

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Ksdpfxjudlyms Agzjfa

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Kfedpfx Agewc A Rdozoa

Condition: new, table diameter 1000 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,25 U/min max. torque on the faceplate 900 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,37 + 0,75 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Kfodpfx Agofv Aw Ejzoa • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: used, Year of construction: 2004, current capacity 13,10 kVA number of controlled axis 6 Payload 16,00 kg Robot REIS - SRV16L A1 - axis 120 ° A2 - axis 195 ° A3 - axis 270 ° A4 - axis 360 ° A5 - axis 246 ° A6 - axis 720 ° Welding manipulator REIS - RDS26 workpiece weight 2.600 kg Rotating speeds 50 °/sek. table rotating 360 ° table swivelling +/- 180 Grad slewing speed 15 °/sek. welding unit FRONIUS wire dia. 0,80 - 1,60 mm Wire speed 0,50 - 22,00 m/min total power requirement 20,00 kW weight of the machine ca. 18,00 t dimensions of the machine ca. 10,00 x 4,00 H4,00 m Kfjdpfx Agjvxwzqszsa 2-station welding cell with - REIS SRV16L vertical articulated arm welding robot - RobotStar V control unit - 2x REIS RDS26 welding turntable - Welder FRONIUS TransPulsSynergic 5000 with cooling unit - Wire-feed-unit FRONIUS 4R/W/E Roboter

Condition: used, Year of construction: 2000, Motomann Robotec Welding process: MIG/MAG System type: RWV 32/32/32 Robots: 2* SK16MX 1* XRC Control system: S7-300 Control type: XRC Safety: Light barriers Program: P11861 Kfjdpfxewkgrzs Agzoa Text display: Siemens OP7 DP Text file: OP in S7 project Welding machine & power source: Fronius TPS Operating manual & software licenses: Available INCLUDES built-in YASKAWA XRC control system INCLUDES extraction system INCLUDES welding source INCLUDES base frame (on inverter)