Machining center with throughfeed

Hundegger K2

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT Safety light barrier Fjdpex I A A Djfx Agdopb

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides Fpedowrw D Rspfx Agdjb power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Year of construction: 2005, condition: ready for operation (used), Additional Equipment Infeed length: 8270 mm / Max. timber length, infeed: 16000 mm / Max. timber length, outfeed: 12000 mm / Infeed cross conveyor, 5-strand, 2200 mm / Extendable timber support table / AQF strand with shaft extension, 2900 mm / Under-table pivoting crosscut saw /Straight safety guard flap / Waste disposal downwards / Control for waste disposal system / Universal milling unit, 5-axis with profile cutter / Dovetail cutter / Finger joint cutter / Combination support for vertically operating tools / Drilling unit, 3.0 kW / Finger cutter 1 / Combination support for horizontally operating tools / Slotting unit, 480 mm / Drilling unit 1, 2.2 kW / Drilling unit 2, 2.2 kW / Marking device, reference side / Marking device, operator side / Pneumatic beam turning station / 7-arm outfeed table/ Extension roller conveyor, 5300 mm This HUNDEGGER K2-5-450 was manufactured in 2005. A robust timber framing machine, it excels in cutting, milling, drilling, and slotting for timber construction. Features include an 8.27m infeed length, extendable timber support, and multiple drilling units. Ideal for precise wooden component processing. Contact us for more information about this machine. Fodpfex D Ibhsx Agdopb Application Types Milling (Wood)

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 11441, At the moment we are working with the following version: 9.23.12.102733-12 The equipment of the K2: a 4-axis universal milling machine 2 drilling rigs a finger cutter below Fpjdpfx Agswvih Asdob a slotter Hydraulic beam turning station Machine is fully working, can be visiited upon agreed time. avaible from 30/11/2025 Disassembly from our company and loading to truck, and is included in the price. Sale is as a used machine with exclusion of any warranty.

Condition: excellent (used), Cambio debarking line, max. debarking diameter 450 mm, cross-feed conveyor with a length of 12.5 m Fpodpfx Agjwvhkvsdob

Condition: used, Year of construction: 2006, functionality: fully functional, Hundegger K2 450 Joinery Machine (UF5) with good equipment, well-maintained and reliable. For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept operational environment and has always been properly maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Max. timber length infeed: 14.5 m - Max. timber length outfeed: 13.0 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m with flat bar chain - Infeed strand with shaft extension 2.2 m - Extendable timber outfeed - Under-table swiveling cross-cut saw Fpedpfxsx Azrks Agdeb - Alternative disposal via bin - Control for disposal device - Universal 5-axis milling unit UF5 - Roller cutter - Finger jointing cutter - Dovetail cutter - Combination support for vertically working tools - Drilling unit 2.2 kW - Drilling unit 3.0 kW - Finger jointing cutter - Combination support for horizontally working tools - Drilling unit 2.2 kW - Swiveling drilling unit - Slotting unit, 900 mm, double-sided guide - Longitudinal and cross-groove milling unit - Marking and labeling device integrated in table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Available from: Autumn 2026 Location: Austria Price: on request All information subject to change; prior sale reserved. Sale ex location. No warranty or guarantee. Inspection and test run available by arrangement. If interested, just get in touch – we are happy to answer any further questions.

Condition: used, Year of construction: 2008, functionality: fully functional, overall weight: 24,000 kg, For sale: Hundegger K2i carpentry center, year 2008. The machine is in very good condition and comes excellently equipped, including: Fsdpfx Aexx T Rdjgdjpb - 13 m infeed table - Beam clamps with chain drive - 5-axis saw aggregate - 5-axis milling aggregate - Horizontal and vertical drilling - Additional end milling unit for processing rafter ends from below - Slotting unit with complete set of 8 and 10 mm chains Note: The slotting unit is rare equipment used for manufacturing trusses with concealed metal plates – a very useful feature. We can install this machine – we already have experience in installation and commissioning. Additionally, we can offer implementation services, meaning software training and assembly/mounting. The machine is in very good technical condition, regularly serviced and meticulously maintained, and is currently in operation. We are selling because we have purchased a much newer model. Note: Available for collection February–March.

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Fpsdeikvliopfx Agdeb Sawmill is located in Sweden.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 12762, cutting height (max.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and loading cross conveyor Under-table pivot cross-cut saw 11 kW 5-axis universal milling unit – UF5 Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Rear marking device (on the stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm timber rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for timber length 13 m 5-axis universal milling unit – UF5 Revolver milling unit – vertical from above Remote maintenance possible Control cabinet special arrangement Control unit for extraction with operating buttons Fsdpfx Agsxxa Dwjdspb Extension roller conveyor 7.10 m without drive Raising and lowering safety baffle plate

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11174, For sale: our used Hundegger fully automatic joinery machine, model K2, year of manufacture 2001 - Infeed and loading cross conveyor (6-strand) Fedpfxsxvychs Agdjpb - Underslung pivoting crosscut saw - Universal milling unit (UF4) - Combination support for vertically operating tools - Drilling unit 2.2 kW - vertical - Drilling unit 3 kW - vertical - Vertical finger-joint cutter 7.5 kW - Combination support for horizontally operating tools - Drilling unit 2.2 kW - Drilling unit 2.2 kW - horizontally swiveling - Slotting unit - Rear marking unit - Underside marking and labeling device - Fully automatic beam-turning station - Dovetail cutter - Transport and positioning device "two-hand system" - Electronic control - 5.30 m roller conveyor extension - 6-arm output table - Height-adjustable safety stop plate - AWF extension + timber feeder 13 m - Tooling included - Further details and accessories as shown in photos and available on request. The machine is fully operational and can be inspected by appointment. Available from Spring 2026. All documentation is present, regularly serviced by Hundegger, sold without refurbishment. Dismantling and collection by the buyer. The sale is made as a used machine with the exclusion of any warranty or guarantee.

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Fpjdpshlp Efsfx Agdsb

Condition: like new (used), Year of construction: 2015, I sell the automatic CNC working centre for wooden constructions Hundegger K2i. Almost new machine. Year 2011. Under-table rotary saw with saw blade from 750 mm to 800 mm, 360 degree rotation, servohydraulic tilting 0 – 65 degrees universal 5-axis unit equipped with cylindrical milling cutter, end mill and end mill, milling head diameter 350 mm x 100 mm end mill Fedpfx Aextxkxsgdepb combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min 460 mm, machining depth min 300 mm combi support for at least 5 tools with horizontal drilling device up to power from 2.5 to 3.0 kW, drilling diameter max 24 mm, drill length min. 460 mm, machining depth min. 300 mm positioning and gripping of the material using arms, which, while the material is measured, transported to the desired location, the arms keep the processed element as close as possible to the tool that processes it for stability. the processed material can be rotated automatically tolerance +/- 2 mm at a length of 13 m Fully automatic wood input with input roller track and input and sliding cross conveyor K2i: Under-table tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Kombisupport for vertically working tools K2i: Drilling device (2.2 kW) – vertical drilling direction K2i: Kombisupport for horizontally working tools K2i: Drilling device (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or on the user side) K2i: Fully automatic element rotation – hydraulic K2i: Transport and positioning system “two-hand system” K2i: Electronic connection K2i: Roller track for removal wooden elements with a pusher K2i: 5-arm storage table K2i: Safety device K2i: Higher quality upper surface of the machine K2i: Extension of the K2i frame to 13.56 m K2i: 5-axis universal milling unit - UF5 (increase to 4-axis) K2i: Remote maintenance (including portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Suitable for wooden house constructions! Available immediately.

Condition: good (used), Year of construction: 2011, Fully automatic wood infeed with feed roller conveyor Extension of transverse feed conveyor and feed roller conveyor for timber lengths up to 13 m Transverse loading and feed conveyor Under-table swing cross-cut saw Universal 4-axis milling unit (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW Combination support for horizontally operating tools Drilling unit 2.2 kW Longitudinal and transverse grooving mill Marking device at the rear (stop side) Fully automatic beam turning station – hydraulic Transport and positioning device "two-hand system" Electronic control with EKP software Roller conveyor for wood outfeed incl. extension (without drive) Component ejector 5-arm wood rack Fpsdpfowuppwex Agdjb Safety devices and protective guards

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Fsdevwfqqjpfx Agdspb

Condition: used, Year of construction: 2002, functionality: fully functional, cutting width (max.): 625 mm, Hundegger joinery system with mechanization 5 axes Working width: 625 mm with tools Fpsdpfxov Ubtcs Agdob