Twin pallet 630mm HMC

Kia Centre H63

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg Hnsdpfx Aex Sqptjgkek

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 Hedew Rm Dispfx Agkjnk IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Hnodpfx Aovfm H Asgkek Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, workpiece length (max.): 1,000 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 120, controller manufacturer: FANUC, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, controller model: FS-31IA (MAPPS III), feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 14,000 rpm, tool length: 500 mm, workpiece diameter (max.): 800 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Hnodpfx Agsvw Sc Tskjk Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Hodpex Awzbofx Agksnk X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Year of construction: 1955, condition: used, Radial drilling machine, drilling machine, boom drilling machine Hjdpfx Agod Enr Iokjnk -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Hnodpfevca Izox Agksk Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2005, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, total height: 1,840 mm, overall weight: 5,100 kg, controller manufacturer: MAZATROL, number of axes: 3, This 3-axis Mazak Quick Turn NEXUS 200MS was manufactured in 2005. It features a maximum turning diameter of 380 mm, main spindle speed up to 5000 rpm, and a sub-spindle speed of 6000 rpm. The machine includes a Mazatrol 640T Nexus CNC control and has a robust design with dimensions of 2765x1780x1840 mm, weighing 5100 kg. If you are looking to get high-quality turning capabilities consider the Mazak Quick Turn NEXUS 200MS machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Maximum turning diameter: 380 mm • Maximum bar diameter (main spindle): 65 mm • Maximum bar diameter (sub-spindle): 42 mm • Distance between spindles: 580 mm Extra Information Machine has only worked in small batch 1-shift production. Hedpfxjx D Rmto Agkenk Dimensions Machine Depth 2765 mm

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): Hnedpfewxygzox Agksk X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D 48-tool changer, Capto C8 tools Hsdowzyn Repfx Agkjnk chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg