Single-side Edge bander

IMA Advantage 700

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 3 - 12 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS open TS Feeding speed (adjustable) m/min 4 - 20 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pedpfx Agjflc Uhozerf Pre-milling Unit (vertical joint trimmers) 08.376 (2 x Kw 3) Glueing Unit (Hot Melt Glue) 283.1513 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.415 (2 x Kw 0,66) Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (2 x Kw 0,66) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.612 (2 x Kw 0,25) Free space

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Predpfx Agovvkfdozsf

Condition: excellent (used), Year of construction: 2008, operating hours: 22,000 h, functionality: fully functional, feed length X-axis: 8,000 mm, feed rate X-axis: 20 m/min, total length: 8,600 mm, workpiece height (max.): 60 mm, total width: 1,700 mm, edge thickness (max.): 3 mm, total height: 1,850 mm, overall weight: 4,400 kg, compressed air connection: 7 bar, height adjustment type: electric, input voltage: 400 V, input current: 54 A, product height (max.): 60 mm, pressure: 7 bar, IMA ICOSTS control, touch panel, edge band magazine, 2x spraying devices, pre-milling unit, preheating zone, crosscut saw, straight and radius milling units, corner rounding unit, scraper unit, smoothing unit, polishing unit. Industrial machine in very good technical condition, kept in constant operational readiness. Operated in a single-shift system. The device has been used exclusively as a support unit during periods of increased order volume. Prsdexctwrspfx Agzsf A video of the machine in operation and additional photos can be provided to interested parties.

Condition: excellent (used), Year of construction: 2009, Year of production: 2009 Prodpfx Agerur Urszjf Manufacturer: IMA Technical condition: good, regularly serviced. Pre-cutters: New, installed about a month ago, made of diamonds. Flat cyclers: Replaced, a better version was installed, as can be seen in the attached photos. Technical documentation: Available as a PDF file, if required. Additional information: The machine is running efficiently thanks to new pre-cutters, which were installed recently and worked for about a month. The flat cyclers have also been replaced with a better version, as can be easily identified by reviewing the attached photos. Feel free to call us for more information or to schedule a time to see the machine. Technical documentation in the form of a PDF file is also available to provide full clarity on the machine's specifications and operation.

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 - Milling station motor adjustable (MOT4) DIA- tool - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) - Surface scraper Prodpfx Agoma Sg Rszsf Dimensions: 454 cm length 120 cm width 161 cm height (upper edge of control panel)

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 12/2026, year of last overhaul: 2025, total length: 700 mm, total width: 480 mm, input frequency: 50 Hz, type of input current: three-phase, inner diameter: 450 mm, electrical fuse: 16 A, Dough mixer Diosna model: SP 24 D 2 timers & 2 speeds Psdpfxjv Atryj Agzjrf Flour dust cover For up to 24 kg dough TOP spiral mixer Exclusive to us: DGUV V3 inspected Connection: 400V, 16A CEE plug Refurbished used machine with warranty Option: Maintenance contract Service package Delivery service Instruction & commissioning Many more TOP spiral mixers available from us!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 151 kg, Vacuum Pump Becker VTLF 2.250 NEW! ON STOCK Price: 2,990 EUR + VAT Pedpfx Agsvc D Ulozjrf The Becker VTLF 2.250 vacuum pump is an oil-free vacuum pump designed for continuous operation. It uses graphite composite vanes that require no lubrication. Only minimal maintenance is needed and no oil changes are required. TECHNICAL DATA: -Motor power: 5.5 kW -Operating voltage: 400V -Motor speed: 950 rpm -Vacuum: 200 mBAR -Noise level: 79 dBA -Weight: 280 kg ADVANTAGES OF THE VTLF 2.250 VACUUM PUMP: -100% dry operation -Compact design -Low operating and maintenance costs -Quiet operation – no need for silencer housing -Oil-free operation -Easy maintenance -Air cooling -Long service life of graphite vanes -Built-in internal filter -Complies with ISO standards and C.E. regulations

Condition: ready for operation (used), Technical characteristics pressure 2.2 kg / cm² 18 kW diathermic oil boiler timed pressing digital display Power and Motors Voltage: 400 V Pluging: Three-phased Power: 20 Kw Overall dimensions Lenght: 3500 mm Width: 1500 mm Podpfx Agot N Autszsrf Weight: 3200 Kg

Condition: used, PTP VPU 1 Conventional milling machine Table dimensions: 260x1000mm Taper: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speed Vertical and horizontal use Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or mail for more information See also our other advertisements We are also looking for industrial machines throughout the year. Do you have redundant machines, mail them to us with pictures and information. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 conventional machines Table dimensions: 260x1000mm Cone: 40 mm X axis: 500 mm Y-axis: 300 mm Z-axis: 400 mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in Grad With vacuum pump Standort: Hamont-Achel, Belgium Für weitere Informationen rufen Sie an oder senden Sie eine E-Mail Sehen Sie sich auch unsere anderen Anzeigen an Prjdpferzbktjx Agzsf Wir sind auch das ganze Jahr über auf der Suche nach Industriemaschinen. Wenn Sie über redundante Maschinen verfügen, senden Sie uns diese per E-Mail mit Fotos und Informationen

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders Pjdpexwurysfx Agzjrf - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled