Edge banding machine

Hartmann HM 585

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit - Milling unit - Fine milling unit Ledpfxod Inkts Agvern - Scraper blade - Buffing unit

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system Lredsx S Hmzjpfx Agven • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Year of construction: 1998, condition: excellent (used), Panel saw for Plexiglas and wooden panels with suction device Lrjdpfx Aoinunqegvon very good condition Max cutting height: 2200mm Max cutting length: 4200mm Max. cutting thickness: 60mm Length: 5600mm Depth: 1400mm Height: 2900mm Weight: 850kg

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 690924, Connected power: 380V, 1.84kW Speed: 2840 rpm Number of spindles: 21 pieces, pitch 32 mm Spindle spacing: 640 mm Spindle rotation direction: 11x right, 10x left, M10 thread 2x safety chucks pneumatic foot valve Table size: 880 x 400 mm 1x side fence with 2 folding stops 1x base fence 1x miter fence Lsdpjh U Damefx Agvsrn Unfortunately, we cannot respond to inquiries that do not contain complete contact information.

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. Ledpfx Agsrq D Niovern The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Ljdpfx Agjfxpbmjvern

Condition: excellent (used), Year of construction: 2022, operating hours: 208 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor Ljdpfx Agexd T Hcjvjrn - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Lrodjg Saqvepfx Agvon Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Condition: used, Year of construction: 2004, functionality: fully functional, CNC machining centre Homag Weeke Optimat BHC Venture 3, year 2004 for sale! Lredpfxox Ey H Io Agvon

Condition: good (used), Year of construction: 2014, functionality: fully functional, overall weight: 2,200 kg, KUKA KRC4 linear axis 1500/3T Article number: 8143983 Serial number: 143983 Lredpovzxg Tsfx Agvjn The KUKA KRC4 linear axis is a high-precision and robust motion unit that is ideal for industrial applications. It ensures precise control of motion sequences and plays a central role in automation processes and robotic systems within production. Its stable construction ensures consistently reliable performance, even in the most demanding applications.