HWACHEON Hi-TECH 230BL YSMC, year of manufacture 01_2020, internal number 231545

HWACHEON Hi-TECH 230BL YSMC

Condition: as good as new (ex-display), Year of construction: 2023, Control: Fanuc Turning diameter: 400 mm Turning length: 560 mm Swinging diameter: 690 mm Bar capacity: 81 mm Rapid traverse rate: 30 / 10 / 30 m/min Main spindle Bar capacity: 81 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle power: 25.5 kW Spindle torque: 424 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Power: 5.6 kW Torque: 53.4 Nm Bodpfxezw Uf He Afxell Tool interface: BMT-65 / BH Travel X: 240 mm Travel Z: 120 mm Travel Y: +/-60 mm

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition Bleded Swtaspfx Afxsl

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, General Control: Siemens 828 D Turning diameter: 400 mm Turning length: 560 mm Swinging diameter: 690 mm Bar capacity: 81 mm Rapid traverse rate: 30 / 10 / 30 m/min Main spindle Bar capacity: 81 mm Chuck size: 250 mm Spindle speed: 3,500 rpm Spindle power: 25.5 kW Spindle torque: 424 Nm Counter spindle Spindle speed: 5,000 rpm Spindle power: 10.5 kW Spindle torque: 90 Nm Tool turret Technology: 12 stations Tool drive: 5,000 rpm Bsdpjzl Ai Nsfx Afxoll Power: 5.6 kW Torque: 53.4 Nm Tool interface: BMT-65 / BH Travel X: 240 mm Travel Z: 120 mm Travel Y: +/- 60 mm Equipment Chip disposal: Chip conveyor Coolant supply: Extended, 140 liters Coolant pump: 15 bar high pressure Tool measurement: Measuring arm in the work area Part management: Pneumatic part ejector Part removal: Part collector Bar magazine: Prepared

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 6,000 mm, warranty duration: 12 months, total width: 3,600 mm, total height: 700 mm, WORKBENCH FOR ASSEMBLING WOODEN FRAMES Direct sale from the manufacturer BOOSTON MACHINERY CARPENTER'S BENCH · JOINER'S BENCH · ASSEMBLY TABLE FOR PREFABRICATION Available lengths: 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12.0m; 13.5m; 15.0m DIMENSIONS - Working length: 6000mm (other lengths available) - Standard width: 3600mm Bodpfxoyk H N Ee Afxell - Working height: 700mm - Workbench for self-assembly - shipped on a large pallet (cost saving for you) - Mounting holes for pneumatic clamps SD-01 - Option to expand with additional modules Additional options: - SD-01 pneumatic pressure cylinders - Option for pneumatically lifted rollers for horizontal transport (2 roller rows) - LS-01 base profile

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Bedpfxjxq Rrce Afxoll

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting Blsdoivaryopfx Afxel roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 8.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA Bledpfx Aexx A Ewofxol weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: used, Year of construction: 2015, Wall line, manufactured to produce walls for modular manufacturing. Used by a Swedish producer between 2015 and 2021. NOTE: Sold in its current condition. Station lengths: 7000 mm Station width: 2700 mm Station nr1: Framing station CAD/CAM (includes two nail tools) Station nr2: Working table Station nr3: Semi automatic nailing bridge (includes two nail tools) Station nr4: Working table - Upraiser table Bjdjxv Arxepfx Afxoll Station nr5: Multifunction portal CAD/CAM (includes four screw tools and milling unit) Station nr6: Working station - Receiver table - Moveable sideways Station nr7: Working station - Angle transmission Station nr8: Working station - Upraiser table Station nr9: Working station - Angle transmission Station nr10: Working station - Upraiser table

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Blsdpfxjud At Rj Afxsl

Condition: used, used, excellent condition, lightly used Manufacturer: Mafell Model: MKS 165 E CE type-certified Motor: 2.7 kW Brake motor Cutting height: 165 mm Blade diameter: 410 mm New price approx. €4,000.00 Bjdpfoycxhksx Afxjll Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as seen in current condition, without guarantee or warranty