Hurco VMX 42

Hurco VMX 42

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Bsdjzapr Uopfx Abwjdc Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Bdsdpfxslbmtne Abwoc

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Operating hours: approx. 7,200 h EQUIPMENT Bdjdpfxjzaprzs Abwoc Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant system Bdedpfozam E Ejx Abwoc Chip conveyor Removable handwheel

Condition: ready for operation (used), Year of construction: 2004, operating hours: 30,826 h, travel distance X-axis: 660 mm, travel distance Y-axis: 355 mm, travel distance Z-axis: 455 mm, controller manufacturer: HURCO, controller model: Ultimax, overall weight: 3,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, number of axes: 3, This 3-axis Hurco VMX1 was manufactured in 2004. It features a maximum spindle speed of 10,000 rpm and a cutting feed rate of up to 11,400 mm/min. The machine has a table size of approximately 760 × 355 mm and offers a tool changer with 16 stations. If you are looking to get high-quality milling capabilities, consider the Hurco VMX1 vertical machining centre we have for sale. Contact us for further details. • Cutting feed rate: max. 11,400 mm/min • Table size: approx. 760 × 355 mm • Tool changer: 16 stations • Machine hours: 30.826 • Condition: Used, good overall condition; fully functional and ready for operation Bdjdpsylnbfsfx Abwoc Additional equipment • Coolant pump • Chip conveyor • Machine vise • 3D touch probe • Various collet sets / SK 40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2011, operating hours: 5,680 h, functionality: fully functional, Control system: WINMAX V08 Table dimensions: 1220 x 610 mm / D600 mm Table load capacity: 1000 kg X-axis travel: 1060 mm Y-axis travel: 610 mm Z-axis travel: 610 mm C-axis: 0 - 360 degrees A-axis: +/-92 degrees Spindle speed: 12000 rpm Spindle taper: SK40 Drive power: 11/18 kW Weight: 7500 kg Dimensions (LxWxH): 3200 x 2450 x 2650 mm Accessories / Features - NC rotary table - Swivel spindle - CTS 20 bar (Coolant Thru Spindle) Bdodpfx Aboy Ux Tfowec - Chip conveyor - Coolant system - RENISHAW zero-point measuring system with touch probe - Machine feet - Manuals The machine is in very good technical condition. Immediately available.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t Bdjdou Iddnjpfx Abwsc dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: ready for operation (used), Year of construction: 2012, operating hours: 2,050 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 30, number of axes: 5, This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details. Bdsdpfxey Nab He Abwjc • Operating hours: 2,050 h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Internal coolant system Additional equipment Bedpfx Aey Tw R Hebwedc • Chip conveyor Software Features Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating status Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, overall weight: 6,850 kg, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2013 and features X-Travel of 1067 mm, Y-Travel of 610 mm, and Z-Travel of 610 mm, with a tool holder SK40. If you are looking to get high quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information. • Spindle hours: approx. 12,603 h • Total power requirement: approx. 28 kVA Additional equipment Bdodpfjy Tw Rysx Abwoc • Chip conveyor • Internal coolant system Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, controller model: Ultimax, table width: 355 mm, table length: 760 mm, number of slots in tool magazine: 20, HURCO VM1 Vertical Machining Center The HURCO VM1 is a compact vertical CNC machining center, ideally suited for precise milling operations in single-part and small-batch production. The machine stands out for its robust construction, user-friendly control system, and efficient tool changing capability. Technical Equipment Worktable: 760 mm × 355 mm Equipped with machine vice CNC control: Ultimax Automatic tool changer with 20 tool positions Machine Condition and Design The machine features a fully enclosed safety cabin with large front windows. The control panel, including a display, operation keys, and emergency stop, is mounted on the side for ergonomic access. A chip collection tray is located beneath the working area. Bjdpfx Abjyxcykjwsdc Thanks to its compact footprint, the HURCO VM1 is especially suitable for workshops with limited floor space, while still delivering high performance and flexibility.

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm Bodpfx Abex R Enhjwsdc control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units Bjdpfxjy Uhnrj Abwjdc (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: used, Year of construction: 2003, x-travel 660 mm y-travel 355 mm z-travel 455 mm Bjdpfjyy A Anox Abwjdc table surface area 760 X 355 mm table load 1,5 t T-slots 3 T-slot - width 18 mm control ULTIMAX 4 tool change unit 16 max. tool diameter 90 mm max. tool length 200 mm max. tool weight 7 kg spindle turning speed range 10.000 U/min spindle drive 7,5 kW 16 St. tool adaptor SK 40 feed max 28 m/min rapid traverse 35/35/30 m/min dimensions of the machine ca. 1,8 x 1,9 x 2,4 m weight 3 t total power requirement 21 kW Used vertical machining centre with double-arm tool changer. HURO ULTIMAX 4 CONTROL 10,000 RPM

Condition: used, Year of construction: 2003, MACHINING CENTER HURCO VMX 42 YEAR: 2003 CNC: HURCO UltiMAX 4 Table: 1,270 x 610 mm Travels: X axis: 1,070 mm Y axis: 610 mm Z axis: 610 mm Spindle: ISO 40 DIN 69871 Speed: 10,000 rpm Power: 18 kW Tool magazine: 24 stations Bjdpfxjyup Urs Abwsdc Complete with chip conveyor Assorted tool holders included