Eccentric presses

KK Kletzer Exzenterpresse EE-PK100

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Bjdpfxshz Ua So Agcslr

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 25.12.01, Fresan FP 130P - C Frame Eccentric Press - 130 Tons (1300kN) TECHNICAL DATA: * Power: 130 tons (1300kN) * Strokes Per minute: 55 (variable) * Ram-Table Distance: 500 mm * Stroke Adjustment: 0 - 132 mm * Ram Adjustment: 95 mm (motorized) * Table Dimensions: 700 x 1000 mm STANDARD SPECIFICATIONS: * Conformity to CE safety regulations * Welded steel frame * Crankshaft made of AISI 4140 (42CrMo4) alloy steel. Highly durable and ductile. CNC ground for minimum surface friction. * SnBz-12 quality bronze bearings * Pneumatic clutch-brake combination * Fully closed gearbox with helical gears working in oil * Double body press safety valve * Safety PLC & light curtains & safety switches (Pilz) * Ram with 6 slides & waste oil collector * 7-inch HMI touchscreen operator panel * Speed control with AC inverter * Motorized ram adjustment * Mechanical fuse for overload protection (Hydraulic fuse can be installed on standard a machine after purchase) * Pneumatic counterbalance cylinders (ISO, 4 pcs) * Automatic central lubrication & used oil collectors (Thin oil / slideways oil) OPTIONAL EQUIPMENT: * Additional work table * Part ejector mechanisms(upper and/or lower ejectors) * Material feeding, loading & unloading systems (Decoilers, straighteners, pneumatic & servo feeders...) * Special design / customized machine Bjdpfx Agenyh Siecolr

Year of construction: 1973, condition: good (used), 1 used spline shaft grinding machine make Fritz Werner type FKR 16 year 73 No. 5275/8012 technical data center height 185 mm max.grinding length1600 mm passage diameter 55 mm Bedjn Atchjpfx Agcjlr pitches 4-32 L 5900 x W 2300 x H 2000 mm weight 7 to

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Bsdpfx Agjrm Ntpecelr Adjustable stroke 20 - 140 mm Stroke rate 70 1/min. Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: excellent (used), pressure 125 t Bedpfx Aet Eix Regcelr throat 400 mm stroke 6 - 125 mm ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, TECHNICAL CHARACTERISTICS: Press Model: T130R CE Serial number: 11911 Year of construction: 2004 Nominal force: 1300 kN Nominal stroke: 7.5 mm Adjustable stroke: 16÷200 mm Stop position: TDC Ram adjustment: 100 mm Stop time: 190 ms Strokes per minute min./max.: 10/55 Maximum mould surface: 600 x 1100 mm Maximum closed mould height: 452 mm Min. closed mould height: 260 mm Upper mould mass: 140 kg Flywheel revolutions per 1°: 411 Max. insertions at 1°: 28 Installed power: KW 11 Voltage: V400 Auxiliary voltage: V24 Operating air pressure: BAR 5.5÷6 Mass: Kg. 10,000 Bljdpfjv Iktljx Agcjr Motorized hammer adjustment Hydraulic overload safety Inverter Complete with user manual and CE conformity and 6 months warranty. • Work surface revived on CNC machine; NEW COMPONENTS INSTALLED: • Safety guards complete with safety keys; • Clutch plates; • Motor; • Motor pulley; • Motor belts; • Clutch pins and brite; • Swivel joint bearings; • Motorized hammer adjustment worm screw bearings; • Flywheel bearings; • Electric panel with touch screen; • Pedal board; • Air pressure gauges; • Hammer overtravel sensor; • Balancer cylinder gaskets.

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Bledpfsttbd Tjx Agcsr

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Bledpswaiw Ssfx Agcor Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: good (used), Year of construction: 1974, pressing force: 100 t, Model: OB1 Pressing force: 100Tm Torque: 3500kg Plate thickness: 10mm Blodpfx Aoudwr Ujgcer Pusher slider: 5-159mm Distance between table and spindle/pusher: 530mm Max. spindle/pusher travel: 130mm Strokes per minute: 53

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Bedpfx Agektm N Dscslr