Blade sharpening machine

HURTH SRS 400

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Nkodpfxjt Hwnve Afzot Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available.

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard Nksdpsh Rdwxjfx Afzjt - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Nkedpfx Aox I Nbtofzot Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, Smooth G control movements: X1/X2-axis: 207 /141 mm Y1/Y2-axis: 100/70 mm Z1/Z2-axis: 760/815 mm Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Main spindle 26 kW, A2-8spindle nose Main spindle max. speed 4.000 rpm Nkjdpfx Aemhihhefzet Main spindle max. bar capacity 80 mm Sub spindle 22 kW, A2-6 spindle nose Sub spindle max. speed 5.000 rpm 2 off. 12-station turrets 12 driven tool stations, power output 11 kW Max. speed driven tools 6.000 rpm Airblow upper/lower turret Airblow chuck main spindle Airblow for work transfer Coolant through sub spindle Preparation 8“ chuck sub spindle 10“ thru hole chuck BB210 main spindle Workpiece unloader and conveyor Overload detection Extended memory 8 MB 2 extra m-codes Cylindrical interpolation Auto pecking cycle with load detection Barfeeder interface kit Cromar Series III swarf management - Coolant filter - Swarf conveyor - 2 x 70 bar high pressure pump - 15 bar high pressure pump Mist extractor

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Nksdpfxjxpg H He Afzjt Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Five-axis tool grinding machine in very good condition for sale due to lack of use! Njdpjxw Sxksfx Afzjkt

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Nkodpfjvi Enaox Afzst Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. The adjustable mounting plate, is perfect for more tool holders like Rollomatic Concentricity Pro or HSK adapters or your own tool holders. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB

Condition: used, TECHNICAL DETAILS Floor space - Dimensions (length-depth-height) : 550 x 500 x 600 [mm] - Weight : 44 [Kg] Power supply - Voltage : 230 [V] - Supply : 50/60 [Hz] Njdeu Su Edopfx Afzokt

Condition: new, Year of construction: 2025, Nexturn SA32B with the following attachments: - Iemca Boss 338 bar feeder - Büchele SFB-100 high-pressure coolant unit Maximum machining diameter: 12 / 20 / 32 mm Maximum machining length: 160 / 210 mm Axes: 7 + Y1 Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for power supply to the machine and control with 200 V / 50 Hz, and chip conveyor designed for Nexturn machines with machine tank Modular system, all driven tools are manufactured by WTO, Made in Germany includes long parts discharge unit Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and sub spindle Main and sub spindle collet type standard Synchronously driven guide bushing unit Guide bushing type: standard Standard equipment tool holder Linear slides 5-position tool holder for shank 16x16mm 4 cross drilling units ER16 Drilling unit for front/rear face machining with 5 drilling spindles ER16 Sub spindle for backworking Backworking with 4 machining stations ER16 Drive unit for backworking tools: 2 fixed stations and 2 driven stations Pneumatic workpiece ejection device Part ejection control Blow-off unit for sub spindle Workpiece receiver Workpiece conveyor for discharging workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adaptation up to 100 bar) Coolant through sub spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar feeder Interface for chip conveyor PCMCIA card slot USB interface RJ-45 LAN interface RS 232 C interface Control features included in standard scope: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear offsets Operating hours display Workpiece counter Network connectivity Background machining Automatic power-off function Program execution via handwheel High-speed skip function for use of probes Spindle speed monitoring (G25 - G26) Thread cutting with variable pitch (G34) Helical thread cutting (G35 - G36) Cutter radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate transformation (G68.1 - G69.1) Multiple repeat cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main and sub spindle (G96 - G97) Cylindrical interpolation (G107) Nkodpfxevyzqfe Afzst Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and sub spindle (M56 - M57) 4 additional free M codes

Condition: used, TECHNICAL DETAILS In order to treat the emulsion mist and dusts - particles size : > 0.3 [μ] - induction flow : 660 [m3/h] Nksdsuhb Emspfx Afzst - vertical assembling - final filter precision is possible by prefiltration (3 washable and reusable prefiltration filters) - tension : 3x400 [V], 50 [Hz] - power : 0.55 [kW], 1.5 [A] - size : 610 x 450 x 800 [mm] - weight : 55 [kg]