Bale press

HSM V-Press 825 plus pro

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Ijdpfx Adoyyy Dpj Rjib Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Year of construction: 1999, condition: used, System: Used decanter / centrifuge Iisdpfscbukrex Ad Reb Manufacturer: Baker & Hughes Model: full coat screw centrifuge Type: CP 3054 Year of construction: 1999 Hoechstzul. Speed: 3132 I/min Inner diameter drum: 552 mm Drum wall thickness: 14.5 mm Engine: 2 electric motors, new Auger motor Control Panel: no Frequency converter: Yes Documentation: Yes Maintenance: regularly twice a year In operation: By early 2015 Buying and renting possible.

Condition: as good as new (ex-display), PUMP WITH ATEX CERTIFICATION Rotary vane vacuum pump in oil bath. Available in stock. Completely overhauled pump. With warranty. Nominal flow: 30 m3 / h at 50Hz. Final vacuum: 1x10^-3 mbar abs. Any clarification, do not hesitate to contact us. Iisdpfxsftzgxj Ad Rsb

Condition: excellent (used), Year of construction: 1995, operating hours: 45,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale is a Loos steam boiler with Weishaupt oil burner. Gas burner available upon request. The unit is in very good condition. Model UL-S 5000, year of manufacture 1995. Steam output: 5,000 kg/h. Maximum steam pressure: 10 bar. Delivery available at extra cost. On-site inspection possible. Please contact us if you have any questions. Ijdpfoydq I Sox Ad Roib

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Iijdpjwra S Rjfx Ad Reb Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Iijdpoppddysfx Ad Reb Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: used, Year of construction: 2008, The Fischer milk pasteuriser 5000 is an industrial-grade machine designed for pasteurizing milk on a large scale. Here are some details about such a pasteuriser: - Capacity: The "5000" typically indicates that this pasteuriser can handle up to 5000 litres of milk per batch, making it suitable for large dairy processing operations. - Functionality: The pasteuriser is designed to heat milk to a specific temperature, holding it there for a required amount of time to eliminate harmful bacteria and pathogens while preserving the milk's quality and nutritional value. - Construction: Fischer machines are commonly made from stainless steel, ensuring hygiene and durability. The materials used are designed to withstand high temperatures and pressures encountered during the pasteurization process. - Design: It often features an insulated design for energy efficiency and may include a user-friendly control panel for monitoring and adjusting the pasteurisation parameters. - Efficiency: The pasteurising process is usually continuous, allowing for high throughput, which is essential for commercial operations to meet demand. - Temperature Control: It may include advanced temperature control systems to ensure precise pasteurization, which is crucial for product safety and quality. Iiedpex Tdausfx Ad Rob - Safety Features: Modern pasteurisers often come with safety mechanisms to prevent overheating or pressure build-up, ensuring safe operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers looking to process large quantities of milk while adhering to health and safety regulations. Capacity: 5000 Litres per hour Temperatures: 4-55-65-78(90) - 55-65-4 c Stages exchange plates : 5 Outlets: Separator / Homogeniser / De Aerator / Holding Tube DeAerator: Included Heated: Steam with Heat Exchanger and Steam Valve Positioning Balance Tabk: Included Chart recorder: In control panel Control Panel: Included Divert Valve: Included Product Pump: Included Skid Mounted: On Stainless steel Skid Hot water Pump: Included Electrical Requirements: 3 phase 400 V / 50/60 hz Cooling: Connection with old water connection Condition: Still in use Available: 3 weeks from order

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Iedpsq Sp Ekofx Ad Rjib Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: used, System Decanter used Type Guinard D3LLC-30B HP Machine number 3806 Year of manufacture 2003 Speed 3500-4000 rpm. Iiodewtckljpfx Ad Reb Drum diameter 340 mm Service If you have individual requests, please contact us. We are your specialist in sludge dewatering with over 40 years of experience.

Condition: excellent (used), Year of construction: 2014, operating hours: 8,900 h, machine/vehicle number: LP50VH2, 1) Technical specifications Press with conveyor Technical data baler: Manufacturer Presona Typ LP 50 VH2 Year of construction 2014 Press power main press 50 tons Specific press force 63 N/cm2 Feed channel 1,500 x 1,100 mm Filling volume 2,7 m3 Theoretic throughput capacity 730 m3/hour Throughput capacity under operating conditions 340 m3/hour Bale size 1,100 x 720 mm, lenght variable Drive power 45 kW Tying system 5-fold, vertical, fully automatic Throughput capacity at a • bulk weight of 30 kg/cbm 8 up to 10 tons/hour • bulk weight of 50 kg/cbm 11 up to 13 tons/hour • bulk weight of 100 kg/cbm 15 up to 22 tons/hour Bale density (paper, newspaper) 400 up to 550 kg/m3 Iodjyrhi Nepfx Ad Reib Filling volume hydraulic oil tank 600 l Weight baler 16 tons netto Scope of delivery: Press, electrical cabinet, control panel, chain conveyor The documentation (operating manual, CE declaration, electrical/hydraulic diagram) is complete. Visiting is possible by appointment. We are not responsible for technical information or any errors. Upon request, we can send video materials of the working press