CNC Vertical Machining Center

HwaCheon Sirius-2

Condition: good (used), Parts on table not come. Marked with red. Nwodpfx Aowxdyxof Uoi

Condition: good (used), Year of construction: 2008, operating hours: 15,110 h, functionality: fully functional, turning diameter over cross slide: 85 mm, turning length: 300 mm, turning diameter: 85 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 CNC lathe with Siemens control + Siemens ShopTurn! Condition: Very well-maintained, fully functional Nodpfx Afjyxvwie Uewi Location: Graz Manufacturer/Model: EMCO EMCOTURN E25 Control: Siemens (including Siemens ShopTurn) Year of construction: 2008 PICTURES/VIDEOS: For more pictures and videos of the machine in operation, please send us your request. Technical data: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm Tool turret: 12 stations Turning diameter: Ø 85 mm Turning radius: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 RPM Maximum: 6300 RPM Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Height: 1900 mm Scope of delivery: - EMCO EMCOTURN 25 CNC lathe - Stainless steel tray - Complete documentation Quality & Safety: The machine is impressive due to the typical EMCO quality "Made in Austria": Are you interested? Please contact us to arrange a viewing appointment or to request a quote.

Condition: used, Year of construction: 1999, turning diameter 450 mm Nsdpjvanvnofx Af Uewi turning length 380 mm control FANUC

Condition: good (used), Year of construction: 1999, Emco lathe PCturn 120 with accessories and documentation Nwjdjyhzfyepfx Af Uei

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Nwsdpfx Ajxmkcaef Uoi

Condition: like new (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, torque: 60 Nm, controller manufacturer: Siemens, controller model: 840D SL, total height: 2,390 mm, total length: 2,515 mm, total width: 1,700 mm, table load: 200 kg, overall weight: 3,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 30 h, number of slots in tool magazine: 24, tool length: 200 mm, tool diameter: 80 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a CNC milling machine Spinner VC450 from 2014 in very well-maintained condition. Nedpoy Hf Nqjfx Af Uowi Highlight: The machine is equipped with a new spindle with only approx. 30 spindle hours (no crash), professionally installed by the manufacturer Spinner – technically in excellent condition. Used Tested and fully functional Ideal for precision machining – ready for immediate operation. ➡️ Additionally available: A comprehensive range of accessories can also be purchased, including machine vises, SK40 tool holders, and other equipment. Inspection and test run possible by appointment. If interested, please get in touch.

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Nsdpfsyxnyisx Af Uswi

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,741 h, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, Horizontal turning machine manufactured in 2011. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available. • Availability: 2 units • Working range: • Swing over bed: 250 mm • Max. turning diameter: 85 mm • Max. turning length: 225 mm • Max. bar capacity: 25.5 mm • Distance between centers: 405 mm • Main spindle & drive: • Spindle connection: Ø 70 h5 • Max. chuck size: Ø 100 mm • Max. torque: 35 Nm • C-axis resolution: 0.001° • Tooling system: • Turret: VDI 16 disk turret with directional logic • Tool stations: 12 • Tool shank cross-section: 12 x 12 mm • Feeds & axis performance: Nodpeympxnefx Af Uswi • Feed force (X / Z): 3000 N / 3500 N • Rapid traverse (X / Z): 15 m/min / 24 m/min • Positioning spread (Ps): 3 µm • Utilities: • Supply voltage: 400 V (3/PE) • Total connected load: 6 kVA • Coolant tank capacity: 140 liters • Sound pressure level: 78 dB(A) Additional equipment • Chip conveyor (referenced in the stated machine weight)

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 420 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 240 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 810D, workpiece height (max.): 190 mm, total height: 2,450 mm, total width: 2,400 mm, table width: 325 mm, table length: 850 mm, table load: 150 kg, overall weight: 2,900 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 12, tool weight: 5,000 g, positioning accuracy: 0.004 mm, product length (max.): 2,300 mm, number of axes: 3, This EMCO VMC 300 Vertical Machining Center was manufactured in the year 2003 in Austria. It is equipped with a Siemens SINUMERIK 810D control unit. The machine features a 12-position automatic tool changer, an SK40 spindle with speeds up to 5,000 rpm, and travels of 420 × 330 × 240 mm (X/Y/Z), making it suitable for precise milling, drilling, and tapping operations. For more information, contact us. • 2x units available (one newer and one older) with different Control Brands • Distance from Spindle Nose to Table: 210 – 450 mm • Number of T-Slots: 3 • T-Slot Width: 14 mm • T-Slot Spacing: 100 mm • Spindle Bearing Diameter: Ø60 mm • Bearing Type: Angular Contact Ball Bearing • Tool Taper: SK40 (DIN 69871 / ISO 7388-I) • Pull Stud: M16 (DIN 69872 / ISO 7388-II) • Automatic Tool Clamping • Tool Clamping Force: 6,000 N • Spindle Overhang: 330 mm • Spindle Motor Power: 9 / 11 kW (100% / 60% Duty Cycle) Nwjdsya Hg Nspfx Af Uoi • Optional Spindle Speed: 0 – 8,000 rpm • Maximum Torque: 100 Nm (5,000 rpm) / 78 Nm (8,000 rpm Option) • Noise Level: 72 dB(A) at 5,000 rpm • Milling Capacity in Steel (16MnCr5 – 790 N/mm²): 220 cm³/min • Maximum Drilling Capacity in Steel: Ø25 mm • Maximum Tapping Capacity in Steel: M20 • AC Servo Drives with Ball Screw Spindles • Feed Rate (X/Y/Z): 0.01 – 12,000 mm/min • Rapid Traverse (X/Y/Z): 12 m/min • Feed Force X/Y: 6,000 N • Feed Force Z: 8,800 N • Resolution: 0.001 mm • Tool Carrier: Drum Type with Direction Logic • Automatic Tool Changer • Maximum Total Tool Weight in Magazine: 36 kg • Maximum Tool Diameter: 100 mm • Maximum Tool Length: 220 mm • Tool Change Time: T1: 5.8 s / T2: 3.9 s / T3: 3.9 s • Chip-to-Chip Time (VDI 2852): T1: 8.9 s / T2: 7.0 s / T3: 7.0 s • Coolant Tank Capacity: 100 L • Coolant Pump Flow Rate: 10 L/min • Maximum Coolant Pressure: 3.7 bar • Coolant Supply: 4 External Nozzles • Automatic Central Lubrication for Guideways and Ball Screw Spindles • Grease Lubricated Main Spindle Bearings • Power Supply: 3/PE ~ 400 V / 50–60 Hz • Maximum Voltage Fluctuation: +5% / -10% • Connected Load: 15 kVA • Rated Current: 22 A • Maximum Current: 25 A • Main Fuse: 35 A (Slow-Blow) • Required Short-Circuit Power: 1600 kVA • Pneumatic System Pressure: 5 – 10 bar • Minimum Air Flow: 750 L/min • Average Air Consumption: 180 L/min Additional Equipment • Automatic 12-Position Tool Changer • Automatic Central Lubrication System • Coolant System with 4 External Nozzles • Automatic Tool Clamping System • SK40 Spindle Interface Machine Benefit: • Reliable 12-Station Automatic Tool Changer • Integrated Automatic Lubrication System for Guideways and Ball Screw Spindles Dimensions Machine Depth 2300 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1994, Control Unit Nwsdpsx D Nq Refx Af Uji Brand FANUC Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling