Through-feed machining center

Hundegger P10

Condition: good (used), For sale is a fully automatic, computer-controlled woodworking machine for carpentry elements by HUNDEGGER. This is a patented system, recognized as unrivaled on the market, guaranteeing precision, flexibility, and cost-efficiency in both serial and individual production. Planing dimensions 30x30. Gsdpfxexvnk Hs Ad Dsui

Condition: excellent (used), TECNI-ARMENTIA CH-70 edger - hydraulic control - the possibility of programming the width - saving up to 12 programs - centering table TECHNICAL PARAMETERS: cutting width max. 700 mm Gusdpoidmptjfx Ad Dji cutting height max. 130 mm main engine power 55 kW material width max. 830 mm length of the fixed sleeve 300 mm length of the movable sleeve 100 mm min. material length 700 mm spindle diameter 65 mm sleeve diameter 85 mm disc diameter 350 - 400 mm hydraulically smoothly adjustable feed feed speed up to 38 m / min feeding table 2700 mm roll width 700 mm roll diameter 140 mm centering feeding table two lasers pump motor power 4 kW row of anti-recoil pawls three upper pulling rollers three lower pull rollers hydraulic pressure hydraulic height adjustment dimensions (length / width / height) 480/200/230 cm weight 4000 kg

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1232, total length: 23,000 mm, total width: 7,200 mm, total height: 2,550 mm, workpiece height (max.): 260 mm, type of input current: AC, space requirement width: 7,200 mm, space requirement length: 23,000 mm, space requirement height: 2,550 mm, workpiece width (max.): 400 mm, table width: 400 mm, air pressure: 8 bar, overall weight: 14,000 kg, Sales Description: Hundegger ABM-B P10 Joinery Line + HMC Planing Machine Manufacturer: Hundegger Model: ABM-B P10 incl. HMC Year of manufacture: 1994 Condition: Used, fully operational Location: Germany Technical Specifications: Processing range: Up to 260 x 400 mm Saw unit: With block separator and open base Milling units: Notch milling unit with right/left milling head Half-lap milling unit with right/left milling head Finger milling unit Vertical milling unit (ø 300 x 100 mm) Drilling units: Vertical drilling device Horizontal drilling device Rafter nail drill Chain mortiser: Vertical top/bottom with automatic chain lubrication Horizontal with combination unit Additional equipment: Marking device at the stop Positioning chain feed Horizontal cross conveyor (2.2 m) Guedpfx Aoxrbizsd Doi Transfer cross conveyor (2.9 m) Ejector with storage supports Scraper control Planing Machine HMC (included): Year: 1994 4 feed motors 4 planing motors (7.5 kW) 4 bevelling motors Automatic centering unit Special Features: Fully automatic processing of single and series parts Control: PC-based with carpenter-friendly graphical interface + USB stick as floppy drive (BV transfer) Machine inspection under power possible Notes: All documentation available Self-collection only, ex works, without overhaul No warranty or guarantee Subject to prior sale

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1301, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters Gedpfow I Emkjx Ad Dsui - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. A large number of spare parts are included. Please do not hesitate to contact me for more information.

Year of construction: 2023, condition: new, Chopping height max. mm. 200 Infeed width mm. 500 Infeed rollers piece 3 Rotor flight circle mm. 600 Chopping length approx. mm. 20-30 output - output 16 - 20 rm/h chipping Chipper blade piece 2 Feed motors kW 2x2,2 Weight approx. net kg 4100 Inlet : horizontal machine base : steel, inert gas welded Rotor : steel, inert gas welded, dyn. balanced. Bearing : Oversized roller bearings. Godpfx Adjncd Azo Dsui Bearing housing : Steel, flanged housing. Feed rollers : steel, special toothed. Chip outlet : underneath the machine. Machine grate : (sieve) for secondary crushing of excess lengths. Drive pulley : Matched to main motor N=1500 min-1 Hydraulic system : consisting of: Hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting of the upper feed roller. Feeding : by 2 gear motors, Make NORD GEAR

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE HUNDEGGER P10 Gjdpfxowhn A Nj Ad Deui ROOF STRUCTURE PROCESSING MACHINE. THE MACHINE IS IN GOOD CONDITION, IT WORKED UNTIL IT WAS DISASSEMBLED AND DRIVEN TO THE LOCATION WHERE IT IS WAITING FOR A NEW OWNER. IT WAS TAKEN OUT DUE TO THE ARRIVAL OF TWO NEW MACHINES FROM THE SAME MANUFACTURER. THERE ARE MANY NEW SPARE PARTS THAT ARE NOT INSTALLED. THE PRICE IS NOT FIXED AND CAN BE NEGOTIATED UPON ARRIVAL AT THE LOCATION DURING THE INSPECTION OF THE MACHINE

Condition: not inspected (used), functionality: limited functionality, machine/vehicle number: 0.48.12.77180, Functional Holtec crosscut saw year of construction approx. 1980 Gsdjt Uhalepfx Ad Dsui

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Worked hours: 11.445 Engine: Cummins QSB 6.7 Godpfxjt Dlwyj Ad Deui Boom: K15 configuration, Safety check valves on boom and stick cylinders Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Undercarriage: Crawler hydraulic tele T41/380, triple shoes Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: used, Year of construction: 2002, functionality: fully functional, cutting width (max.): 625 mm, Hundegger joinery system with mechanization Gedev Ubtcspfx Ad Dsui 5 axes Working width: 625 mm with tools

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm Gjdpfjnyidbjx Ad Djui - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine