Premilling unit

Holz-Her

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 417/1-505, functionality: fully functional, operating hours: 29,856 h, cutting height (max.): 80 mm, cutting width (max.): 3,100 mm, saw blade diameter: 350 mm, cutting length (max.): 4,200 mm, Equipment: scorer, The machine is still in operation and will be available starting October 9, 2026! TECHNICAL DETAILS Cutting length: 4,200 mm Cutting width (program slider travel): 3,100 mm Cutting height: 80 mm Saw blade overhang: 85 mm Min. clamping width: 0 mm Max. clamping width: 1,300 mm Saw units Main saw motor: 11 kW Main saw blade diameter: 350 mm Scoring saw motor: 1.5 kW Scoring saw blade diameter: 180 mm Motorized groove cutting device: 0–35 mm MACHINE DETAILS Software: Opti-Cut Display: 17″ TFT Control system: Opti-Cut Electrical data Operating voltage: 400 V (+10 % / -5 %) Mains frequency: 50 Hz Electrical connection rating: 20 kW Total weight: 6,200 kg Ppjdpfx Abjznbkkerow Operating hours: 29,856 h EQUIPMENT Angle stop on the left 7 roller rails 8 clamping devices Clamping device opening: 82 mm First clamping device with double finger 4 air cushion tables 1 central blower Labeling package including label printer Opti-Cut software installed Printing and clamping system Cutting height automation Pressure beam height control Angle and backstop device

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm Pedpfx Aohikzljbrepw -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Pjdpjvvkfdefx Abropw

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Podpsvvi Nbofx Abrspw Storage location: Nattheim

Condition: used, Year of construction: 2006, Technical details: table load: 22 t table diameter: 2500 mm Pjdpfsu Nkx Ijx Abrspw Total power requirement: 9,6 kW max. table load: 22.000 daN / 22000kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad swival range +/-: 120 Grad height of the swivelling axis: 1700 mm machine weight approx.: 12000 kg rotary table revolutions per minute : 0,05 - 1,0 U/min connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: used, Storage location: Nattheim Psdpfsvvkrdox Abropw

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Ppodpfjvvi Spsx Abrjw Storage location: Nattheim

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm -Total dimensions: 690/490/H300 mm -Weight: 72 kg Ppodpfx Aboqddi Uorsw

Condition: used, Holz Her Sprint 1329 Black Edition Heavy-duty version - edge thickness 0.4 - 8 mm (15 mm with tool change) 18.5" touchscreen control, Power-PC color display Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Automatic infeed guide rail 1350 mm MOT Edge magazine, fully automatic for coil and strip material MOT Glue application station GLU-JET cartridges - hot melt and PU gluing, thin-film technology Edge height max. 60 mm Glue height adjustment / sensor nozzle High-gloss package Pressing unit 1913 mot., motorized-pneumatic NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness with electro-pneumatic adjustment of 0-10° bevel of the cutting saw Multi-function milling unit MOT 6 - NC control axes: Flush trimming 8 mm (15 mm) Radius milling Chamfer milling 0 - 15° Copy milling unit MOT 4, corner copying, postforming corners with 4 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end edges, vertical edge, working height 60 mm Scraping blade unit MOT4 Surface scraping blade unit – finishing Buffing unit for final polishing and edge polishing with 2 textile discs Spray system for infeed and outfeed areas as well as antistatic agent at the pressing unit Podpfxjzdzlme Abrepw Infeed area: electronically controlled release agent spray device Pressing unit: electronically controlled antistatic spray device Outfeed area: electronically controlled cleaning agent spray device with cleaning agent First delivery 2018 / from lease return Machine is WORKSHOP OVERHAULED in TOP CONDITION Available from stock, Lieboch

Condition: used, Holz Her Sprint 1321, with edge banding and PU adhesive application Heavy-duty version – edge thickness 0.4 – 15 mm SPS-based Edgecontrol control panel Pjdpfxozp Hc Us Abropw Motorized, position-controlled bridge height adjustment Pre-milling unit for attachment before the gluing station Fully automatic edge magazine for roll and strip material Gluing unit with cartridge system + PU adhesive application Automatic glue height adjustment / touch probe nozzle Pressure unit 1913, pneumatic Trimming unit for roll and strip material 1918 – 15 mm With pneumatic adjustment for trimming saw angle from 0-10° Multi-function milling unit with motorized adjustment: flush trimming – 15 mm, radius and chamfer milling – 15° Profile milling unit – corner rounding 1833 Scraping unit for chamfers and radii 1929, pneumatic Pneumatic infeed and outfeed Surface scraping unit – finishing, pneumatic Buffing unit for finishing and edge polishing with 2 textile discs HIGH-END spraying system Complete set of tooling Machine is in FULLY OPERATIONAL CONDITION Machine from a craft business / consignment sale Available from stock in Lieboch, NET € 21,500.00

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity 1000 kg – Workpiece minimum Ø 50 mm – Workpiece maximum Ø 800 mm – Roller diameter 250 mm – Continuously adjustable speed – Foot pedal – Emergency stop Ppedpfx Aev A Rrkobrjw – Documentation – 230V

Condition: used, Year of construction: 2017, HOLZ-HER Edgebanding Machine LUMINA 1380 Used machine Year of manufacture: 2017 Condition: Well-maintained Motorized pressure beam adjustment Edge thickness, roll material: 0.4 - 3 mm Ppedpfxozpzy Us Abrew Edge thickness, strip material: max. 3 mm with unit FF701 max. 8 mm without unit FF701 max. 15 mm with tool change on the multi-function milling unit Edge height: max. 65 mm Workpiece thickness: 8 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: continuously variable, 10 - 18 m/min Control system Edge Control 19 with 18.5" touchscreen color display 16:9 ECO MODE energy-saving mode Infeed fence, 1350 mm long Motorized adjustment of infeed fence Joint milling unit 1802, edge feed MG701 SYNCHRO Glue application station Glu Jet GJ302 automatic (refurbished in 2026) Including changeover trolley Including quick-change couplings Including HSK mounting for the unit Including automatic unit detection GLU JET collection container Pressing unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatically pivoting 0/10° Milling unit FR701 6 fully digital NC servo axes. Profile milling unit FF701 4 fully digital NC servo axes. Scraper unit 1929 MOT4 incl. high-gloss kit Surface scraper FK701 Spraying system 1856 for the infeed and outfeed area Spraying system (release agent) after the pressing unit Automatic chain lubrication Adaptive pressure and glue quantity control Location: Bavaria Availability: approx. August 2026

Condition: used, Year of construction: 2019, Used machine Podszpzy Ispfx Abrepw Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Ppodpfx Aefv Huusbrew Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: used, Holz Her Auriga 1308 XL Black Edition compact design – edge thickness 0.4 – 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor Pre-milling unit for attaching before the gluing section Edge magazine fully automatic for coil and strip material Psdpjznuncofx Abrspw Glue application station GLU JET cartridges + PU gluing Fully automatic operation of the units via NC servo axes Workpiece height 6-60 mm Automatic glue height adjustment High-gloss package Pressure unit pneumatically controlled Cutting unit pneumatically controlled for coil and strip material up to 8 mm edge thickness with pneumatic adjustment of the cutting saw angle from 0-10° Milling unit MOT4, flush milling 8 mm, radius milling - chamfer milling via NC axes Shaping milling unit – rounding of edges up to edge thickness 3mm in a single pass via NC axes Scraping blade unit MOT for chamfers and radii with 2 scraping blade holders via NC axes Surface scraping blade unit – finishing Buffing unit – polishing Spray system in the infeed and outfeed area complete DIA tool set included First delivery in 2018 Machine in TOP CONDITION from a lease return available from stock in Lieboch